All Products

SKU: AF-3310

A 5.5×2.1mm DC barrel connector plug for adding a standard power connector to the end of your own wires. The outer shell unscrews to reveal solder terminals and a crimp strain relief, making it easy to wire up custom power cables. This is the most common barrel jack size used with Arduino boards...

SKU: DF-FIT0783

A DC 5.5×2.1mm female to Micro-USB male power adapter plug, allowing you to power Micro-USB devices from a DC barrel jack power supply. Useful for powering Raspberry Pi, LattePanda, phones, and tablets from existing DC supplies. Specifications Input (Female) – DC 5.5×2.1 mm barrel jack Output...

SKU: DF-FIT0784

A DC 5.5×2.1mm female to USB Type-C male power adapter plug, allowing you to power USB-C devices from a DC barrel jack power supply. Useful for powering Raspberry Pi 4/5, LattePanda, and other USB-C-powered boards from existing DC supplies. Also available in a Micro-USB version. Specifications ...

SKU: SF-COM-16473

The classic 555 timer/oscillator IC from Texas Instruments — one of the most versatile and widely used integrated circuits in electronics. With just a few external resistors and capacitors, it can generate timing delays from microseconds to hours, produce square wave oscillations, and drive LEDs,...

SKU: AF-5917 · MPN: ADA5917

A 5.5×2.1mm DC barrel polarity reversing cable that swaps centre-negative to centre-positive (or vice versa). Simply plug it inline between your DC power supply and device to reverse the polarity — no rewiring required. This is useful for powering devices that use centre-negative barrel jacks (s...

SKU: LB-LS0667

This 55-piece plastic gear pack contains an assortment of gears in various sizes and tooth counts for building custom drive trains, mechanical linkages, and DIY motorised projects. Pair them with a small DC motor to create gear reduction systems, conveyor mechanisms, or simple robotic drives. Ke...

SKU: SF-COM-30219 · MPN: COM-30219

This general-purpose surface-mount resistor provides a 560k Ohm value in a compact standard 0603 package, making it suitable for dense PCB layouts and everyday electronics work.It uses a thick film composition and is rated at 1/10W (0.1W) with ±5% tolerance. The part is AEC-Q200 qualified, suppor...

SKU: DF-DFR0550-V2 · MPN: DFR0550-V2

A 5-inch IPS capacitive touchscreen display with 800×480 resolution, designed for direct connection to Raspberry Pi via the DSI interface. Features optical bonding (full lamination), anti-fingerprint and anti-glare surface treatment, and a high brightness of 550 cd/m² — performing well even in ou...

SKU: DF-DFR0550

A 5-inch TFT capacitive touchscreen display with 800×480 resolution, designed for direct connection to Raspberry Pi 3B and 3B+ via the DSI interface. The display is powered directly from the Pi — no external power supply required. A potentiometer on the back allows hardware backlight adjustment. ...

SKU: AF-6397 · MPN: ADA6397

E-Ink and E-Paper displays are ideal when you need a low-power screen that stays readable in daylight and keeps showing its image even after power is removed. This bare 5.83" monochrome panel gives you a paper-like black-on-white display for custom projects, dashboards, labels and other static in...

SKU: DF-SEN0521

The 5.8GHz Microwave Radar Module is a high-sensitivity motion detection sensor that transmits and receives 5.8GHz electromagnetic waves. By analysing the difference between transmitted and reflected signals, it reliably detects movement within its detection zone. Unlike traditional PIR sensors ...

SKU: WS-19297 · MPN: 19297

This 5G omni-directional antenna provides 18dBi gain across a wide 600–6000MHz frequency range, covering 5G, 4G, 3G, and GNSS bands. The omni-directional radiation pattern delivers consistent signal quality in all directions without needing to orient the antenna toward a specific tower. It conne...

SKU: EC-DIS05490T

This 5-inch HDMI-compatible display features an 800×480 TFT-LCD panel with 5-point capacitive touch, making it a versatile monitor for Raspberry Pi projects, mini PCs, and single-board computers. Touch input works over USB with no driver installation required — just plug and play. The display in...

SKU: LB-LR0120

This 5-inch HDMI TFT LCD touch screen plugs directly onto a Raspberry Pi via the GPIO header and HDMI connector, providing an 800×480 resolution display with SPI-based touch input. It draws power from the Pi's GPIO pins, so no separate power supply is needed. The display connects via HDMI for vi...

SKU: LB-LR0120-PI4

This 5-inch HDMI TFT LCD touch screen is designed for Raspberry Pi 4, plugging directly onto the GPIO header with an HDMI connection for an 800×480 resolution display with SPI-based touch input. It draws power from the Pi's GPIO pins, so no separate power supply is needed. The display uses HDMI ...

SKU: TB-RT4648

This 5KΩ Spectrol trimpot is an industrial-quality sealed multi-turn trimmer potentiometer. With 25 turns of adjustment range, it provides precise resistance setting far beyond what a single-turn pot can achieve — ideal for calibration, offset trimming, and fine-tuning analogue circuits. Key Fea...

SKU: LB-LR0335-B

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant blue when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar to neon tubing — but remains cold to the touch and can be bent, shaped, and wra...

SKU: LB-LR0335-FG

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant fluorescent green when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar to neon tubing — but remains cold to the touch and can be bent, sh...

SKU: LB-LR0335-G

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant green when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar to neon tubing — but remains cold to the touch and can be bent, shaped, and wr...

SKU: LB-LR0335-LB

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant light blue when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar to neon tubing — but remains cold to the touch and can be bent, shaped, a...