All Products
AI Overview
For a STEMMA QT setup you’ll typically want a 4-pin JST-SH (1.0mm pitch) to JST-SH cable (Qwiic/STEMMA QT compatible). Pick a length that fits your build:
Standard STEMMA QT / Qwiic JST-SH to JST-SH cables
- STEMMA QT / Qwiic JST SH 4-Pin Cable (50mm) ($2.15)
- JST SH 4-Pin Cable - Qwiic Compatible - 100mm Long (100mm) ($2.15)
- STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long (200mm) ($2.80)
- STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long (300mm) ($2.85)
- STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm long (400mm) ($3.25)
To plug a STEMMA QT device into 0.1" headers/breadboard
- STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets - 150mm Long (JST-SH to female sockets, 150mm) ($2.25)
- JST SH 4-Pin to Premium Male Headers Cable - Qwiic Compatible - 150mm Long (JST-SH to male headers, 150mm) ($2.25)
- Adafruit Qwiic / Stemma QT Breakout Board (breaks out JST-SH to 0.1" pins) ($4.00)
Adapters (if you’re bridging ecosystems)
- 4-pin JST PH to JST SH Cable - STEMMA / Grove to QT / Qwiic - 200mm long (STEMMA/Grove JST-PH ↔ QT/Qwiic JST-SH, 200mm) ($2.15)
- Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long (Grove ↔ JST-SH, 100mm) ($4.15)
- Qwiic Cable - Grove Adapter (150mm) (Qwiic ↔ Grove, 150mm) ($4.95)
Showing 1-20 of 100 products
ANO Rotary Navigation Encoder to I2C STEMMA QT Adaptor
·
This breakout turns the ANO rotary encoder wheel into an easy-to-use I2C input device. The ANO wheel gives you a clicky, scroll-wheel-style interface with a rotary control plus five button switches, without needing to wire up all the individual pins yourself.An onboard microcontroller runs Adafru...
Adafruit ATECC608 Breakout Board - STEMMA QT / Qwiic
·
The Adafruit ATECC608 Breakout provides hardware-based cryptographic security for your microcontroller projects. This crypto-authentication chip from Microchip stores private keys securely — once locked, the keys cannot be read back, only used for challenge-response authentication. Even if someon...
Adafruit VCNL4040 Proximity and Lux Sensor - STEMMA QT
·
The Adafruit VCNL4040 is a two-in-one proximity and ambient light sensor from Vishay. It measures proximity from 0 to 200 mm (~7.5 inches) using an on-board IR LED, and ambient light from 0.0125 to 6,553 lux — all over a simple I2C interface. The breakout includes 3.3V and 5V level-shifting circ...
Adafruit Infineon Trust M Breakout Board - STEMMA QT / Qwiic
·
The Adafruit Infineon Trust M Breakout features the OPTIGA Trust M (SLS 32AIA) secure element — a hardware crypto authentication chip that stores private keys securely, performs cryptographic operations, and generates true random numbers. It communicates over I2C via STEMMA QT / Qwiic connectors ...
Adafruit DPS310 Precision Barometric Pressure / Altitude Sensor - STEMMA QT / Qwiic
·
The Adafruit DPS310 is a high-precision barometric pressure and altitude sensor from Infineon, mounted on a breakout board with STEMMA QT / Qwiic connectors for solderless I2C wiring. It delivers ±1 hPa absolute accuracy and up to ±0.002 hPa relative precision in high-precision mode — equivalent ...
Adafruit AHT20 - Temperature Humidity Sensor Breakout Board - STEMMA QT / Qwiic
·
The Adafruit AHT20 is an affordable I2C temperature and humidity sensor from the makers of the popular DHT22. It delivers reliable readings with standard I2C communication, making it easy to use with any Arduino, Raspberry Pi or other microcontroller. This STEMMA QT version features solderless c...
Adafruit BH1750 Light Sensor - STEMMA QT / Qwiic
·
The Adafruit BH1750 Light Sensor is a 16-bit ambient light sensor from Rohm that provides measurements directly in lux — the SI unit for illuminance. This makes it easy to compare readings against reference values or other sensors without manual calibration or conversion. Packaged on a STEMMA QT...
Adafruit Wii Nunchuck Breakout Adapter - Qwiic / STEMMA QT
·
Turn a Wii Nunchuck into a versatile I2C controller for your next project with the Adafruit Wii Nunchuck Breakout Adapter. It fits snugly into the Wii connector and handles level shifting and power regulation, so you can use the controller with any 3.3V or 5V microcontroller. The Wii Nunchuck co...
Adafruit LTR390 UV Light Sensor - STEMMA QT / Qwiic
·
The Adafruit LTR390 is a dual-purpose UV and ambient light sensor with true UVA sensing at a peak spectral response between 300 and 350 nm. Unlike UV index approximation sensors, the LTR390 has a genuine UV photodiode — giving you real ultraviolet light measurements over a simple I2C interface. ...
Adafruit AW9523 GPIO Expander and LED Driver Breakout - STEMMA QT / Qwiic
·
The Adafruit AW9523 GPIO Expander and LED Driver Breakout adds 16 I/O pins to any I2C-capable microcontroller or single-board computer. What sets this expander apart is its built-in 256-step linear constant-current LED dimming — connect LEDs directly without current-limiting resistors for smooth,...
Stacking M2.5 Hardware Kit for STEMMA QT and RP2040 Trinkey
·
Here is the perfect hardware kit to make a RP2040 QT Trinkey into any kind of USB-connected smart sensor with a QT-sensor-sandwich! You can assemble it with just a plain Phillips screwdriver. Takes less than a minute to bolt on your favorite STEMMA QT or Qwiic board on top. And best of ...
Adafruit NeoSlider I2C QT Slide Potentiometer with 4 NeoPixels
·
Add a smooth slide control to any I2C project with the Adafruit NeoSlider — a 75 mm linear slide potentiometer with four RGB NeoPixel underlights, all communicating over I2C via the onboard seesaw microcontroller. No analog pins needed on your main board. Thanks to the STEMMA QT / Qwiic connecto...
Adafruit I2C QT Rotary Encoder with NeoPixel - STEMMA QT / Qwiic
·
The Adafruit I2C QT Rotary Encoder Breakout takes the hassle out of working with rotary encoders. An onboard microcontroller running Adafruit's seesaw firmware handles all the pulse tracking, debouncing, and pin management — simply read the encoder value over I2C whenever you need it. Designed i...
Adafruit LPS25 Pressure Sensor - STEMMA QT / Qwiic
·
The Adafruit LPS25 Pressure Sensor Breakout features the ST LPS25HB — an absolute barometric pressure sensor that measures atmospheric pressure from 260 to 1260 hPa. Use it for weather monitoring, altitude estimation, or any project where accurate air pressure readings are needed. The LPS25 deli...
Adafruit DS3231 Precision RTC - STEMMA QT
·
The Adafruit DS3231 Precision RTC with STEMMA QT connectors is a highly accurate I2C real-time clock featuring an integrated temperature-compensated crystal oscillator (TCXO). Unlike standard RTCs that rely on an external 32 kHz crystal, the DS3231 houses the crystal internally alongside a temper...
Monochrome 0.91" 128x32 I2C OLED Display - STEMMA QT / Qwiic
·
This compact 0.91" monochrome OLED display packs 128×32 individually controllable white pixels into a tiny, highly readable package. With no backlight needed, OLEDs deliver exceptional contrast and low power consumption — perfect for status displays, sensor readouts, and compact interfaces. The ...
Adafruit LTR-303 Light Sensor - STEMMA QT / Qwiic
·
The Adafruit LTR-303 is a low-cost I2C digital light sensor that provides 16-bit measurements for both infrared and visible+IR spectrums. Subtract one from the other to get human-visible light readings. With configurable gain and integration time, it can measure from 0 to over 65,000 lux — suitab...
Adafruit ANO Rotary Navigation Encoder to I2C Stemma QT Adapter
This STEMMA QT adapter makes the ANO rotary navigation encoder easy to use over I2C — no GPIO-heavy wiring needed. An on-board microcontroller running Adafruit's seesaw firmware tracks all rotary pulses and button presses, saving incremental values for querying at any time over I2C. Just plug in ...
Adafruit Mini I2C Gamepad with seesaw - STEMMA QT / Qwiic
The Adafruit Mini I2C Gamepad is a compact controller breakout with a 2-axis thumb joystick and 6 momentary buttons (4 large, 2 small), all communicating over I2C via the seesaw co-processor. It doesn't use any of your GPIO or analogue pins — just connect via STEMMA QT / Qwiic and start reading i...
Adafruit PC Joystick to seesaw I2C Adapter - STEMMA QT / Qwiic
Bring your classic PC joystick back to life. This adapter board takes any legacy DE-15 game port joystick and converts its analogue X/Y axes and two buttons to I2C via an onboard ATtiny816 running the Adafruit seesaw firmware. No analogue inputs needed on your microcontroller — just plug in a STE...