All Products
Showing 1-20 of 60 products
Wide Input SHIM - Wide Input SHIM kit
Power your Pi with a wide range of input voltages from 3 to 16V! Wide Input SHIM lets you use a range of different power supplies with your Pi, including the ubiquitous 12V barrel jack power supplies. It's super-skinny, so you can solder it straight to your Pi's pins and st...
DC-DC Charge Discharge Integrated Module (5V/2A)
This is a DC charging and discharging integrated module, with 5V normally open output, which is not affected by load access and has a maximum load current of 2A. It features 4 levels of charge/discharge electricity indication and button-controlled output. The module comes with a built-in power ma...
SIM7600G-H 4G HAT (B) for Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support, GNSS Positioning, Global Band
4G HAT FOR RASPBERRY PI Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning Based on SIM7600G-H, Global Band Features At A Glance Connected via pogo pin or MicroUSB connector Dedicated pogo pin for Raspberry Pi Zero/Zero W MicroUSB connector for other Raspberry Pi boards or...
RainbowLink V2: 4-Channel Isolated USB to Serial Converter (RS485/RS232/Dual TTL) with Built-in 12V Power Supply
·
RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...
USB A Jack to 5.5/2.1mm jack adapter
This little dongle will let you connect one of our 5V 2Amp or 5V 10Amp adapters to something that expects to connect to USB. The premise is simple - one end has a USB A female jack and the other has a 'standard' 5.5mm OD/2.1mm ID barrel jack with center positive polarity. It does not have any...
DFRobot Solar Power Manager Kit with 9V Panel
·
Build a compact off-grid power supply for embedded electronics, IoT nodes and low-power projects with this solar power management kit from DFRobot. It combines a Solar Power Manager board for 9V/12V/18V panels with a compact 9V 220mA solar panel.The controller integrates constant-voltage MPPT sol...
Smart Charger for 18650 4.2V Li-ion battery
A 4-slot smart charger for 18650 and other cylindrical Li-ion rechargeable batteries. Each slot operates independently, so you can charge batteries of different sizes and charge levels simultaneously. USB powered for convenient use with any standard USB power source. Built-in safety features aut...
LattePanda Starter Kit (American Adapter)
DFRobot proudly presents The LattePanda Starter Kit. This kit includes everything you need to get your LattePanda going right out of the box! Includes: US standard power supply: the high-quality supply to power up your LattePanda with a solid 5V@2.5A USB cable: Durable with etched L...
PoE Splitter with USB Type C - 5V 2A - 100 MB Ethernet
Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then sepa...
5V 2A Switching Power Supply w/ USB-A Connector
This 5V 2A USB power supply provides clean, regulated power for single-board computers like the Raspberry Pi and BeagleBone, or any other USB-powered device with high current demands. It outputs via a USB Type-A port, so you can use whatever USB cable your project requires. The supply outputs 5....
USB C PD to 2.1mm Cable with Selectable Voltage Button
·
This USB C PD to 2.1mm Cable with Selectable Voltage Button will help you get the most out of your USB C Power Delivery wall warts by letting you select any of the available voltages to power a device that expects a 5.5mm outer diameter / 2.1mm inner diameter DC plug. Now you can get rid of all t...
Smart Charger for 18650 4.2V Li-ion battery with 2 x 18650
FeaturesIndependent Charging: Each of the four slots operates independently, allowing simultaneous charging of different battery sizes or charge levels.LED Indicator Lights: Red – Charging Green – Fully Charged Safe Charging Technology: Automatic stop when fully charged Cut-off voltage: 4.23...
Solar Power Manager with Panel (5V 1A)
Note: Includes Solar Power Manager 5V and Semi Flexible Monocrystalline Solar Panel (5V 1A). The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application...
5V 2A (2000mA) switching power supply - UL Listed
This FCC/CE certified and UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 2A (2,000mA) via a standard 5.5×2.1mm DC barrel jack. It accepts 110–240V AC input and is suitable for powering LED strips, motors, and other current-hungry 5V devices. Key Features Out...
Solar Power Manager, Embedded 10000mAh Li-Po Battery, Supports 6V~24V Solar Panels
SOLAR POWER MANAGER Compatible with 6V~24V solar panels, embedded 10000mAh Li-po battery Recharged From Solar Panel, Or TYPE-C Power Adapter5V/3A Regulated Output Product Features The Solar Power Manager (B) is compatible with general 6V~24V solar panels. It can recharge the 3.7V re...
M5Stack NB-IoT Module (M5311)
DescriptionThis is a wireless communication module, integrated an NB-IoT M5311 module that produced by China Mobile. The dimension if M5311 is 16mm * 18mm*2.2mm, which is very tiny, and gives convenience to the user of more flexible dimension requirement.package with LCC allows quick product...
5-Pin Type-C Male to Solderless Terminal Power Cable (30cm, 5V 2A Output)
·
This 30cm cable converts a USB Type-C connection into a 5-pin solderless screw terminal block, making it easy to wire power and data to Type-C devices without soldering or custom connectors. All five Type-C pins are broken out — positive, negative, D+, D−, and shield/ground — giving full access t...
MicroUSB Plug to 5.5/2.1mm DC Barrel Jack Adapter
This adapter cable converts a 5.5mm/2.1mm DC barrel jack power supply to a Micro USB plug, allowing you to power Micro USB devices from a standard barrel jack power adapter. The barrel jack end is centre-positive polarity. It works great for powering Arduinos, BeagleBones, Raspberry Pis, Android...
UPS HAT for Raspberry Pi Zero
DFRobot UPS HAT is an uninterruptable power supply shield designed for the Raspberry Pi Zero series, and also compatible with Pi 2/3/A+. The UPS HAT can continue to provide power to the Raspberry Pi for a certain period of time when the system is powered off, by which to avoid system damage and a...
Raspberry Pi Zero W Basic Pack - Includes Pi Zero W
Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl of cereal - while it's great on its own, you need a lot of accessories to make it a complete meal. The Pi Zero W Basic Pack is the barest of esse...
