All Products

SKU: DF-TEL0117

LoRa MESH Radio Module is a high performance, low power, long-range micro-power RF module, using a distributed ad-hoc network communication mode, embedded wireless MESH MANET protocols, users do not need to do anything modified to present devices, protocols, nor need for secondary development...

SKU: DF-TEL0114

LoRa MESH Radio Module is a high performance, low power, long-range micro-power RF module, using a distributed ad-hoc network communication mode, embedded wireless MESH MANET protocols, users do not need to do anything modified to present devices, protocols, nor need for secondary development...

SKU: SF-GPS-30515 · MPN: GPS-30515

The FP platform is a high-precision GNSS receiver system built around SparkFun’s modular Flex System, designed to be repairable, user-upgradeable and ready for long service life.This FPL version comes fully assembled with the Quectel LG290P module installed, delivering modern multi-frequency RTK ...

SKU: DF-KIT0210 · MPN: KIT0210

This compact outdoor solar power kit is made for off-grid monitoring and IoT installations where mains power is not available. It pairs a 10W monocrystalline solar panel with a solar power controller to charge lithium batteries and provide regulated 12V and 5V outputs for devices such as Raspberr...

SKU: DF-TEL0115

LoRa Radio Module is a type of long range low data rate data radio modem based on Sx1276 from Semtech. It is a low-cost sub-1 GHz transceiver module designed for operations in the unlicensed ISM (Industrial Scientific Medical) and LPRD bands. Frequency spectrum modulation/demodulation, multi-...

SKU: TB-XC4394

Getting Internet of Things (IoT) devices connected has never been easier. This LoRa/Wi-Fi gateway provides connectivity with 3G/4G access (USB 3G/4G dongle required), or via the WAN port for your existing network. LoRa is the latest technology being used by Arduino devices for powerful connectivi...

SKU: LB-SOLAR

A compact micro solar cell rated at 1.5 V and 400 mA (0.65 W peak), ready to use with pre-soldered anode and cathode wires. Its small 80×60 mm form factor makes it well suited for DIY solar projects, battery charging experiments, and powering small loads like motors, LEDs, and light bulbs. Key F...

SKU: EC-ACS95915S

The Elecrow Lora Shield is a long range transceiver on a Arduino shield form factor and based on Open source library.The Lora Shield allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference i...

SKU: EC-DIS01835A-3

The CrowPanel Advance 3.5" is a Meshtastic-ready HMI touchscreen display powered by an ESP32-S3 with an onboard SX1262 LoRa module. It features a 480 × 320 IPS capacitive touch panel, integrated AI voice interaction via microphone and speaker, and a replaceable wireless module design for flexible...

SKU: SF-WRL-17841

A compact wide-band internal antenna covering 700–2700 MHz, suitable for 4G LTE, LoRa, BLE, and other RF applications. The FPC radiator element connects via a 100mm coaxial cable with an IPEX (u.FL equivalent) connector, and 3M adhesive backing makes it easy to mount inside enclosures and project...

SKU: SF-DEV-21326 · MPN: DEV-21326

This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...

SKU: LB-SOLAR-M

A compact micro solar panel rated at 1.5 V and 400 mA (0.65 W peak), fitted with pre-soldered male jumper wires for direct breadboard use. Its small 80×60 mm form factor makes it easy to integrate into DIY solar projects and prototyping setups. Key Features 1.5 V / 400 mA Output – 0.65 W peak ...

SKU: SF-WRL-15597

A high-gain outdoor fiberglass antenna designed for maximum range on LoRa projects. With 5.8 dBi gain in the 860–930 MHz band, this antenna is ideal for heavy-duty LoRa base stations and long-range node deployments. Built from fiberglass and aluminium for weather resistance, it includes pole-mou...

SKU: DF-TEL0122

DFRobot FireBeetle series are low power consumption controllers designed for Internet of Things (IoT) development. The FireBeetle series are aiming straight at the point fast and convenient low-power IoT building. There are three categories of FireBeetle series, containing Boards (main...

SKU: DF-TEL0121

DFRobot FireBeetle series are low power consumption controllers designed for Internet of Things (IoT) development. The FireBeetle series are aiming straight at the point fast and convenient low-power IoT building. There are three categories of FireBeetle series, containing Boards (main...

SKU: WS-21667

SX1262 LoRa Node Module For Pico LoRaWAN Protocol Support Features At A Glance The Pico-LoRa-SX1262-XXXM is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262 with better performance than the SX127X series. The LoRa modulation technology solves the balancing prob...

SKU: EC-CIL13002M2

Elecrow ThinkNode-M2 is a high-performance LoRa signal transceiver. It uses the ESP32-S3 module as the main processor and supports Bluetooth. Users can easily configure and monitor the device through their mobile phones. M2 is pre-installed with Meshtastic firmware and equipped with an SX1262 wi...

SKU: SF-GPS-30581 · MPN: GPS-30581

The FPM-T is a high-precision GNSS receiver in SparkFun’s SparkPNT FP family, built around the modular Flex System. This model is supplied fully assembled with the Septentrio mosaic-X5 module installed, ready for demanding positioning work.An integrated IMU provides tilt compensation, while the r...

SKU: WS-20682

The Pico-LoRa-SX1262-868M is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262, which supports LoRaWAN protocol and EU868 band. It is allowed to connect the TTN, TTS servers through a LoRa gateway to use LoRa Cloud service fast and easily. Standard Raspberry Pi Pico heade...

SKU: AF-4074

Add long-range LoRa radio to your Raspberry Pi with the Adafruit LoRa Radio Bonnet. This plug-in board pairs an SX1276-based RFM95W LoRa transceiver with a 128×32 OLED display and three user buttons, giving you a complete radio node with a built-in interface for status messages and user interacti...