All Products

SKU: EC-CRF19969D

AS01-ML01DP5 is a 2.4GHZ100mW, high speed (maximum air speed up to 2Mbps) high stability, industrial grade wireless transceiver integrated digital transmission module. Module uses nRF24L01P RF chip and RFX2401C power amplifier chip, built in LNA, the receiving sensitivity of 10dBM, working in the...

SKU: PI-EMS-762

Build a working transistor-scale replica of the classic and ubiquitous analog workhorse. The "XL741" Discrete Operational Amplifier kit from Evil Mad Scientist Laboratories is a faithful and functional transistor-scale replica of the μA741 op-amp integrated circuit, the classic and ubiquitous ana...

SKU: PI-SMALL-004

Laser-cut construction kits that recreate ancient siege weaponry in miniature. Developed from original plans and historical drawings, each kit is designed to be as accurate as possible while still being an enjoyable build for all ages. Every kit comes with everything you need to assemble your si...

SKU: DF-EDU0208 · MPN: EDU0208

This hands-on STEM kit helps students build a smart drip irrigation model while learning about automated agriculture, water conservation and climate action. It combines environmental sensors with a micro:bit or UNIHIKER K10 microcontroller to monitor soil moisture and water level, then control a ...

SKU: PH-CAMJAMEDUKIT3

The third in the CamJam EduKit series, focused on robotics. This kit contains almost everything you need to build a Raspberry Pi-powered robot — just add your own Raspberry Pi (any model), chassis, and batteries. Follow the included worksheets to build a motorised buggy with obstacle detection an...

SKU: DF-FIT1022 · MPN: FIT1022

This compact USB camera module is built around the Sony IMX179 image sensor, giving embedded projects an 8MP imaging option with autofocus and a USB connection. It is designed for use with platforms such as Raspberry Pi, NVIDIA Jetson, LattePanda, RDK X5 and PCs.The module uses the USB Video Clas...

SKU: LB-LS1504

A dual-fan cooling kit with heatsinks for the Raspberry Pi 2 and 3 Model B. The two small fans mount directly over the processor and provide active airflow to reduce operating temperatures during heavy workloads. Adhesive thermal tape is included for easy, tool-free installation of the heatsinks....

SKU: DF-EDU0208-1 · MPN: EDU0208-1

This hands-on STEM kit helps students build a working smart watering system while learning about automated agriculture, water conservation and climate action. It combines BOSON environmental sensors and a water pump with the included UNIHIKER K10 AI Coding Board to monitor soil moisture and avail...

SKU: DF-FIT0807

PiTray clip is a Din Rail mounter for Single Board Computers like Raspberry Pi. Assembled of a 304 Stainless Steel blended plate and nylon clip with spring, it provides a simple, quick, strong, and durable Din Rail installation solution suitable for industrial setup, home automation application a...

SKU: DF-DFR0646-R

An 8-digit red LED segment display module with Gravity I2C interface. This module can display numbers, basic characters, and supports 16 levels of brightness adjustment — ideal for clocks, counters, dashboards, and data readouts in Arduino and Raspberry Pi projects. The Gravity connector makes w...

SKU: LB-LS3938

This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...

SKU: DF-FIT0277

The DFRobot 12V Low Noise DC Motor (Model 28PA51G) is a quiet, high-torque geared motor with a built-in two-phase hall encoder. Designed for applications where noise is a concern, it produces approximately 57–68 dBA under no-load conditions — making it well suited for indoor robotics and equipmen...

SKU: AF-1443

A 16mm illuminated pushbutton with a built-in green LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the li...

SKU: DF-FIT0441

INTRODUCTION   This is a motor revolution: a new DC brushless motor with built-in motor driver. It can be conncected to Arduino directly without external motor driver. Whatsmore, the motor comes with directional control, PWM speed control and speed feedback output, which make this motor t...

SKU: SF-WRL-19032 · MPN: WRL-19032

This Holybro SiK Telemetry Radio kit is a compact, lightweight open-source radio link for sending serial data over more than 300m out of the box. It is designed as a simple cable replacement for telemetry, RTK correction data (RTCM), MAVLink traffic, or basic serial output such as Serial.print() ...

SKU: DF-FIT0842

An ultra-thin flexible LED strip in yellow, measuring just 2.5 mm wide and 1 mm thick. With 120 SMD 0805 LEDs per metre, this 1-metre strip runs on 12V DC and can be cut every 3 LEDs to fit your exact length requirements. The incredibly slim profile makes this strip ideal for lighting in tight s...

SKU: DF-KIT0216-EN · MPN: KIT0216-EN

Built around the UNIHIKER K10, this DFRobot learning kit is designed to help beginners and makers explore modern smart hardware, IoT and artificial intelligence projects in one structured package.The kit includes six distinctive modules such as a millimetre wave human presence sensor, clutch serv...

SKU: AF-1444

A 16mm illuminated pushbutton with a built-in yellow LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired independently from the switch contacts, giving you full control over when the l...

SKU: AF-1441

A 16mm illuminated pushbutton with a built-in yellow LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independent...

SKU: AF-6215 · MPN: ADA6215

A warm-white LED filament shaped as the letter "X", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...