All Products

SKU: PL-2508

This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly to the chassis’s battery terminals and motors, and the Arduino plugs into the shield, face down. This shield includes dual motor drivers, a buzzer for pl...

SKU: LB-LS1026

The CJMCU-MPU9150 is a 9-axis motion tracking breakout board based on the InvenSense MPU-9150 System in Package (SiP). It combines a 3-axis gyroscope, 3-axis accelerometer, and 3-axis digital compass (magnetometer) in a single module, providing complete orientation and motion sensing over I2C. T...

SKU: SF-SEN-29528 · MPN: SEN-29528

Add motion sensing to your project with this Qwiic-enabled LIS3DH breakout. The LIS3DH is a smart, low-power, three-axis capacitive micro-machined accelerometer with 12-bit resolution, suited to translation, motion, orientation and tap detection.This board is classified as a 3DoF, or 3 Degrees of...

SKU: LB-LS5114

The GY-87 is a 10 degrees-of-freedom (10DOF) sensor module that combines three chips on a single compact board: the MPU6050 (3-axis gyroscope + 3-axis accelerometer), HMC5883L (3-axis magnetometer), and BMP180 (barometric pressure sensor). All ten axes of data are accessible over a single I2C bus...

SKU: AF-4565

The Adafruit LSM6DSOX + LIS3MDL FeatherWing is a precision 9 Degree of Freedom (9-DoF) IMU add-on for any Feather board. It combines the LSM6DSOX accelerometer/gyroscope — known for its exceptionally low gyro drift and noise — with the LIS3MDL magnetometer for complete orientation and heading sen...

SKU: AF-4479

The Adafruit LIS3MDL is a triple-axis magnetometer (compass) breakout from ST, with selectable measurement ranges from ±4 gauss (±400 µT) up to ±16 gauss (±1600 µT). It's ideal for detecting magnetic north, measuring magnetic fields, or pairing with an accelerometer/gyroscope like the LSM6DSOX to...

SKU: SF-KIT-28011

Product Overview The Experiential Robotics Platform (XRP) is a hands-on, comprehensive robotics platform. It includes everything needed to build and program a robot to perform beginner through advanced tasks - building the foundation for innovative thinking, science, engineering, and problem-sol...

SKU: SF-SEN-21336

The SparkFun Micro 6DoF IMU Breakout features the STMicroelectronics LSM6DSV16X — a high-performance, low-power 6-axis IMU with a 3-axis accelerometer and 3-axis gyroscope. Its triple-core architecture processes data on three separate channels (UI, OIS, EIS) with dedicated configuration, processi...

SKU: SF-GPS-17722 · MPN: GPS-17722

Built around the u-blox ZED-F9P, this MicroMod carrier gives your project high-precision GNSS and RTK positioning in a swappable, solderless MicroMod format. It supports rover and base station operation, with RTK accuracy down to millimetre-level positioning when used with suitable correction dat...

SKU: AF-4554

The Adafruit TDK InvenSense ICM-20948 is a compact 9-DoF Inertial Measurement Unit that packs a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer into a single breakout board. It pairs InvenSense's MEMS accelerometer and gyro with the AK09916 magnetometer from Asahi Kasei Microdevic...

SKU: AF-5579

The Adafruit MMC5603 is a triple-axis magnetometer (compass) breakout with a wide ±30 gauss (±3000 µT) measurement range and full 20-bit output resolution at up to 1000 Hz. It's sensitive enough to detect Earth's magnetic field (which maxes at about 0.6 gauss), making it well-suited for compass a...

SKU: AF-4488

The Adafruit LIS2MDL is a triple-axis magnetometer (compass) breakout from ST, capable of sensing magnetic fields across a wide ±50 gauss (±5000 µT) range with no range configuration required. It's ideal for detecting magnetic north, measuring magnetic fields, or pairing with an accelerometer/gyr...

SKU: AF-1849

Get started with wearable electronics using the Adafruit Gemma Sensor Starter Pack. This all-in-one kit includes a GEMMA V2 board, sewable RGB NeoPixels, multiple sensors, a rechargeable battery with charger, and everything you need to build interactive sewable projects — no soldering required. ...

SKU: AF-4517

The Adafruit LSM6DSOX + LIS3MDL is a precision 9 Degree of Freedom (9-DoF) inertial measurement unit on a single breakout board. It combines the LSM6DSOX accelerometer/gyroscope — known for exceptionally low gyro drift and noise — with the LIS3MDL magnetometer for complete orientation and heading...

SKU: AF-4569

The Adafruit ISM330DHCX + LIS3MDL FeatherWing combines two precision ST sensors to deliver 9 degrees of freedom — accelerometer, gyroscope, and magnetometer — in the Feather form factor. Stack it onto any Feather board for industrial-quality motion sensing with AHRS orientation capability. The I...

SKU: AF-1246

Add light-reactive sensing to your wearable Flora project with this high precision Lux sensor. The TSL2561 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Compared to low cost CdS cells, this sensor is more precise, allowing for exact lux ...

SKU: AF-2472

The Adafruit BNO055 breakout delivers complete 9-DOF orientation sensing with onboard sensor fusion — no complex algorithms to write yourself. The Bosch BNO055 combines an accelerometer, gyroscope, and magnetometer on a single die with an ARM Cortex-M0 processor that handles all fusion calculatio...

SKU: AF-1018

A wide-range triple-axis accelerometer breakout featuring the Analog Devices ADXL326. With a ±16 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for detecting high-impact motion, vibration, and orientation in demanding applications. The onboard 3.3V regulator ac...

SKU: SF-GPS-15210

The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positional accuracy and faster satellite lock times. The board communicates over I2C ...

SKU: KS-KS4028

Launched by Keyestudio, this smart home kit is based on the open-source hardware of Micro:bit and designed for those who dream of living a more comfortable life with the help of technologies. This smart home system, with Micro:bit as its control board, is equipped with a 1602 LCD, a DHT11 temper...