All Products

SKU: SF-ROB-27478 · MPN: ROB-27478

A compact brushless gimbal motor with an integrated AS5048A magnetic encoder for high-resolution position feedback. The 11-pole-pair design delivers smooth, precise rotation at up to 467 RPM nominal speed, making it well suited for camera gimbals, robotics, and precision motion control. Specific...

SKU: AF-1449

A plastic-geared micro servo with an extra trick — a fourth wire brings out the internal potentiometer feedback signal, letting you read the servo's actual position via an analog input. This feedback capability enables motion recording, playback, and improved stability in robotics applications. ...

SKU: PR-PIM376

This 6 Degrees of Freedom Motion Sensor Breakout can detect acceleration in three axes - X, Y, and Z - as well as three axes of magnetic heading. It's ideal for building into robots, rockets, and rovers, or anywhere else where you want to measure motion accurately. It's compatib...

SKU: AF-4666

A compact passive infrared (PIR) motion sensor that detects movement from approximately 3–8 metres away. Much smaller than standard PIR modules, making it ideal for unobtrusive, space-constrained projects. Fully self-contained — just needs power, ground, and a resistor to set the delay time. Key...

SKU: SF-SEN-21242

RCWL-0516 is a technology that uses radar Doppler, microwave induction special module for detecting moving objects. The RCWL-0516 microwave radar sensor module can detect inert objects at the condition that it has enough density, volume and it is in motion. THis microwave radar sensor will sen...

SKU: YH-6000200548

DOFBOT-SE is a 6DOF robotic arm developed by Yahboom based on a virtual machine system. It does not require a embedded development board (Jetson NANO/Raspberry Pi), generates control decisions through a PC-side virtual machine, and is driven by an STM32 controller to implement various functions. ...

SKU: DF-SER0059

A miniature serial bus servo from DFRobot that delivers 2.3 kg·cm of stall torque at 6 V, controllable via TTL serial communication. Up to 253 servos can be daisy-chained in series, each assigned a unique ID for individual or synchronised control at baud rates up to 1 Mbps. The hybrid gear train...

SKU: DF-SEN0519

The DFRobot URM15 is an industrial-grade ultrasonic ranging sensor with an IP65-rated waterproof probe. It provides an effective measuring range of 30–500 cm (tested against a flat wall) and communicates via an RS485 interface using the standard Modbus RTU protocol, making it compatible with PLCs...

SKU: DF-DFR1179 · MPN: DFR1179

The ZL9NSQ is a high-performance 3D attitude sensor module that integrates a three-axis accelerometer, a three-axis gyroscope, and a three-axis magnetometer. Featuring a 32-bit ARM Cortex-M4F microprocessor, it utilizes the IMU Motion Engine algorithm along with a 2.4G wireless transceiver and pa...

SKU: DF-SEN0142

A compact breakout board for the MPU-6050, combining a 3-axis gyroscope and 3-axis accelerometer with an onboard Digital Motion Processor (DMP) on a single chip. The integrated DMP handles complex motion fusion algorithms, offloading processing from your microcontroller. The breakout includes a ...

SKU: LB-LS0869

The AM312 sensor is a mini IR pyroelectric infrared PIR motion human body sensor that is easy to install and has low power consumption. Its digital signal processing and high sensitivity make it ideal for use in automatic sensing circuits. Additionally, the repeatable trigger mode ensures that...

SKU: DF-SEN0018

This is a simple to use arduino motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the 'alarm' pin will go low. This sensor checks for infrared heat in it's detecting angle. Human body, pets and several ot...

SKU: SF-TOL-19753 · MPN: TOL-19753

BitRunner lets Carbide Motion control power to your CNC router, so you do not need to reach for the router switch at the end of each program or whenever a tool change is required.This V2 Standard version includes a lockout pendant, allowing you to manually disable the router during bit changes fo...

SKU: DF-DFR0407

The Arduino 9 Axes Motion Shield is based on the Bosch BNO055 absolute orientation sensor — a System in Package (SiP) integrating a triaxial 14-bit accelerometer, 16-bit gyroscope (±2000°/s range), triaxial geomagnetic sensor, and a 32-bit microcontroller running BSX3.0 FusionLib software. The B...

SKU: SF-SEN-13285

This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the ‘alarm’ pin will go low.This unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire past the 5V re...

SKU: PJ-PROP_SHIELD

The Prop Shield is meant for making interactive light and sound effects on small handheld props and wearable costumes. Motion Sensors - Allows motion interactive light & sound. Audio Amplifier - Clear quality audio output to a small speaker. Fast LED Driver - Drive APA102 / Dotstar LEDs fo...

SKU: PR-PIM373

The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for proximity sensing, presence detection, and collision avoidance on robots. This b...

SKU: DF-SEN0337

TOF Sense is a TOF-based (Time of Flight) laser ranging sensor that offers 1cm-5m detection range, 1mm resolution, ± 1.5cm error, and 10Hz data update frequency. The sensor supports 15 ° ~ 27 ° adjustable FOV, UART and CAN communication (selected by setting). Besides, it allows users to actively ...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: SF-COM-18732 · MPN: COM-18732

When your system needs a stable 12V rail from a variable DC supply, this industrial-grade buck-boost converter is built to deliver. It accepts a wide 8 to 36VDC input range and regulates it to 12V for loads up to 6A, or 72W.The buck-boost design automatically switches between stepping voltage dow...