All Products
Showing 21-40 of 53 products · 7 unavailable products hidden
Alphabet LED Filament - Warm White Letter "U"
·
A warm-white LED filament shaped as the letter "U", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...
IO Expansion HAT for Raspberry Pi 4B/3B+
An I/O expansion HAT for Raspberry Pi 4B and 3B+ that breaks out all GPIO pins into clearly labelled digital, analogue, PWM, I2C, UART, SPI, and I2S interfaces. The board is compatible with DFRobot Gravity series sensors and modules, allowing plug-and-play connections without complex wiring. The...
Alphabet LED Filament - Warm White Letter "Q"
·
A warm-white LED filament shaped as the letter "Q", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...
2 x AAA Open Battery Holder with JST PH Connector
·
A slim, open-top 2×AAA battery holder with a genuine JST PH connector. Two AAA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and boards with JST PH battery inputs. The JST PH connector polarity matches Adafruit's Li-Ion/LiPo...
Alphabet LED Filament - Warm White Letter "O"
·
A warm-white LED filament shaped as the letter "O", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...
Metal Case for Raspberry Pi 4B (Dual fans)
Metal Case for Raspberry Pi 4BMetal Case for Raspberry Pi 4B (Dual fans)Metal Case for Raspberry Pi 4B (Dual fans), DFRobotNOTE: two fans in case are not controlled by the program, they will turn on once the Raspberry Pi is powered.SPECIFICATION Dimension: 87 * 56 * 25 mm / 3.4*2.2*1.0 inch Weigh...
Alphabet LED Filament - Warm White Letter "Y"
·
A warm-white LED filament shaped as the letter "Y", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...
Alphabet LED Filament - Warm White Letter "P"
·
A warm-white LED filament shaped as the letter "P", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...
Alphabet LED Filament - Warm White Letter "X"
·
A warm-white LED filament shaped as the letter "X", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...
Optomax Digital Liquid Level Sensor
·
The Optomax is an optical liquid level sensor that detects the presence or absence of almost any liquid — oil or water based. Inside the polysulfone housing, an infrared LED and matching phototransistor work together: when dry, the IR light reflects internally back to the sensor; when the tip is ...
All-in-one Starter Kit for Pico 2 RP2350
The All-in-one Starter Kit for Pico 2 is a beginner-friendly learning platform built around the Raspberry Pi Pico 2 RP2350 chip. It integrates 17 sensor modules on a single circuit board with a 2.4-inch TFT full-colour touchscreen — no soldering or wiring required. Just plug in and start building...
Alphabet LED Filament - Warm White Letter "H"
·
A warm-white LED filament shaped as the letter "H", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...
IIC TO GPIO shield V2.0
The DFRobot IIC to GPIO Shield V2.0 (DFR0013) expands your Arduino's digital I/O capacity by converting a single I2C bus into 16 additional digital I/O ports. Using just two data lines (SCL and SDA), the shield frees up your existing pins for other tasks — essential for robotics, interactive medi...
5.5/2.1mm DC to Type-C Adapter
A DC 5.5×2.1mm female to USB Type-C male power adapter plug, allowing you to power USB-C devices from a DC barrel jack power supply. Useful for powering Raspberry Pi 4/5, LattePanda, and other USB-C-powered boards from existing DC supplies. Also available in a Micro-USB version. Specifications ...
Adafruit CYBERDECK Bonnet for Raspberry Pi 400
·
The Adafruit CYBERDECK Bonnet is a GPIO extender for the Raspberry Pi 400 that lets you plug any Pi bonnet, mini-HAT, or pHAT into the back of the Pi 400 at an angled position. It duplicates every GPIO pin from input to output, so your add-on boards work without any pin limitations. In addition ...
Alphabet LED Filament - Warm White Letter "D"
·
A warm-white LED filament shaped as the letter "D", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...
USB GPS Receiver (2m Extension Cable)
Based on a UBX-G7020-KT positioning chip, this USB GPS receiver is designed for low-power, high-sensitivity satellite positioning. It can receive 56-channel satellite signals and is built for faster positioning and stronger reception than traditional GPS receivers.The receiver includes a built-in...
Alphabet LED Filament - Warm White Letter "C"
·
A warm-white LED filament shaped as the letter "C", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...
Text-to-Speech Shield for Arduino
Give your Arduino project a voice with this text-to-speech shield. Built around the IFLYTEK XFS5051CE speech synthesis chip, it converts text strings into spoken audio in English and Chinese, with support for both male and female voices and 11 adjustable speaking speeds. The shield stacks direct...
Peristaltic Liquid Pump with Silicone Tubing - 5V to 6V DC Power
·
This peristaltic pump moves liquid by squeezing flexible silicone tubing with a rotating clover-pattern roller mechanism — the pump never directly contacts the fluid. This makes it well suited to food, beverage, gardening, and sterile applications where contamination must be avoided. The pump is...
