All Products
Showing 1-20 of 60 products
Pololu 9V, 15A Step-Down Voltage Regulator D24V150F9
The Pololu D24V150F9 is a high-current synchronous step-down (buck) voltage regulator that converts input voltages up to 40V down to a fixed 9V output. With up to 15 A available output current and typical efficiencies of 80–95%, it's well suited for powering large loads like motors, LED arrays, a...
Pololu 9V, 1A Step-Down Voltage Regulator D24V10F9
The compact (0.5″ × 0.7″) D24V10F9 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V while allowing for a maximum output current of 1 A. This regulator offers typical efficiencies between 85% and 93% and has a very l...
45W DC-DC Converter 9V@5A
A waterproof DC-DC step-down (buck) converter that accepts 16–36V DC input and outputs a stable 9V at up to 5A (45W). The sealed, shockproof enclosure and 96% efficiency make it well suited for robotics, vehicles, and outdoor installations where reliable voltage regulation is needed. Key Feature...
DC-DC Boost Power Supply Module (5PCS)
This compact DC-DC boost converter steps up input voltages from 2.5V to a selectable output of 5V, 8V, 9V, or 12V (default 12V) at over 80% conversion efficiency. Two solder pads (A and B) on the front of the module allow you to configure the output voltage — refer to the markings on the back of ...
Pololu Adjustable Boost Regulator 4-25V
Overview The Pololu adjustable boost regulator is a very flexible switching regulator (also called a switched-mode power supply, SMPS, or DC-to-DC converter) that can generate voltages higher than its input voltage. We offer two adjustable ranges: approximately 2.5 V to 9.5 V and ...
Pololu 5V, 300mA Step-Down Voltage Regulator D24V3F5
The Pololu D24V3F5 is a compact buck (step-down) switching voltage regulator that converts input voltages up to 42 V down to a fixed 5 V output. With a typical efficiency of 80–90%, it significantly outperforms linear regulators like the 7805, especially when there is a large difference between i...
Pololu 5V, 5A Step-Down Voltage Regulator D24V50F5
The Pololu D24V50F5 is a high-efficiency step-down (buck) voltage regulator that converts input voltages up to 38V down to a fixed 5V output. With a typical maximum output current of 5A and efficiency between 85% and 95%, it far outperforms linear regulators — especially when the input-to-output ...
DC-DC Multi-output Buck Converter (3.3V/5V/9V/12V)
Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required.This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9V/12V (default to 5V), which can be selected by short-circuiting the correspondi...
Pololu D42V55F8 8.4V 5A Step-Down Voltage Regulator
·
This compact Pololu D42V55F8 module is a synchronous buck switching regulator for turning a higher DC input into a stable 8.4 V output. It is suited to projects where efficiency matters, especially when the input voltage is much higher than the required output.The regulator accepts input voltages...
Pololu 12V, 2.2A Step-Down Voltage Regulator D24V22F12
The D24V22Fx family of step-down voltage regulators generates lower output voltages from input voltages as high as 36 V. They are synchronous switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) with typical efficiencies of 85% to 95%, which is much more e...
Pololu 5V, 2.5A Step-Down Voltage Regulator D24V22F5
The D24V22Fx family of step-down voltage regulators generates lower output voltages from input voltages as high as 36 V. They are synchronous switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) with typical efficiencies of 85% to 95%, which is much more e...
Pololu D42V55F24 24V 4A Step-Down Voltage Regulator
·
The Pololu D42V55F24 is a compact synchronous step-down, or buck, switching regulator for converting a higher DC input voltage down to a regulated 24 V output. It is designed for efficient power conversion in applications where a linear regulator would waste too much energy as heat.The board acce...
Pololu 3.3V, 300mA Step-Down Voltage Regulator D24V3F3
The compact (0.4″ × 0.5″) D24V3F3 switching step-down (or buck) voltage regulator takes an input voltage between 4.3 V and 42 V and efficiently reduces it to 3.3 V while allowing for a maximum output current of 300 mA. The pins have a 0.1″ spacing, making this board compatible with standard so...
20W Adjustable DC-DC Buck Converter with Digital Display
A 20W adjustable DC-DC buck converter module based on the LM2596 step-down regulator, featuring a built-in digital display that shows the output voltage in real time. Adjust the output from 1.25V to 37V using the onboard potentiometer — no multimeter needed. Wire terminals mean no soldering is re...
LM2596 DC-DC Step-Down Module IN3-40V OUT1.5-35V
This is a DC to DC step-down module based on LM2596 3A Step-Down Voltage Regulator. The LM2596 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down(buck) switching regulator, capable of driving a 3A load withexcellent line and load regul...
9 VDC 1000mA regulated switching power adapter - UL listed
A compact 9V DC 1000mA regulated switching power adapter with a 5.5mm/2.1mm centre-positive barrel jack. The switching design keeps it small, lightweight, and efficient, while the regulated output delivers a steady 9V up to 1A of current draw. Accepts 100–240V AC input, making it suitable for wo...
Pololu 5V Step-Up/Step-Down Voltage Regulator S7V7F5
The Pololu S7V7F5 is a compact buck-boost switching voltage regulator that accepts a wide input range of 2.7 V to 11.8 V and produces a fixed 5 V output with typical efficiency over 90%. It automatically steps up or steps down the input voltage as needed, making it ideal for battery-powered appli...
USB Step-up Boost Converter (5V to 9V/12V)
A USB to DC boost converter cable that steps up 5 V from a USB power source to either 9 V or 12 V output, selectable via a built-in switch. A digital LED display shows the current output voltage. Simply plug the USB end into a power bank, USB charger, or any 5 V USB source to power 9 V or 12 V de...
Pololu Dual G2 High-Power Motor Driver 24v14 for Raspberry Pi (Assembled)
The Pololu Dual G2 High-Power Motor Driver 24v14 is a Raspberry Pi expansion board that can independently control two brushed DC motors at up to 14A continuous per channel. It mounts directly onto the Pi's 40-pin GPIO header in the HAT form factor and includes an integrated 5V 2.5A step-down regu...
DC-DC 12V To 3.3V 5V Buck Step down Power Supply Module For Arduino
One input: DC 6V - 12V (input voltage to the output voltage must be higher than 1V.) Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v error), 800mA (load current can not exceed 800ma), 12V (12V input directly converter to the output) PCB board size: 4.5cm * 4.5cm With red power indicator le...
