Waveshare
Solar Power Manager, Embedded 10000mAh Li-Po Battery, Supports 6V~24V Solar Panels
SOLAR POWER MANAGER Compatible with 6V~24V solar panels, embedded 10000mAh Li-po battery Recharged From Solar Panel, Or TYPE-C Power Adapter5V/3A Regulate...
Get notified when back in stock
SOLAR POWER MANAGER
Compatible with 6V~24V solar panels, embedded 10000mAh Li-po battery
Recharged From Solar Panel, Or TYPE-C Power Adapter
5V/3A Regulated Output
Product Features
The Solar Power Manager (B) is compatible with general 6V~24V solar panels. It can recharge the 3.7V rechargeable Li-po battery through solar panel or USB TYPE-C connection, and provides 5V / 3A regulated output (with multi protocols support including PD/QC/FCP/PE/SFCP).
The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep operating with high-efficiency, stability, and safety. It is suitable for solar powered, low-power IoT, and other environmental protection projects.
- Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel
- Flexible battery recharging: from solar panel or USB TYPE-C power adapter
- Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input
- Onboard MPPT SET switch, select the level closed to input level to improve recharging efficiency
- Onboard aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance
- PH2.0 battery connector, with embedded 10000mAh 3.7V rechargeable Li-po battery
- Several LED indicators, for monitoring the status of solar panel and battery
- Multi protection circuits: over charge / over discharge / reverse-proof / over heat / over current, stable and safe to use
Specifications
SOLAR POWER MANAGERSOLAR POWER MANAGER (B)SOLAR INRECHARGINGBATTERYUSB INPUT5V OUTPUTRECHARGING CUTOFF VOLTAGEOVER DISCHARGING PROTECTION VOLTAGESOLAR PANEL RECHARGING EFFICIENCYUSB RECHARGING EFFICIENCYBATTERIES BOOST OUTPUT EFFICIENCYQUIESCENT CURRENT (MAX)CASEOPERATING TEMPERATUREDIMENSIONS
6V ~ 24V6V ~ 24V (18V by default)Solar panel, power adapter, USB3.7V 850mAh 14500 Li-ion battery (NOT included)3.7V 10000mAh Li-po battery5V (Micro USB)5V (TYPE-C, with PD quick charge support)5V / 1A (USB OUT, pin header)5V / 3A (USB-OUT, TYPE-C)4.2V ± 1％2.9V ± 1％~78%~82%~93%~86%~92%<2mAN/AMetal case-40℃ ~ 85℃65.2 × 56.2 × 22.9mm108.0 × 71.0 × 25.2mmSupports 6V~24V Solar Panels
5-Level Voltage Switch, For Setting Solar Panel Input Voltage To Improve Efficiency
Application Example
Solar-Powered Control System For MCUs / Development Boards Like:
Raspberry Pi / Jetson Nano / Arduino...
for reference ONLY, the Raspberry Pi, display, solar panel are NOT included.
More Possibilities
Suitable For Mini Solar Road Lamp, Intelligent Agriculture, Or IoT Applications
Resources Introduction
- Solar panel input
recharging through DC-002 jack or screw terminal - TYPE-C recharging/output port
supports 5V power adapter for recharging
supports PD protocol quick charge adapter
supports PD/QC/FCP/PE/SFCP multi protocols output - USB output port
5V/3A regulated output
supports PD/QC/FCP/PE/SFCP multi protocols output
- Battery on/off switch
- BOOT button
- Quick charge indicator
- Solar panel status indicators
Solar Warning: lights up if solar panel is reversed
Solar Charge: lights up when recharging from solar panel
Solar Done: lights up when the battery is fully recharged - Battery life indicators
Outline Dimensions
Resources & Services
Wiki: Solar_Power_Manager_(B)
Jargon buster
Plain-language definitions for the technical terms used above.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- electrolytic capacitor
- An electrolytic capacitor is a type of capacitor that can store relatively large amounts of electrical charge in a small package. It is commonly used for smoothing power supplies, reducing noise, and short-term energy storage, but it usually has polarity so it must be installed the correct way around.
- IoT
- Short for Internet of Things, meaning physical devices that connect to networks or the internet to send data or be controlled remotely. It matters if you want projects such as connected sensors, remote controls or classroom data-logging activities.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.
- SMD
- SMD means surface-mount device, a component style designed to be soldered directly onto the surface of a circuit board rather than through holes. SMD parts are compact and mounted flat on the board, which suits smaller and mass-produced designs.
- Type-C
- USB Type-C (USB-C) is a small, reversible USB connector used for charging, power, and data transfer on many modern devices. A Type-C port or plug indicates the cable and charger connection needed to power, charge, or communicate with a device.
- USB Type-C
- USB Type-C is a small, reversible USB connector used for power, data and sometimes video on many modern devices. The connector itself does not guarantee a particular speed or voltage, so check the supported USB version, data rate and whether it carries more than 5V via USB Power Delivery.
Find this product in
Power & Batteries
Related Tutorials
Free guides on learn.littlebird.com.au
