All Products
Showing 1-20 of 56 products · 4 unavailable products hidden
Gravity: Joystick Module V2
The Gravity Joystick Module V2 provides two-axis analogue control (X and Y) plus a digital push-button switch. Connect the two analogue outputs and one digital output to your Arduino or other microcontroller for intuitive directional input — ideal for robot control, menu navigation, and game proj...
Gravity: Haptic Motor Driver for LRA Motors
·
This Gravity haptic driver module is built for Linear Resonant Actuators (LRAs), turning simple I2C commands into crisp tactile feedback for interactive projects. It is powered by the TM6605 driver chip and supports LRA resonant frequencies from 140Hz to 220Hz.The module includes 44 built-in vibr...
Gravity: 8-Digital LED Segment Display Module (Green)
An 8-digit green LED segment display module with I2C communication, part of the DFRobot Gravity sensor and module range. It provides a clear, bright numerical display with 16 levels of adjustable brightness, making it easy to show sensor readings, counters, clocks, and other numerical data in you...
Gravity: CH423 I2C 24 Digital IO Expansion Module
The Gravity CH423 I2C 24 Digital IO Expansion Module extends your microcontroller with 24 additional digital output/input pins over a standard I2C connection. Based on the CH423 chip, it provides 8 GPIOs with interrupt support and 16 dedicated GPOs. The built-in current drive circuit delivers up...
Building Block Expansion Board for micro:bit & UNIHIKER K10
·
This expansion board turns a micro:bit or UNIHIKER K10 into a cable-free robotics controller for mobile builds. It provides onboard power from a user-replaceable 18650 cell slot and breaks out motor, servo, Gravity IO and I2C connections for adding sensors, displays, AI cameras and actuators.The ...
Gravity: 0-10V 15-bit High-Precision Dual-Channel ADC Module
·
The Gravity 0–10V ADC Module is a high-precision dual-channel analogue-to-digital converter designed to interface industrial-grade 0–10V sensors with microcontrollers and Linux-based systems. Built on the Texas Instruments ADS1115, it delivers 15-bit resolution (0.375 mV per step) with ±2 mV accu...
Gravity: I2C Triple Axis Accelerometer - LIS2DH
DFRobot presents the ultra low-power Arduino triple axis accelerometer! This device is based around a MEMS LIS2DH chip solution and has high-performance ultra-low power mode. The module is fitted with a Gravity I2C interface for easy plug and play integration in to your projects. The build in...
Joystick:bit v2 for micro:bit
Joystick:bit V2 is a JoyStick based on micro:bit. It contains a 4-direction joystick and 4 undefined buttons as as classic JoyStick. At the same time, with the board buzzer and vibration motor, it also enhance game experience. Joystick:bit V2 can be remote control handle for micro:bit which on...
Gravity GP8600 1-Channel I2C/PWM 16-bit DAC Module
·
This GP8600 module is a high-precision digital-to-analogue converter for connecting logic-level microcontrollers to industrial-style analogue control inputs. It accepts I2C or PWM signals and converts them for applications such as 0-5V, 0-10V and 4-20mA control.It is designed for automation and c...
Gravity: 4-Digital LED Segment Display Module (Green)
The Gravity 4-Digital LED Segment Display Module features a bright green 7-segment display with four digits, perfect for showing numbers, time, sensor readings, and other data in your projects. It communicates over I2C for simple two-wire connectivity with Arduino, Raspberry Pi, and other microco...
Gravity: GNSS GPS BeiDou Positioning Module with RTC - I2C&UART
·
##Introduction The Gravity GNSS Positioning & Timing Module integrates satellite positioning functionality and a real-time clock (RTC). The module automatically obtains satellite time based on a preset calibration period and accurately calibrates the onboard RTC chip. This calibration effectively...
Gravity: Starter Kit for Arduino
The Gravity Starter Kit for Arduino is a plug-and-play electronics toolkit designed for beginners and makers getting started with the Arduino platform. It includes a DFRduino UNO R3 microcontroller (fully compatible with Arduino UNO) along with 12 popular sensors and components from DFRobot's Gra...
Gravity: Analog pH Sensor/Meter Kit V2
The Gravity Analog pH Sensor/Meter Kit V2 is designed to measure the pH of liquids, indicating acidity or alkalinity on a scale of 0–14. It's commonly used in aquaponics, aquaculture, hydroponics, and environmental water testing. The kit includes a laboratory-grade pH probe, a signal conversion b...
Gravity LED Button for Arduino/micro:bit - Yellow
·
This LED-illuminated button module is a simple digital switch with a transparent cap and a yellow light. It works like a basic button, but the internal LED turns on while the button is pressed, giving clear visual feedback for interactive projects.When pressed down, the module outputs High and th...
Maqueen Plus V2 18650 micro:bit Robot with HUSKYLENS
·
This educational robot kit combines the micro:Maqueen Plus V2 18650 battery version with a Gravity: HUSKYLENS AI machine vision sensor. It is designed as a STEAM learning platform for primary and secondary students, classroom lessons, after-school projects and robot competitions.The Maqueen Plus ...
Gravity: I2C 16x2 Arduino LCD with RGB Backlight Display
A 16×2 character LCD module with full RGB backlight, communicating over I2C for minimal wiring. With support for 16 million backlight colours, this display adds a vibrant, customisable readout to your Arduino or compatible microcontroller projects using just four wires: VCC, GND, SDA, and SCL. P...
Gravity: Digital Push Button (Blue)
The Gravity Digital Push Button (Blue) is a simple momentary push button module designed for the DFRobot Gravity interface. It features an onboard LED indicator, immersion gold PCB surface, and a coloured button cap. A "D" marking on the board identifies it as a digital sensor for quick wiring re...
Gravity: I/O Expansion Shield for Pyboard
The Gravity I/O Expansion Shield for Pyboard connects your Pyboard v1.1 to the DFRobot Gravity sensor and module ecosystem with colour-coded plug-and-play connectors. No soldering is required — simply plug Gravity-compatible sensors and modules into the clearly labelled ports. An onboard externa...
DFRobot GP8630N 16-bit I2C/PWM to ±10V & 4-20mA DAC Module
·
This Gravity DAC module converts I2C or PWM digital signals into stable analogue voltage or current outputs for control and automation projects. Built around the GP8630N chip, it supports output modes such as ±10V, 0-5V, 0-10V and 4-20mA, with 16-bit resolution available in I2C mode.The symmetric...
Gravity: I2C LCD1602 Arduino LCD Display Module (Green)
A 16×2 character LCD display module from DFRobot's Gravity series, connecting to your Arduino or microcontroller via a simple I²C interface — just two data wires instead of the many parallel connections a standard LCD1602 requires. Compatible with both 3.3V and 5V, with no contrast adjustment nee...
