All Products
Showing 1-20 of 72 products
ABS Filament 1.75mm, 1Kg Roll - Raw (no pigment)
Premium Male/Male Raw Jumper Wires - 40 x 6 (150mm)
Premium Female/Female Raw Custom Jumper Wires - 40 x 6 (150mm)
Premium Male/Female Raw Jumper Wires - 40 x 6
PVA Filament 1.75mm, 0.5Kg Roll - Raw (no pigment)
2.13inch E-Paper (G) raw display, 250x122, Red/Yellow/Black/White
960×680, 13.3inch E-Ink raw display, SPI interface, without PCB
HIPS Filament 1.75mm, 1Kg Roll - Raw (no pigment)
GNSS-RTK Positioning Kit with LoRa 868MHz (EU)
MPN: KIT0198-EU
GNSS-RTK Positioning Kit with LoRa (915MHz)
MPN: KIT0198-US
IMX179 8MP Autofocus USB Camera Module with Microphone
MPN: FIT1022
MicroMod GNSS RTK Carrier Board - ZED-F9P
MPN: GPS-17722
GPS-RTK Board - NEO-M8P-2 (Qwiic)
MPN: GPS-15005
TCS3430/TCS34303 Ambient Tri-Stimulus Colour Sensor
MPN: ADA6479
TSSP77038 38kHz IR Demodulator Breakout
MPN: ADA5940
TFP401 HDMI/DVI Decoder to 40-Pin TTL Breakout - With Touch
Red 7-segment clock display - 1.2 digit height
Pi-DAC+
Adafruit ENS160 MOX Gas Sensor - Sciosense CCS811 Upgrade
Red 7-segment clock display - 0.56 digit height
ABS Filament 1.75mm, 1Kg Roll - Raw (no pigment)
A 1 kg (2.2 lb) reel of 1.75 mm raw (unpigmented) ABS (acrylonitrile butadiene styrene) filament for 3D printing. This natural, uncoloured filament is ideal when you plan to paint or dye your finished prints. ABS is a strong, durable general-purpose material suitable for prototypes, functional pa...
Premium Male/Male Raw Jumper Wires - 40 x 6 (150mm)
Our Raw Male/Male Jumper Wires are perfect for making a custom jumper wire sets for wire harnesses or jumpering between headers on PCB's. These premium jumpers are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of the ten colors). The 0.1" raw sockets on either end...
Premium Female/Female Raw Custom Jumper Wires - 40 x 6 (150mm)
Our Raw F/F Jumper Wires are perfect for making custom jumper wire sets for wire harnesses or jumpering between headers on PCB's. These premium jumpers are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of the ten colors). The 0.1" spacing raw sockets on eith...
Premium Male/Female Raw Jumper Wires - 40 x 6
Our Raw Male/Female Jumper Wires are perfect for making a custom jumper wire sets for wire harnesses or jumpering between headers on PCBs. These premium jumpers are a little over 6", almost 8" (about 200mm) long and come in a 'strip' of 40 (5 pieces of the ten rainbow colors). The 0.75...
PVA Filament 1.75mm, 0.5Kg Roll - Raw (no pigment)
We've finally found the best PVA filament in Australia! This is a 500g reel of PVA (Polyvinyl Alcohol) filament.PVA hydrophobic (meaning it doesn't absorb water), but left in a water bath overnight it will completely dissolve! The water-soluble nature of this PVA filament means it is often used a...
2.13inch E-Paper (G) raw display, 250x122, Red/Yellow/Black/White
A 2.13″ four-colour e-paper raw display from Waveshare, capable of rendering red, yellow, black, and white — making it ideal for eye-catching price tags, shelf labels, and status indicators. Like all e-ink panels, it retains the displayed image indefinitely with no power applied and consumes ener...
960×680, 13.3inch E-Ink raw display, SPI interface, without PCB
A 13.3-inch e-Paper raw display panel with 960×680 resolution in black and white. This is the bare display panel without a driver board — ideal for custom integrations where you have your own driver hardware or want to design a bespoke mounting solution. The e-ink technology requires no backligh...
HIPS Filament 1.75mm, 1Kg Roll - Raw (no pigment)
We've finally found the best HIPS filament in Australia! This is a 1Kg reel of dissolve-able 1.75mm colourless (no pigment) HIPS (High Impact Polystyrene) filament.Makers frequently use HIPS as support material because it is easily removed with Limonene solution (the main component in the oi...
GNSS-RTK Positioning Kit with LoRa 868MHz (EU)
· MPN: KIT0198-EU
This GNSS-RTK kit is a complete base-and-rover positioning setup for projects that need centimetre-level location data. It uses Real-Time Kinematic correction, with a stationary base station sending RTCM correction data over an integrated LoRa 868MHz link to the mobile RTK unit.The system is buil...
GNSS-RTK Positioning Kit with LoRa (915MHz)
· MPN: KIT0198-US
This dual-module GNSS-RTK kit brings a base station and mobile rover together for high-precision positioning projects. It uses Real-Time Kinematics, where the stationary base station sends correction data to the moving rover to reduce common GNSS errors and deliver centimetre-level positioning.Th...
IMX179 8MP Autofocus USB Camera Module with Microphone
· MPN: FIT1022
This compact USB camera module is built around the Sony IMX179 image sensor, giving embedded projects an 8MP imaging option with autofocus and a USB connection. It is designed for use with platforms such as Raspberry Pi, NVIDIA Jetson, LattePanda, RDK X5 and PCs.The module uses the USB Video Clas...
MicroMod GNSS RTK Carrier Board - ZED-F9P
· MPN: GPS-17722
Built around the u-blox ZED-F9P, this MicroMod carrier gives your project high-precision GNSS and RTK positioning in a swappable, solderless MicroMod format. It supports rover and base station operation, with RTK accuracy down to millimetre-level positioning when used with suitable correction dat...
GPS-RTK Board - NEO-M8P-2 (Qwiic)
· MPN: GPS-15005
Built around the u-blox NEO-M8P-2, this breakout brings high-accuracy GNSS and GPS positioning with RTK support to the Qwiic ecosystem. It’s designed for applications where standard GPS accuracy isn’t enough, with RTK positioning down to 25mm so you can track the location of a device, robot or ve...
TCS3430/TCS34303 Ambient Tri-Stimulus Colour Sensor
· MPN: ADA6479
This breakout brings ambient light tri-stimulus colour sensing to your project using CIE XYZ plus an IR channel, rather than the more common RGB-style approach. It is designed for applications where you want access to the raw sensor count data so you can match and calibrate it to your own colour ...
TSSP77038 38kHz IR Demodulator Breakout
· MPN: ADA5940
This breakout uses Vishay's TSSP77038 infrared demodulator to give you the raw demodulated output from a 38kHz IR signal, without the extra filtering used in typical remote-control receivers. That makes it a handy choice for reflective sensing, light barriers, fast proximity detection, and modula...
TFP401 HDMI/DVI Decoder to 40-Pin TTL Breakout - With Touch
It's a mini HDMI decoder board! So small and simple, you can use this board as an all-in-one display driver for TTL displays, or perhaps decoding HDMI/DVI video for some other project. This breakout features the TFP401 for decoding video, and for the touch version, an AR1100 USB resistive touch...
Red 7-segment clock display - 1.2 digit height
I like big seven-segment displays and I cannot lie! Design a clock, timer or counter into your next project using our pretty, candy-bar sized 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments there is a top right dot (per...
Pi-DAC+
The IQaudIO Pi-DAC+ audio card for the Raspberry Pi delivers outstanding sonic performance and full-HDaudio capability with build-in hardware volume control. The Pi-DAC+ also includes a high quality audiophile headphone amp. The Pi-DAC+ is a fully compliant Raspberry Pi HAT (A+/B+/2) boar...
Adafruit ENS160 MOX Gas Sensor - Sciosense CCS811 Upgrade
The Adafruit ENS160 is a fully integrated metal-oxide (MOX) gas sensor from ScioSense, designed as a drop-in upgrade for the now-discontinued CCS811. It combines multiple MOX sensing and heating elements on a single chip to provide detailed air quality readings including TVOC (Total Volatile Orga...
Red 7-segment clock display - 0.56 digit height
A red 4-digit 7-segment clock display with 0.56″ (14.2 mm) digit height. Each digit includes a decimal point, plus a centre colon for time-based displays. Bright at 18 mcd, these displays are easy to read and can be dimmed by reducing drive current to save power. This is a raw multiplexed common...
