All Products
Showing 1-20 of 47 products · 13 unavailable products hidden
9g micro servo (1.6kg)
Bulk 9 Gram Servo - 10 pack
Micro Servo 9g
TowerPro SG90C 360 Degree Micro Servo (1.6Kg)
9g 270°Metal Servo with Analog Feedback (1.5kg)
9g 180° Metal Servo with Analog Feedback (1.5kg)
9g 180° Clutch Servo
9g 300° Clutch Servo
Servo - Hitec HS-85MG (Micro Size)
Servo - Generic (Sub-Micro Size)
MiniQ Discovery Robot Kit
SunFounder 9g Metal SF180M Digital Half Metal Semi-metal Micro Servo 2pack
Servo - Generic, 180° Rotation (Sub-Micro Size)
MPN: ROB-24052
Servo - Generic Continuous Rotation (Micro Size)
9g Metal Gear Micro Servo (1.8Kg )
35KG High Torque Metal Waterproof Servo
Servo - Generic High Torque (Standard Size)
45KG Torque Brushless Waterproof Servo
Servo - Generic High Torque Continuous Rotation (Standard Size)
1000:1 Micro Metal Gearmotor HP 6V
9g micro servo (1.6kg)
A lightweight 9g micro servo with 1.6 kgf·cm of torque at 4.8V. Ideal for small-scale robotics, beam robots, and automation tasks where a compact, affordable servo is needed. At only 9 grams, it fits into tight spaces while providing reliable performance. Specifications Operating Voltage – 4.8...
Bulk 9 Gram Servo - 10 pack
A bulk pack of ten 9-gram micro servos — an affordable way to stock up for robotics, mechatronics, and RC projects. Each servo includes a ~25cm cable with a standard 3-pin female header, plus a full set of horn and screw accessories. These compact servos deliver 1.6 kg/cm of torque at 6.0V with ...
Micro Servo 9g
This high quality micro-sized servo is an affordable and simple to use servo for all your mechatronic needs. This servo can operate from 3.0v-7.2v and delivering 1.6kg/cm maximum torque at 0.10 sec/60° The micro servo comes with a 3 wire ground, power and control cable with a three pin female ...
TowerPro SG90C 360 Degree Micro Servo (1.6Kg)
INTRODUCTION The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc. A 360 degree servo's operation is more similar to a DC motor than a standard s...
9g 270°Metal Servo with Analog Feedback (1.5kg)
A 9g micro servo with an extended 270° rotation range, metal gears, and built-in analog feedback (0–3.3V). The wider rotation range makes it suitable for applications requiring more travel than a standard 180° servo, while the analog feedback signal enables closed-loop position control via an MCU...
9g 180° Metal Servo with Analog Feedback (1.5kg)
A 9g micro servo with 180° rotation, metal gears, and built-in analog feedback (0–3.3V). The analog feedback signal allows connection to an MCU for closed-loop position control, providing more precise operation than standard open-loop servos. The compact 22.9 × 12.2 × 32.5mm body fits into tight...
9g 180° Clutch Servo
A 9g micro servo with 180° rotation and a built-in clutch mechanism that protects the servo from damage when external forces are applied. If the servo angle is changed by an external force during operation, the clutch allows it to automatically reset and continue working without stripping gears o...
9g 300° Clutch Servo
A 9g micro servo with 300° rotation and a built-in clutch mechanism that protects the servo from damage when external forces are applied. If the servo angle is changed by an external force during operation, the clutch allows it to automatically reset and continue working without stripping gears o...
Servo - Hitec HS-85MG (Micro Size)
The Hitec HS-85MG packs impressive torque into a micro-sized package. With metal gears and a single ball bearing, this servo delivers up to 3.4 kg·cm (48.6 oz·in) of torque at 6V while weighing just 21.9 g — making it an excellent choice for compact robotics, RC models, and mechatronic projects. ...
Servo - Generic (Sub-Micro Size)
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60° This small servo comes with a standard 3 ...
MiniQ Discovery Robot Kit
The MiniQ Discovery Robot Kit is a 2WD mobile robot platform based on the MiniQ chassis and the Romeo V2 All-in-One Arduino-compatible controller. It comes with a Sharp GP2Y0A21 distance sensor and 9g micro servo pre-included, making it ready for obstacle avoidance and sensor-based navigation rig...
SunFounder 9g Metal SF180M Digital Half Metal Semi-metal Micro Servo 2pack
Product descriptionTest Environment StandardEvery characteristic of the inspect must be normal temperature and humidity carry out the test,temperature 25±5℃ and relative humidity 65±10% of judgment made in accordance with this specification standard testing conditions. Electrical Specificat...
Servo - Generic, 180° Rotation (Sub-Micro Size)
· MPN: ROB-24052
Here is a simple, low-cost servo for all your mechatronic needs. This little guy is able to take in 6 volts and deliver 1.5kg/cm (at 6V). of maximum torque at 0.09 sec/60° (at 6V). This small servo comes with a standard 3 pin power and control cable, six arms and six screws. Note: This is the s...
Servo - Generic Continuous Rotation (Micro Size)
Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60° A standard 3-pin power and control cable is attached and all hardware listed below is included. Featu...
9g Metal Gear Micro Servo (1.8Kg )
A compact 9g micro servo with metal gears, delivering 1.8 kgf·cm of torque at 4.8V. The metal gear train provides significantly better durability than plastic versions, especially in robotics applications where the servo is in near-constant motion. With a 180° operating angle and a 320:1 reducti...
35KG High Torque Metal Waterproof Servo
A high-torque digital servo with all-metal gears, an aluminium shell, and IP67 waterproof rating. Delivers up to 35 kg·cm of stall torque at 7V, making it suitable for demanding robotics applications, multi-joint mechanisms, and outdoor projects where water exposure is a concern. The MOS-driven ...
Servo - Generic High Torque (Standard Size)
A reliable, high-torque standard-size servo (FS5106B) with dual ball bearings and nylon gears. Delivering up to 83.47 oz-in of torque at 6V with a speed of 0.16 sec/60°, it's a versatile choice for robotics, RC, and mechatronics projects. Features a standard 3-pin power and control cable with 18...
45KG Torque Brushless Waterproof Servo
A high-torque brushless waterproof servo delivering up to 45 kg·cm of stall torque at 8.4V. The all-metal gear train and aluminium shell provide exceptional durability, while IP67-rated waterproofing — achieved through laminated circuit boards, waterproof gaskets, and breathable composite sealing...
Servo - Generic High Torque Continuous Rotation (Standard Size)
Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-pin power and control cable is attached and all hardware listed below is included...
1000:1 Micro Metal Gearmotor HP 6V
A 1000:1 micro metal gearmotor from Pololu's popular N20-size range, featuring a high-power (HP) 6V brushed DC motor with precious metal brushes. With the highest gear ratio available in this series, it delivers extremely low output speeds and very high torque relative to its tiny size. At 6V wi...
