All Products

SKU: AF-6260 · MPN: ADA6260

The Adafruit SHT45 Trinkey is a tiny USB A device that combines an ATSAMD21 microcontroller with Sensirion's highest-precision SHT45 temperature and humidity sensor, protected by a PTFE filter. Simply plug it into any USB A port on your computer and start reading environmental data — no wiring, s...

SKU: AF-5022

The Adafruit Proximity Trinkey is a tiny USB-A development board built around the APDS9960 multi-function sensor and an ATSAMD21 microcontroller. Plug it into any USB port and you instantly have proximity, colour, ambient light, and gesture sensing — plus two NeoPixel LEDs and two capacitive touc...

SKU: AF-5954 · MPN: ADA5954

The Adafruit TRRS Trinkey is a USB-A plug-in microcontroller designed specifically for assistive technology. It combines an ATSAMD21 processor with a switched TRRS 3.5mm audio jack, connecting all 6 jack pins (tip, ring 1, ring 2, sleeve, plus tip switch and ring 1 switch) to analog-capable GPIO ...

SKU: AF-5912 · MPN: ADA5912

The Adafruit SHT41 Trinkey is a tiny USB A device that combines an ATSAMD21 microcontroller with a Sensirion SHT41 temperature and humidity sensor. Simply plug it into any USB A port on your computer and start reading environmental data — no wiring, soldering, or driver installation required. Th...

SKU: AF-4870

The Adafruit Neo Trinkey is a tiny USB-A development board featuring an ATSAMD21 microcontroller and four RGB NeoPixel LEDs. Just plug it into any USB-A port on a computer or laptop and you've got a programmable, colourful key that can act as a status indicator, macro keypad, MIDI controller, or ...

SKU: AF-5953 · MPN: ADA5953

The Adafruit Pixel Trinkey is a tiny USB microcontroller board purpose-built for driving NeoPixel (WS2812, SK6812) and DotStar (APA102) addressable LEDs directly from your computer. It plugs into any USB-A port and provides screw terminal connections for solder-free wiring to your LED strips, rin...

SKU: AF-5021

The Adafruit Slider Trinkey is a tiny USB A board built around the ATSAMD21 microcontroller with a pre-soldered 35 mm slide potentiometer and two NeoPixel LEDs. Plug it into any USB A port on your computer and program it as a volume control, brightness adjuster, colour picker, or any custom slide...

SKU: AF-5020

The Adafruit NeoKey Trinkey is a USB-A development board that combines an ATSAMD21 microcontroller, a Cherry MX-compatible key switch footprint, and an RGB NeoPixel LED into one tiny plug-in package. Insert it into any USB-A port and you've got a single-key macro pad, password entry device, or cu...

SKU: AF-5056

The Adafruit Trinkey QT2040 is an RP2040-based microcontroller that plugs directly into any USB-A port on your computer or laptop. With a STEMMA QT / Qwiic connector on the end, it turns any I2C sensor or accessory into a plug-and-play USB device — no breadboard or soldering required. The board ...

SKU: AF-4964

The Adafruit Rotary Trinkey is a tiny USB A board built around the ATSAMD21 microcontroller with a footprint for a standard rotary encoder and a built-in NeoPixel LED. Plug it into any USB A port on your computer and program it as a volume knob, scroll wheel, zoom control, or any custom rotary in...

SKU: AF-5248

  Here is the perfect hardware kit to make a RP2040 QT Trinkey into any kind of USB-connected smart sensor with a QT-sensor-sandwich! You can assemble it with just a plain Phillips screwdriver. Takes less than a minute to bolt on your favorite STEMMA QT or Qwiic board on top. And best of ...

SKU: AF-6013 · MPN: ADA6013

Keep your Pixel Trinkey protected in use and during transport with this cute, minimal clear enclosure. It has been custom-designed and 3D printed to fit the Pixel Trinkey neatly.The case accommodates the reset button, 3-pin JST SH port, and the 4 terminal block outputs, so the important connectio...

SKU: AF-6015

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws or glue are required; simply snap the two pieces together over the Trinkey.It's...

SKU: AF-5998 · MPN: ADA5998

Here is a cute and minimal enclosure for your Pixel Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button, 3-pin JST SH port, and the 4 terminal block outputs. No screws or glue are required; simply snap the two pieces ...

SKU: AF-5981 · MPN: ADA5981

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws or glue are required, simply snap the two pieces together over the Trinkey.It's...

SKU: AF-3848

An isolated Power over Ethernet (PoE) module that extracts power from the Ethernet cable's centre taps and outputs a regulated 5 V at up to 1.8 A. The built-in isolation transformer ensures there is no direct electrical connection between the Ethernet side and the 5 V output — important for safet...

SKU: WS-27541

  PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe HATExtends 1x Gigabit Ethernet Port Equipped With RTL8153B High-Performance Gigabit ETH Chip, Sinking Design Of Network Port, Neat And Be...

SKU: AF-1501

The Adafruit Trinket 5V is a tiny microcontroller board built around the Atmel ATtiny85 processor. At just 27mm × 15mm, it's small enough to fit into virtually any project and affordable enough to dedicate to a single build. Program it via the Arduino IDE over the Micro-USB connector — no separat...

SKU: AF-5306

Kailh Big Switch Series comes to Adafruit! These switches are 4 times bigger on each side than a normal MX switch. That comes up to 64 times bigger in volume. Yet, these switches are fully functional. Use as a fidget toy, or solder into a NeoKey trinkey to make the largest Escape key known to hu...

SKU: SF-GPS-29469 · MPN: GPS-29469

This SparkPNT Flex board combines Quectel's LG290P quad-band RTK GNSS receiver with the Feyman (FMI) IM19 IMU, providing centimetre-level positioning with tilt compensation and anti-jamming performance for demanding navigation and surveying projects.It is part of the SparkPNT GNSS Flex system, de...