All Products

SKU: DF-FIT0731

NOTE: This product compatible with Raspberry Pi 3 Model B+, Raspberry Pi 4 Model B, and Jetson Nano.              Not compatible with Raspberry Pi 400, Raspberry Pi Pico and Raspberry Pi Compute Module 4.This is a 2-DOF pan-tilt hat based on Raspberry Pi 40PIN ...

SKU: LB-4B-4GB-GPIO

Raspberry Pi 4 Model B with GPIO card The Raspberry Pi 4 Model B is the latest version of the popular credit card sized computer. Just add a keyboard, mouse, HDMI display, power supply, micro SD card with installed Linux Distribution and you'll have a fully fledged computer that can run appl...

SKU: AF-3527 · MPN: 3527

The Adafruit PiOLED is a compact 128×32 monochrome OLED display that plugs directly onto your Raspberry Pi's GPIO header. At just 1 inch diagonal, it's the perfect status display for headless Pi projects — showing IP addresses, system stats, sensor readings, or custom graphics without needing a f...

SKU: AF-2738 · MPN: 2738

Control the same hardware as used in space...build your very own Astro Pi with the new Raspberry Pi Sense HAT! The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins to create an ‘Astro Pi’. The Sense HAT has several integrated circuit based sensors can be used ...

SKU: AF-4506 · MPN: 4506

The Adafruit 1.3" Colour TFT Bonnet for Raspberry Pi combines a 240×240 IPS TFT display with a 5-way joystick and two pushbuttons on a single plug-and-play bonnet. The display is driven by the ST7789 controller over SPI, delivering vibrant 16-bit colour with wide viewing angles. A Qwiic/STEMMA Q...

SKU: AF-2082 · MPN: 2082

The Timber Pibow is a layered wood enclosure from Pimoroni for the Raspberry Pi 1 Model B+. Crafted from high-quality wood with transparent acrylic top and base layers, it provides a natural, elegant look while protecting the board. An extension layer is included for stacking HATs or other access...

SKU: RP-SC0229-1 · MPN: 4301

The official Raspberry Pi Foundation case for the Raspberry Pi 4 Model B. This solid ABS enclosure in the classic red and white colour scheme keeps your Pi secure while providing labelled cut-outs for all connectors: micro HDMI, USB-C power, Ethernet, USB ports, and the GPIO header. The snap-fit...

SKU: AF-4823 · MPN: 4823

A 150mm (6″) GPIO extension cable for Raspberry Pi models with a 2×20 pin header. Extends all 40 GPIO pins between your Pi and a HAT, Bonnet, pHAT, or other accessory, allowing you to mount add-ons away from the board. Plug the socket end onto the Raspberry Pi's GPIO header (white mark aligned w...

SKU: AF-5026 · MPN: 5026

This mounting plate kit is an affordable, simple solution to mounting your Raspberry Pi 4 or Model 3 B+ to your Raspberry Pi HQ Camera.  Easy to assemble, the plate attaches to your HQ Camera on one side, and your Raspberry Pi mounts to the other side – spacers and fixings are incl...

SKU: AF-2244 · MPN: 2244

A snap-on replacement lid in smoke grey for the Raspberry Pi Model B+/Pi 2/Pi 3 polycarbonate case. Mix and match with different coloured bases to customise your Pi's look. The super-glossy polycarbonate is durable enough for bags and toolboxes. The lid fits snugly onto the case base with slim o...

SKU: AF-2248 · MPN: 2248

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite combinations.  Buy one base then match different colored lids to your ...

SKU: AF-2257 · MPN: 2257

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite combinations.  Buy one base then match different colored lids t...

SKU: AF-1979 · MPN: 1979

This extra-tall, extra-long 2x20 female stacking header lets you add multiple plates, breakouts and other boards to a Raspberry Pi with a 40-pin GPIO header.The female header section is made taller to help an attached PCB clear the Raspberry Pi Ethernet and USB jacks. The stacking pins are also e...

SKU: AF-3531 · MPN: 3531

The Adafruit 128×64 OLED Bonnet is a compact display add-on for Raspberry Pi, featuring a 1.3" diagonal monochrome OLED screen with a 5-way joystick and two pushbuttons. The high-contrast white OLED pixels are individually lit with no backlight required, delivering crisp, readable text and graphi...

SKU: AF-3062 · MPN: 3062

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.8" PiTFT and Adafruit Pi B+ / Pi 2 / Pi 3 case base! This Clear Case Base and Faceplate and Buttons Combo Pack is a simple way to enclose your 2.8" PiTFT and Pi safely and in style...

SKU: AF-2262 · MPN: 2262

The Adafruit GPIO Reference Card makes it easy to identify and connect wires to the Raspberry Pi's GPIO header. This ultra-thin (0.8 mm) card slides directly onto the 2×13 GPIO header, labelling each pin by function — including I²C, UART, SPI, power, and general I/O — so you can wire up your proj...

SKU: AF-2256 · MPN: 2256

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Ever - we decided to make it even better by adding COLORS!!!!! Mix and match snap-on lids and bases to form your favorite combinations.  Buy one base then match different colored lids to yo...

SKU: AF-2334 · MPN: 2334

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 Case Ever - we decided to make it even better by adding COLORS!!!!! Mix and match snap-on lids and bases to form your favorite combinations.  Buy one base then match different colored lids to your room...

SKU: PL-2749

A 2×20-pin stackable female header designed for the Raspberry Pi GPIO. The extended pins allow HATs and add-on boards to be stacked while still providing access to all 40 GPIO pins for additional connections. This version includes three removable 0.1" spacers, giving it extra height to clear the...

SKU: AF-2711 · MPN: 2711

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all GPIO’s on a Raspberry Pi Mini proto area for...