All Products

SKU: AF-2105 · MPN: 2105

This little 2x3 (6 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with our 6-pin IDC cable. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header p...

SKU: AF-6365 · MPN: ADA6365

This compact breakout adds a 4-pin JST SH connector to a Raspberry Pi or compatible board, giving you a quick STEMMA QT/Qwiic connection for I2C sensors and devices. The 2x3 socket plugs onto the Pi’s I2C and power pins with no soldering required, so it is easy to fit and remove when you need it....

SKU: AF-371 · MPN: 371

A 150mm (6″) IDC ribbon cable with 6-pin (2×3) socket connectors on both ends at 0.1″ × 0.1″ (2.54mm) spacing. Commonly used for AVR ISP programming connections and other 2×3 header interfaces. Key Features Socket-to-Socket – 2×3 IDC connectors on both ends Standard 0.1″ Pitch – Compatible wi...

SKU: SF-PRT-10877

This 2×3 (6-pin) shrouded header with 2.54 mm (0.1″) pitch provides a keyed connection that prevents cable mishaps. The shroud ensures correct orientation when connecting ribbon cables or IDC connectors. Key Features 6-Pin (2×3) – Dual-row header layout Shrouded/Keyed – Prevents incorrect cab...

SKU: SF-KIT-23451 · MPN: KIT-23451

Pogo pins make life so much easier when you are trying to program without having to solder a single thing, and when you attach them to an In-system programming (ISP) adapter, they become instantly better. This simple kit allows you to do just that. The ISP Pogo Adapter is a simple and easy way to...

SKU: PL-1023

A 2×3-pin (6-pin) female header with standard 0.1" (2.54mm) spacing. This compact dual-row header is commonly used for ISP programming connections, small sensor breakouts, and custom cable assemblies. The 2×3 configuration matches the standard AVR ISP programming header pinout, making it essenti...

SKU: PL-972

A 300mm (12″) 6-conductor ribbon cable with female 2×3 IDC connectors on each end. Designed to plug into standard 0.1″ (2.54mm) 2×3 shrouded box headers, and also compatible with 0.1″ male header pins. Key Features IDC Connectors – Female 2×3 IDC connector on each end 6 Conductors – Flat ribb...

SKU: PL-855

A 2×3-pin (6-pin) IDC socket with strain relief clip, designed for use with standard 2×3-pin shrouded male headers. Crimps onto flat ribbon cable for quick, solderless connections. Commonly used for AVR ISP programming cables and other 6-pin IDC applications. Specifications Type – IDC socket, ...

SKU: SF-PRT-10651

These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections organized. Simply press the connector onto your ribbon cable, no soldering required, which makes it easy to add as many mid-cable connectors as you need. Check the relate...

SKU: LB-LS3938

This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...

SKU: SF-PRT-28387 · MPN: PRT-28387

This header pin and socket set is intended for connecting the Ethernet pins on a Teensy 4.1 to a custom circuit board.The socket is designed to be soldered to the bottom side of the Teensy 4.1, making it useful when you need a neat board-to-board connection for a custom PCB design.Specifications:...

SKU: AF-5382 · MPN: 5382

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also if say you want to JTAG program a board that you can't solder headers to.Most pog...

SKU: AF-2711 · MPN: 2711

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all GPIO’s on a Raspberry Pi Mini proto area for...

SKU: SF-PRT-29920 · MPN: PRT-29920

This adapter makes it straightforward to add a wired Ethernet connection to a Teensy 4.1. It brings the functionality of the Ethernet Kit for Teensy 4.1 onto a single board, helping you get a network-capable setup together with less assembly.The tricky parts are already taken care of, with the RJ...

SKU: SF-PRT-27910 · MPN: PRT-27910

This compact 2x3-pin male SMD header is a simple board-level connector for projects that need a standard 0.1 inch pitch interface. It provides six male pins in two rows, suitable for mating with compatible 2.54 mm pitch connectors.The header is unshrouded and designed for surface-mount soldering,...

SKU: DF-DFR0116

This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino. This programmer works really well for ATmega168 and ATmega328 and should work with all the AVR micros ...

SKU: SF-CAB-29458 · MPN: CAB-29458

This IDC ribbon cable is a handy interconnect for compact electronics projects that use a 2mm pitch, 2x3-pin layout. At 120mm long, it is suited to short board-to-board runs inside enclosures or between nearby modules.The pre-terminated ribbon format helps keep wiring neat and repeatable compared...

SKU: AF-85 · MPN: 85

“How could something so simple be so useful?”  We heard once that in the 4th millenium B.C. some guy asked the person who invented the wheel that question.  The person who invented the wheel’s answer, we were told, was something like “well it’s not actually that simple - i...

SKU: SF-BOB-11189

The ‘must have’ IC for TTL/CMOS projects finally has its own breakout board! This is the RS232 converter IC that is capable of running at 3V and communicating with 5V logic.We’ve taken the SOIC package MAX3232 and broken out all the pins you need to set up your RS232 to TTL connection. We’ve also...

SKU: AF-4197 · MPN: 4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...