All Products

SKU: AF-3489

This 30mm translucent red arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with a ~1K resistor are embedded in the button body in a series configuration, drawing just 5mA from a 5V supply. The button screws into place through material up to ~20mm thick, co...

SKU: AF-3488

This 30mm translucent yellow arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with a ~1K resistor are embedded in the button body in a series configuration, drawing just 5mA from a 5V supply. The button screws into place through material up to ~15mm thick,...

SKU: SF-COM-13416 · MPN: COM-13416

This 16mm momentary metal pushbutton gives custom panels, enclosures and interactive projects a clean, rugged interface with a polished stainless steel finish.The switch is SPDT momentary, so it changes circuit state only while it is being pressed. A white illuminated LED ring provides a clear vi...

SKU: AF-1505

A clean, rounded 16mm panel-mount momentary pushbutton in black. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. Key Features Momentary Action – Normally open; contacts connect only while pr...

SKU: AF-1503

A clean, rounded 16mm panel-mount momentary pushbutton in burgundy. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. Key Features Momentary Action – Normally open; contacts connect only while...

SKU: AF-1502

A clean, rounded 16mm panel-mount momentary pushbutton in yellow. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. Key Features Momentary Action – Normally open; contacts connect only while p...

SKU: AF-1504

A clean, rounded 16mm panel-mount momentary pushbutton in green. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. Key Features Momentary Action – Normally open; contacts connect only while pr...

SKU: AF-1445

A clean, rounded 16mm panel-mount momentary pushbutton in red. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. Key Features Momentary Action – Normally open; contacts connect only while pres...

SKU: AF-4352

Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons each have individually addressable NeoPixels underneath, and the seesaw I2C chip ha...

SKU: SF-COM-11273

This large 100 mm yellow dome pushbutton is hard to miss and satisfying to press. It features a built-in LED indicator, a pre-installed long-life microswitch, and a polycarbonate lens cap for optical clarity. The height can be adjusted to a low-profile configuration by removing the middle ring. ...

SKU: LB-LS1025

The 2-Player DIY Arcade Joystick Kit includes everything you need to build your own retro arcade controls. With 20 LED arcade buttons, two joysticks (red and blue), two USB encoders, and all necessary cabling, this kit is ready to connect to a Raspberry Pi, PC, or Mac. The USB encoders present a...

SKU: AF-4372

This laser-cut acrylic enclosure kit turns your 8×8 NeoTrellis setup (four 4×4 NeoTrellis boards) into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside four NeoTrellis RGB Dr...

SKU: AF-4979

The NeoKey FeatherWing adds two mechanical key switch sockets with individually addressable NeoPixel backlighting to any Feather-format microcontroller. Each socket accepts Cherry MX or compatible switches (Kailh, Gateron, etc.) without soldering, using Kailh hot-swap sockets. A reverse-mount Ne...

SKU: DF-TEM2022C-EN-1

The Hackster and DFRobot EEDU Environmental Sensor Kit provides everything you need to get started with IoT environmental monitoring using an ESP32-based FireBeetle board. Build practical projects that monitor soil moisture, air quality, and environmental conditions in real time. The kit centres...

SKU: AF-5296

The Adafruit LED Arcade Button 1×4 QT I2C Breakout lets you connect up to four illuminated arcade buttons to any microcontroller over I2C. A built-in seesaw microcontroller handles button press detection and LED PWM control, so you don't need to dedicate GPIO pins or set up PWM outputs — just plu...

SKU: AF-4190

We've got plenty of round and square buttons, but these LED Illuminated Triangle Pushbuttons are welcome to the party. These make us think of 1960's or 70's Sci-Fi control board buttons. As everyone knows, triangular buttons are the most retro-futuristic of all button shapes. Get 6 of the...

SKU: AF-4189

We've got plenty of round and square buttons, but these LED Illuminated Triangle Pushbuttons are welcome to the party. These make us think of 1960's or 70's Sci-Fi control board buttons. As everyone knows, triangular buttons are the most retro-futuristic of all button shapes. Get 6 of them tog...

SKU: AF-4186

A retro-futuristic triangle-shaped illuminated pushbutton that looks straight out of a 1960s sci-fi control panel. Medium-sized and easy to press, this red button features a built-in LED that can be controlled independently from the switch — use it as an indicator, a status light, or just for vis...

SKU: AF-4187

A triangle-shaped momentary pushbutton with a built-in LED, giving your control panels a distinctive retro sci-fi aesthetic. The LED and switch contacts are electrically independent, so you can control illumination separately — light it when pressed, when not pressed, always on, or always off. T...

SKU: AF-3430

A 24 mm translucent red arcade button with built-in LEDs. The crystal-clear body glows when the LEDs are powered, making it ideal for illuminated control panels, arcade cabinets, and interactive projects. A pre-installed micro-switch with gold-plated contacts provides a smooth, tactile press. Th...