All Products

SKU: SF-DEV-14011

This is a simple pack of five Green LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by L...

SKU: SF-DEV-14013

A pack of five red LilyPad LEDs on a snap-apart strip. Each LED has large sew tabs for stitching into fabric with conductive thread, making them ideal for wearable electronics and e-textile projects. The ultra-thin 0.8 mm PCB lies flat against fabric. Key Features 5× Red LEDs – Snap-apart stri...

SKU: SF-DEV-12049

The LilyPad Arduino USB is a sewable microcontroller board built around the ATmega32U4 with native USB support — just plug in a micro-USB cable to program, no external FTDI adapter needed. Officially supported in the Arduino IDE, it runs at 3.3V and features a JST connector for a rechargeable LiP...

SKU: SF-DEV-08777

Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the local ambient...

SKU: DF-DFR0199-R

This LilyPad LED Micro is Discontinued Now, We recommend other LilyPad as a suitable replacement. Here is a simple 5 pack of red LED micro for LilyPad. Need a smaller way to add some 'twinkle' to your LilyPad project? Then you need some LilyPad Micros! A LilyPad Micro is like a smal...

SKU: SF-DEV-14346

The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore circuits and programming, then break apart to make an interactive fabric or wearable project. Programming the ProtoSnap Plus is easy with the free Arduino software you’ll need to program the ATmega32...

SKU: LB-LR0183

A LilyPad-compatible microcontroller board based on the ATmega32U4, designed for e-textile and wearable electronics projects. The built-in USB communication allows the board to appear as a mouse, keyboard, or virtual serial port when connected to a computer — no separate USB-to-serial adapter nee...

SKU: SF-BOK-12019

If you’re interested in interactive toys, smart accessories, or light-up fashions, this book is for you! Sew Electric is a set of hands-on LilyPad Arduino tutorials that bring together craft, electronics, and programming. The book walks you through the process of designing and making a series of ...

SKU: DF-DFR0065

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings ...

SKU: DF-DFR0457

In most Arduino projects, relays are the first choice to drive some large current device. It requires a certain amount of current to drive the internal coil to pick-up contact. But for some MCU, like Intel Edison, Intel joule, lilypad, Raspberry Pi and other microcontroller with limited amoun...

SKU: SF-DEV-09717

The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The VCC pins of this FTDI cable are configured to operate at 5V with 3.3V I/O. The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The ...

SKU: SF-DEV-09718

The FTDI Cable is a USB-to-Serial (TTL level) converter that provides a simple way to connect TTL interface devices to USB. Built around the FTDI FT232RQ chip housed in the USB-A connector, this cable operates at 5V logic levels. The cable terminates in a 0.1" pitch, 6-pin connector commonly use...

SKU: SF-DEV-09873

The SparkFun FTDI Basic Breakout provides USB-to-serial conversion using the FTDI FT232RL IC, operating at 3.3V logic levels. Its 6-pin header matches the standard FTDI pinout, making it compatible with Arduino Pro, LilyPad, and other 3.3V boards that use the FTDI connector. The board brings out...

SKU: SF-TOL-10405

This sewing needle set is designed for e-textile projects, with eye sizes large enough to easily thread conductive thread. The set includes both large and small needles to suit different stitching needs — from thick fabric and felt to finer materials. Key Features E-Textile Ready – Eyes sized ...

SKU: SF-DEV-10899

The LilyTiny is a compact LilyPad board with a built-in ATtiny85 microcontroller that drives four pre-programmed LED patterns. Simply sew on four LEDs and connect a battery — no programming or main board required. Each of the four output pads produces a different lighting effect: heartbeat pulse...

SKU: AF-659

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tutorials and projects. Check out dozens of FLORA tutorials on the Adafruit Learnin...

SKU: SF-PRT-11214

MOSFETs are awesome. They’re like a switch that you flip electronically! This SparkFun MOSFET Power Controller makes it easy to switch a battery supply on and off using your favorite microcontroller. The board also has sewable pads so you can use it in e-textile projects that need more juice. Th...

SKU: SF-DEV-11364

The LilyTwinkle is a tiny little LilyPad board designed to add some twinkle to your project. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart! Simply sew on 4 LEDs and connect a battery and the LEDs ...

SKU: SF-DEV-13746

The SparkFun Beefy 3 is an FTDI Basic Breakout board based on the FT231X USB-to-serial IC. Unlike standard FTDI breakouts, it features an AP2112K voltage regulator capable of supplying up to 600mA at 3.3V — enough to power a 3.3V project directly from the board's USB connection. The 6-pin header...

SKU: DF-DFR0050

The DFRobot XBee USB Adapter connects XBee and Bluetooth modules to your PC via mini USB for configuration, wireless data transmission, and firmware programming. It uses an FTDI232 USB-to-UART converter chip for stable, reliable serial communication. The adapter also doubles as an FTDI programme...