All Products

SKU: SF-ROB-12859

The Big Easy Driver is a stepper motor driver board for bipolar stepper motors up to 2 A per phase, based on the Allegro A4988 driver chip. Designed by Brian Schmalz, it's the successor to the popular Easy Driver board. It defaults to 16-step microstepping mode and includes onboard 5 V and 3.3 V...

SKU: AF-1438

The Adafruit Motor/Stepper/Servo Shield v2.3 is the upgraded successor to the original Motor Shield, delivering higher current, lower voltage drop, and a fully I2C-based design that frees up your Arduino's PWM pins. Drive up to 4 DC motors or 2 stepper motors plus 2 hobby servos from a single sta...

SKU: SF-ROB-10507

The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driver has an output drive capacity of 35V and 1Amps. The board is capable of driving motors in full, half, quarter, eight, and sixteenth-step modes. The lo...

SKU: DF-FIT0503

INTRODUCTION This is a miniature stepper motor with 100:1 metal reduction gear box for enhanced torque. It has a voltage input range of 5 - 12V DC. This product is suitable for the 3D printers and applications which require precise rotation control. Note: Please limit the motor current, or o...

SKU: DF-FIT0473

This metal DC geared motor features a 45:1 metal gear reducer in a compact form factor, delivering up to 4.5 kg·cm of stall torque at 133 RPM. The all-metal gearbox provides durability and reliability for robotics, drive systems, and mechanical projects. The motor operates on 2–7.5 V (rated 6 V)...

SKU: AF-858

This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. There are only 32 step (11.25 degree) per revolution, and inside is a 1/16 reduction gear set. (Actually its 1/16.032 but for m...

SKU: LB-LR0228

These are the popular 28YBJ-48 geared stepper motors with driver board. The motor and driver are suitable for 5V operation. 4 Phase Current : 160 mA per winding (320 mA in 4-step mode) Measured: 250mA stopped, 200 mA running fast Resistance : 31 Ω per coil winding (from Red wire to any coil) ...

SKU: AF-807

Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers in our Adafruit Motorshield". If you accidentally damaged the drivers in a shield, you can use one of these puppies to replace it....

SKU: DF-DRI0023

INTRODUCTION Do you want to do some projects with stepper motors such as a drafting instrument, a 3D printer, an auto curtain......? As we all know, regular stepper motors are hard to drive, but with this stepper motor shield, you can easily drive 2 stepper motors vi...

SKU: DF-FIT0185

This 12 V DC geared motor (model GB37Y3530-12V-83R) pairs a powerful brushed motor with a 131:1 metal gearbox and an integrated Hall-effect quadrature encoder. The encoder provides 16 counts per revolution on the motor shaft — equivalent to 2096 counts per revolution on the gearbox output — givin...

SKU: KI-5698

A compact motor driver board for the BBC micro:bit that drives two DC motors or one stepper motor. The integrated edge connector lets the micro:bit slot in directly, with built-in protection against short circuits, overcurrent, and overheating. Power is supplied via terminal block or servo conne...

SKU: DF-FIT0495-E

This compact metal DC geared motor features a 99:1 metal gear reduction for high torque output in a small form factor. With a maximum torque of 2.5kg·cm, it's built for robotics, automation, and mechanical projects requiring reliable, durable performance. Specifications Rated Voltage: 6V Oper...

SKU: DF-FIT0495-G

A compact metal DC geared motor with a 45:1 reduction gearbox, delivering up to 1.2 kg·cm of torque. The all-metal gears provide durability and stability for robotics and mechanical projects. Features a D-shaped 4 mm output shaft. Specifications Rated Voltage – 6V DC Operating Voltage – 2–7.5...

SKU: LB-LR0180

Including CNC Shield V3.0The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers.It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors. Each channel of stepper motor only needs 2 I...

SKU: PL-2128

The Black Edition of the A4988 stepper motor driver carrier features a four-layer PCB for better thermal performance, allowing the A4988 to deliver approximately 20% more current than the standard two-layer (green) version. It is a drop-in replacement for the original carrier in most applications...

SKU: PL-3070

A 1000:1 micro metal gearmotor from Pololu's popular N20-size range, featuring a high-power 6V brushed DC motor with long-life carbon brushes (HPCB). The carbon brushes offer significantly longer motor life compared to the precious metal brush (HP) version, while delivering the same performance. ...

SKU: DF-FIT0521

This is a metal geared DC motor w/Encoder. It is a 6V motor with a 34:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds to 341.2 counts per revolution of the gearbox’s output shaft.  Pinmap ...

SKU: DF-FIT0791

A pack of four coreless micro motors measuring 6 × 12 mm, reaching 50,000 RPM at 3.7V. The slightly longer body compared to the 6 × 10 mm variant provides additional torque, making these motors a good balance of power and size for DIY micro drones and small RC projects. Key Features 50,000 RPM...

SKU: SF-ROB-10848

These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along the shaft at a specific rate of 1cm per 5 full rotations. These are a good choice for linear motion where precision and repeatability are important. Note: It looks like the ...

SKU: AF-1297

You have a stepper motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have a stepper motor mount just like this fine one here! This mount will fit any NEMA-17 motor (with 31mm hole spacing) with four screws. There are two 30mm long slots, 30mm apart so you can...