Waveshare
PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5
All Products
New Arrivals
Raspberry Pi
Brands and Manufacturers
Ethernet Cables
Raspberry Pi 5
Wireless & Connectivity
Connectivity
Raspberry Pi Hats
Waveshare
$42.80
|
In stock at supplier
PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug And Play, Raspberry Pi 5 PCI...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe HAT
Extends 1x Gigabit Ethernet Port
Extends 1x Gigabit Ethernet Port
Equipped With RTL8153B High-Performance Gigabit ETH Chip, Sinking Design Of Network Port, Neat And Beautiful
PCIe TO GigE & USB HUB HAT
PCIe To Gigabit Ethernet And USB 3.2 Gen1
Designed For Raspberry Pi 5, Driver-Free, Plug And Play
Connecting To PI5 Via 16PIN Cable
Based On 16PIN PCIe Interface Of Raspberry Pi 5
* for reference only, please refer to the Package Content for detailed part list
Designed For Raspberry Pi 5, Driver-Free, Plug And Play
Connecting To PI5 Via 16PIN Cable
Based On 16PIN PCIe Interface Of Raspberry Pi 5
* for reference only, please refer to the Package Content for detailed part list
More USB Capability For Raspberry Pi 5
Extends The PCIe Interface To 3x High Speed USB 3.2 Gen1 Ports For Connecting More Peripherals
Extends 1x Gigabit Ethernet Port
Equipped With RTL8153B High-Performance Gigabit ETH Chip, Sinking Design Of Network Port, Neat And Beautiful
Network Speed Measurement
Supports Raspberry Pi OS / Ubuntu / OpenWRT, Etc., Stable
And Reliable Network Speed
Onboard Power Monitoring Chip And EEPROM
Real-Time Monitoring Of Power Status, Supports USB Port Power Control Via Software
What's On Board
-
VL805
PCIe to USB 3.2 Gen1 HUB chip -
RTL8153B
USB to Gigabit ETH chip -
INA219
Power monitoring chip -
EEPROM
for saving HAT ID and product information -
16PIN PCIe interface
for connecting to the PCIe interface of Raspberry Pi 5
-
Raspberry Pi GPIO header
for connecting Raspberry Pi 5 -
Gigabit Ethernet port
up to 1000Mbps data rate, compatible with 100Mbps -
USB 3.2 Gen1 expanded ports
USB1~USB3 -
Power port
for external Type-C 5V DC power supply -
PWR LED
Power indicator
How To Install
* for reference only, the Raspberry Pi 5 and cooling fan are NOT included, please refer to the Package Content for detailed part list
Outline Dimensions
Resources & Services
Jargon buster
Plain-language definitions for the technical terms used above.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- EEPROM
- A type of non-volatile memory that keeps stored data even when power is turned off. In a sensor module, it can be used to store settings or calibration data so they do not need to be re-entered every time.
- GPIO
- General-purpose input/output pins are microcontroller pins you can set in software to read signals, switch devices on and off, or connect to peripherals. The number of GPIO pins matters because it limits how many buttons, LEDs, sensors, and other parts you can wire directly to the board.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.
- Type-C
- USB Type-C (USB-C) is a small, reversible USB connector used for charging, power, and data transfer on many modern devices. A Type-C port or plug indicates the cable and charger connection needed to power, charge, or communicate with a device.
Find this product in
Connectivity
Raspberry Pi
