All Products

SKU: DF-DFR1080

Comparison Tables   | SKU | Model | Processor | Memory | Storage  |  Wireless | DFR1080 |  LattePanda Sigma  |  Intel Core i5-1340P  |  16GB  LPDDR5- 6400  |  /  |  / | DFR1081 |  LattePanda Sigma  (with 500GB SSD an...

SKU: WS-25506

Waveshare RP2040-PiZero Development Board, Based On The Raspberry Pi RP2040 Dual-core Processor, 264KB SRAM and 16MB onboard Flash memory, compatible with Raspberry Pi 40PIN GPIO header RP2040-PiZero Development Board  Based On Raspberry Pi RP2040   Onboard DVI interface, TF car...

SKU: SF-DEV-21326 · MPN: DEV-21326

This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...

SKU: SF-DEV-22659

BeaglePlay is an open-source single board computer built around the Texas Instruments AM6254 processor (quad-core ARM Cortex-A53) with 2GB DDR4 RAM and 16GB eMMC storage. It is designed to simplify connecting sensors, actuators, and human interfaces to a reliable embedded Linux system. The board...

SKU: SF-WRL-25134 · MPN: WRL-25134

Build connected sensor nodes, data loggers and battery-powered IoT projects around Raspberry Pi’s RP2350 microcontroller. This Thing Plus board adds wireless connectivity, extra memory and the familiar Feather-compatible footprint in a compact development platform.The RP2350 can run two selected ...

SKU: SF-DEV-14972

The Neutis Development Kit from Emlid is a quad-core system-on-module (SoM) development platform based on the Neutis N5 module. It runs a Yocto-based Linux BSP with an up-to-date kernel, powered by a 64-bit ARM Cortex-A53 CPU and ARM Mali450 MP2 GPU. The development board provides easy access to...

SKU: DF-DFR0600

PYNQ-Z2 is a FPGA development board based on ZYNQ  XC7Z020 FPGA, intensively designed to support PYNQ, a new open-sources framework that enables embedded programmers to explore the possibilities of xilinx ZYNQ SoCs without having to design programming logic circuits. Benefiting from progr...

SKU: WS-20290

The RP2040-Plus is a Pico-compatible development board based on the Raspberry Pi RP2040 microcontroller, upgraded with 4 MB onboard flash, a USB-C connector, and a lithium battery charge/discharge header for portable applications. Like the Raspberry Pi Pico, it features a dual-core ARM Cortex-M0...

SKU: RP-RP2040

The RP2040 is Raspberry Pi's first microcontroller chip, featuring dual ARM Cortex-M0+ cores running at up to 133 MHz. Built on a 40 nm process in a compact 7 × 7 mm QFN-56 package, it delivers high performance at low cost for embedded applications. With 264 KB of on-chip SRAM across six indepen...

SKU: SF-WRL-22631 · MPN: WRL-22631

XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and pr...

SKU: SF-WRL-22628 · MPN: WRL-22628

XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and pr...

SKU: DF-DFR1179 · MPN: DFR1179

The ZL9NSQ is a high-performance 3D attitude sensor module that integrates a three-axis accelerometer, a three-axis gyroscope, and a three-axis magnetometer. Featuring a 32-bit ARM Cortex-M4F microprocessor, it utilizes the IMU Motion Engine algorithm along with a 2.4G wireless transceiver and pa...

SKU: DF-DFR1083 · MPN: DFR1083

##Introduction The Arduino Portenta C33 is a streamlined module that offers the high performance of the Arduino Portenta family at a lower price point, thanks to optimizations and streamlined features. Ideal to developing cost-effective, real-time applications, the Portenta C33 features the ARM® ...

SKU: LB-ZERO2-KIT

The Pi Zero 2 W Kit includes the essentials for getting started with the Pi Zero W, including: Raspberry Pi Zero 2 W Mini HDMI to regular HDMI adapter  Micro USB to regular USB adapter A Pi Zero W Camera Connector 32GB MicroSD (Pre-loaded with NOOBS) A Pi Zero Case with Camera Enclosure ...

SKU: DF-DFR0849

A dual-output USB fast-charging buck module with wide 6–32V input range and adjustable 3–12V output. It supports multiple fast-charging protocols including Qualcomm QC 3.0, Huawei FCP/SCP, and Samsung AFC, making it compatible with 99% of smartphones on the market. Both USB channels operate indep...

SKU: AF-2711

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all GPIO’s on a Raspberry Pi Mini proto area for...

SKU: AF-2209

The SEGGER J-Link BASE is an industry-standard JTAG/SWD debugger and programmer for ARM-based microcontrollers. It connects via USB and provides hardware debugging, flash programming, and real-time memory access across a wide range of ARM cores — from Cortex-M0 to Cortex-A9. The J-Link is toolch...

SKU: AF-1914

The Raspberry Pi Model B+ is an updated revision of the original Raspberry Pi Model B, featuring improved power supply design, more USB ports, expanded GPIO, and a more convenient microSD card slot — all in the same compact form factor. Powered by the same Broadcom SoC running at 700 MHz with 51...

SKU: SF-DEV-15139

The Raspberry Pi 3 Model A+ is a compact, cost-effective single-board computer featuring the same 64-bit quad-core Broadcom BCM2837B0 processor as the Raspberry Pi 3 B+, running at 1.4 GHz. It includes dual-band Wi-Fi (2.4 GHz and 5 GHz) and Bluetooth 4.2/BLE in a smaller form factor. Compared t...

SKU: LB-00191

The BBC micro:bit v2 is a pocket-sized programmable computer designed for creative digital projects and coding education. Powered by a 64MHz ARM Cortex-M4 processor with FPU, 512KB flash, and 128KB RAM, it packs an impressive array of sensors and outputs into a board half the size of a credit car...