All Products

SKU: DF-DFR0550

A 5-inch TFT capacitive touchscreen display with 800×480 resolution, designed for direct connection to Raspberry Pi 3B and 3B+ via the DSI interface. The display is powered directly from the Pi — no external power supply required. A potentiometer on the back allows hardware backlight adjustment. ...

SKU: EC-AMS320240TFT

The 2.8" TFT Touch Shield V4.3 is an Arduino-compatible display shield featuring a 240×320 colour LCD with a resistive touchscreen and onboard SD card socket. It communicates over SPI, keeping pin usage low and leaving more pins available for other components. Driven by the ILI9341 controller, t...

SKU: AF-1651

The 2.8" TFT Touch Shield with Resistive Touch Screen plugs directly into any Arduino UNO or Mega-shaped board, providing a bright, full-colour display with touch input and an onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI fo...

SKU: AF-1680

A 5.0-inch TFT display with 800×480 resolution and LED backlight, providing a large, vibrant screen for embedded projects. This version does not include a touchscreen overlay, making it a lower-cost option when touch input is not required. This is a raw RGB TTL (parallel pixel-clock) display — i...

SKU: AF-5795 · MPN: ADA5795

This square 4 inch TFT panel gives advanced display projects a high-resolution 720x720 pixel canvas with 16-bit full colour. It is an IPS display, so the colour remains strong up to 80 degrees off-axis in any direction.This version does not include a touchscreen. The panel uses an ST7701S TFT dri...

SKU: AF-2454

The Adafruit DPI TFT Kippah connects a 40-pin TTL TFT display directly to your Raspberry Pi's GPIO header, bypassing the need for an HDMI encoder/decoder. The result is a fast, native 18-bit colour display with full graphics acceleration and instant refresh — the same quality you'd expect from an...

SKU: AF-4374

The Adafruit BrainCraft HAT is a Raspberry Pi 4 add-on board designed for machine learning and AI projects at the edge. It combines a display, stereo microphones, audio output, camera connector, user controls, and sensor ports into a single HAT, providing everything needed to build audio and vide...

SKU: AF-3315

A 2.4" TFT touchscreen display shield for the Adafruit Feather ecosystem. Featuring a 320×240 pixel display with 16-bit colour, a resistive touchscreen, and a built-in microSD card slot, this FeatherWing adds a full interactive display to any Feather board via SPI. Comes fully assembled with dua...

SKU: DF-DFR0678

This 7" TFT touchscreen connects directly to the Raspberry Pi via the DSI display interface, delivering 800×480 resolution with capacitive 5-point touch input. The display is powered entirely from the Raspberry Pi — no external power supply required. Mounting holes on the back of the screen allo...

SKU: AF-5793

This is a screen for advanced hackers who like the look of a nice, round TFT screen with tons of pixels. This massive 4" diagonal-sized display has 720x720 16-bit full-color pixels and is an IPS display, so the color looks great up to 80 degrees off-axis in any direction. The TFT driver is ST7...

SKU: AF-4393

The Adafruit Mini PiTFT 1.14" is a compact 135×240 pixel IPS colour display that snaps directly onto any Raspberry Pi via the GPIO header. Its slim widescreen format is perfect for status bars, scrolling text, or compact dashboards on headless Pi projects. The display communicates over SPI for f...

SKU: AF-5828 · MPN: ADA5828

This rectangular TFT module is for projects that can drive a high-pixel-count RGB TTL display directly. It provides 320x820 pixels with RGB666 16-bit full-colour output on an IPS panel, so colours stay clear at wide viewing angles.It uses an ST7701S TFT driver. SPI is used only to configure the d...

SKU: AF-1932

A labelled breakout board for 40-pin dot-clock TFT displays with an integrated LED backlight driver. Breaks out all 40 FPC pins to breadboard-friendly through-hole pads and includes a FAN5333-based boost converter for driving backlight LED strings up to 24V. The backlight driver defaults to 25mA...

SKU: AF-5825 · MPN: ADA5825

This square TFT module is for advanced display projects that need a high-resolution, 3.4 inch IPS panel with a 480 x 480 pixel layout. It delivers 16-bit full-colour output and wide off-axis viewing, making it a neat fit for compact dashboards, controls and custom embedded interfaces.The display ...

SKU: AF-5805 · MPN: ADA5805

This long rectangular TFT module is made for advanced display projects that need a wide bar-style screen with lots of pixels. The 4.58-inch IPS panel has a 320x960 resolution with 16-bit full-colour pixels, giving it a crisp, bright look for custom dashboards, status bars, instruments and other u...

SKU: AF-4520

The Adafruit 1.3" 240×240 Wide Angle IPS TFT Display is a bare display module — the same screen used in the Adafruit CLUE and Mini PiTFT 1.3". It delivers 240×240 pixels of 16-bit full colour with 80° viewing angles in all directions, driven by the ST7789 controller. This is the display module o...

SKU: DF-DFR0669

A 3.5" IPS TFT LCD display module with 480×320 resolution and a 5-point capacitive touchscreen. Driven by the ILI9488 display controller and GT911 touch chip, it communicates over SPI and operates at 3.3–5.5 V, making it compatible with Arduino UNO, Leonardo, ESP32, ESP8266, and DFRobot FireBeetl...

SKU: AF-4687

The Adafruit 2.13" Monochrome E-Ink Bonnet brings crisp, paper-like displays to your Raspberry Pi with no soldering required. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying high-contrast black-and-white graphics that remain visible even with power discon...

SKU: AF-4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: AF-4863

The Adafruit CYBERDECK HAT is a GPIO extender for the Raspberry Pi 400 that lets you plug full-size HAT displays and add-on boards into the back of the Pi 400 at a convenient angle. It duplicates every GPIO pin from input to output, so your HATs work without any pin limitations. In addition to t...