All Products

SKU: DF-KIT0222 · MPN: KIT0222

This kit bundles the HUSKYLENS 2 edge AI vision sensor with the HUSKYLENS 2 WiFi Module and HUSKYLENS 2 Wide-angle Camera Module, giving robotics and maker projects on-device visual recognition plus wireless interaction. It is designed to help users build AI vision applications without setting up...

SKU: DF-EDU0208 · MPN: EDU0208

This hands-on STEM kit helps students build a smart drip irrigation model while learning about automated agriculture, water conservation and climate action. It combines environmental sensors with a micro:bit or UNIHIKER K10 microcontroller to monitor soil moisture and water level, then control a ...

SKU: DF-EDU0208-1 · MPN: EDU0208-1

This hands-on STEM kit helps students build a working smart watering system while learning about automated agriculture, water conservation and climate action. It combines BOSON environmental sensors and a water pump with the included UNIHIKER K10 AI Coding Board to monitor soil moisture and avail...

SKU: DF-FIT1022 · MPN: FIT1022

This compact USB camera module is built around the Sony IMX179 image sensor, giving embedded projects an 8MP imaging option with autofocus and a USB connection. It is designed for use with platforms such as Raspberry Pi, NVIDIA Jetson, LattePanda, RDK X5 and PCs.The module uses the USB Video Clas...

SKU: PL-3216

A high-power 12V brushed DC gearmotor in the Pololu 25D form factor (25mm diameter) with a 34.014:1 metal spur gearbox and an integrated 48 CPR quadrature encoder. The encoder provides 1632.67 counts per revolution of the gearbox output shaft, enabling precise speed and position control for robot...

SKU: DF-FIT0807

PiTray clip is a Din Rail mounter for Single Board Computers like Raspberry Pi. Assembled of a 304 Stainless Steel blended plate and nylon clip with spring, it provides a simple, quick, strong, and durable Din Rail installation solution suitable for industrial setup, home automation application a...

SKU: DF-FIT0441

INTRODUCTION   This is a motor revolution: a new DC brushless motor with built-in motor driver. It can be conncected to Arduino directly without external motor driver. Whatsmore, the motor comes with directional control, PWM speed control and speed feedback output, which make this motor t...

SKU: DF-DFR0646-R

An 8-digit red LED segment display module with Gravity I2C interface. This module can display numbers, basic characters, and supports 16 levels of brightness adjustment — ideal for clocks, counters, dashboards, and data readouts in Arduino and Raspberry Pi projects. The Gravity connector makes w...

SKU: AF-6196 · MPN: ADA6196

A warm-white LED filament shaped as the letter "F", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: LB-LS3938

This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...

SKU: AF-6215 · MPN: ADA6215

A warm-white LED filament shaped as the letter "X", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: PL-1120

A 200:1 plastic gearmotor with a 90-degree output shaft, offering a compact and affordable solution for small robot designs. The low-current brushed DC motor is well-suited for use with common motor drivers, and the recommended operating voltage range is 3–12V. The gearbox is fully enclosed and ...

SKU: DF-FIT0277

The DFRobot 12V Low Noise DC Motor (Model 28PA51G) is a quiet, high-torque geared motor with a built-in two-phase hall encoder. Designed for applications where noise is a concern, it produces approximately 57–68 dBA under no-load conditions — making it well suited for indoor robotics and equipmen...

SKU: SF-WRL-19032 · MPN: WRL-19032

This Holybro SiK Telemetry Radio kit is a compact, lightweight open-source radio link for sending serial data over more than 300m out of the box. It is designed as a simple cable replacement for telemetry, RTK correction data (RTCM), MAVLink traffic, or basic serial output such as Serial.print() ...

SKU: DF-FIT0842

An ultra-thin flexible LED strip in yellow, measuring just 2.5 mm wide and 1 mm thick. With 120 SMD 0805 LEDs per metre, this 1-metre strip runs on 12V DC and can be cut every 3 LEDs to fit your exact length requirements. The incredibly slim profile makes this strip ideal for lighting in tight s...

SKU: DF-KIT0216-EN · MPN: KIT0216-EN

Built around the UNIHIKER K10, this DFRobot learning kit is designed to help beginners and makers explore modern smart hardware, IoT and artificial intelligence projects in one structured package.The kit includes six distinctive modules such as a millimetre wave human presence sensor, clutch serv...

SKU: AF-1444

A 16mm illuminated pushbutton with a built-in yellow LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the l...

SKU: DF-FIT0834

This ultra-thin flexible LED strip from DFRobot packs 138 warm white SMD 0805 LEDs into a single metre, with an incredibly slim profile of just 2.5mm wide and 1mm thick. It's ideal for lighting tight spaces where standard LED strips won't fit. Operating at 3V, the strip is compatible with microc...

SKU: EC-RA000022RK

The GPIO extension kit used for extending the GPIO interface on Raspberry Pi B+, it helps you break out all those tasty power, GPIO, I2C and SPI pins from the 40 pin header of Raspberry Pi B+ onto a breadboard.There is also the GPIO board and GPIO Cable for the Model B.Corresponding Interface Pin...

SKU: LB-LS6460

A battery box with a built-in 130 DC motor and on/off switch — a simple, self-contained power and drive unit for beginner robotics, model vehicles, and STEM projects. Just add batteries and connect to your build. Specifications Motor – 130 DC motor Voltage – 3–6 V (depending on battery config...