All Products
Showing 21-29 of 29 products · 31 unavailable products hidden
Adafruit 2.9 Grayscale eInk / ePaper Display FeatherWing - 4 Level Grayscale
24-pin eInk / ePaper Extension Cable 0.5mm Pitch - 25cm Long
Adafruit CYBERDECK Bonnet for Raspberry Pi 400
DS3231 High Precision RTC Clock Module for Raspberry Pi B+
Gravity: CO Sensor (Calibrated) - I2C & UART
Raspberry Pi Motor Driving Expansion Board (Compatible with Raspberry Pi 4B / 3B+ / 3B / Zero)
MPN: DRI0054
GPIO Hammer Header (Solderless) - Female
Capacitive Liquid Level Sensor for Arduino
MicroMod STM32F405 Processor Board
MPN: DEV-21326
Adafruit 2.9 Grayscale eInk / ePaper Display FeatherWing - 4 Level Grayscale
Add a versatile grayscale eInk display to your Feather project with this 2.9" FeatherWing. The 296×128 pixel panel supports four levels of grey — white, light grey, dark grey, and black — giving you more visual depth than a standard monochrome display while refreshing in about one second, far fas...
24-pin eInk / ePaper Extension Cable 0.5mm Pitch - 25cm Long
A 24-pin 0.5mm pitch FPC extension cable, 25cm long, designed for mounting eInk and ePaper displays at a distance from the driver board. Use this cable when you need to position your display remotely — for example, in a case, frame, or enclosure separate from the main electronics. Simply pry ope...
Adafruit CYBERDECK Bonnet for Raspberry Pi 400
The Adafruit CYBERDECK Bonnet is a GPIO extender for the Raspberry Pi 400 that lets you plug any Pi bonnet, mini-HAT, or pHAT into the back of the Pi 400 at an angled position. It duplicates every GPIO pin from input to output, so your add-on boards work without any pin limitations. In addition ...
DS3231 High Precision RTC Clock Module for Raspberry Pi B+
A high-precision real-time clock (RTC) module based on the DS3231 IC, designed to plug directly into a Raspberry Pi B+ (and compatible with Arduino). The DS3231 maintains accurate timekeeping with ±5 ppm accuracy (±0.432 seconds per day) across −40 °C to +85 °C, and includes a coin cell battery b...
Gravity: CO Sensor (Calibrated) - I2C & UART
This is a sensor that detects carbon monoxide and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of carbon monoxide in the environment. Can be widely applied to fields like portable devic...
Raspberry Pi Motor Driving Expansion Board (Compatible with Raspberry Pi 4B / 3B+ / 3B / Zero)
· MPN: DRI0054
##Introduction The multifunctional motor driver expansion board is designed for Raspberry Pi Zero/Zero W/A+/B+/2B/3B/3B+/4B. This fully-featured robot motor expansion board is capable of supporting multiple motors, stepper motors, and servos simultaneously. It also provides spare camera and DIP d...
GPIO Hammer Header (Solderless) - Female
Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just t...
Capacitive Liquid Level Sensor for Arduino
Different from our previous liquid level sensors, this capacitive liquid sensor can be used to detect high-viscosity and low-corrosive liquids, such as glue, lubricating oil, grease, ink, engine oil, powder and other special materials. The sensitivity of the sensor can be adjusted by the knob (cl...
MicroMod STM32F405 Processor Board
· MPN: DEV-21326
This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...