All Products

SKU: AF-4528

A 100 mm adapter cable that bridges the gap between Grove and STEMMA QT / Qwiic ecosystems. One end features a Grove connector, the other a JST SH (STEMMA QT / Qwiic compatible) connector — making it easy to mix and match sensors, breakouts, and host boards across different connector standards. ...

SKU: AF-4424

A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the two connector ecosystems. Both connectors have a latching feel for secure conn...

SKU: AF-4483

This 100mm adapter cable connects STEMMA QT / Qwiic sensors to Arduino MKR boards. It features a 4-pin JST SH (STEMMA QT / Qwiic) connector on one end and a 5-pin JST SH (Arduino MKR I2C) connector on the other, with the wiring crossed over for correct pin mapping between the two systems. Use th...

SKU: SF-CAB-25596

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to STEMMA Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and...

SKU: AF-5384

This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latching connection that is easy to insert and remove. Compatible with both STEMMA QT...

SKU: AF-4401

This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.This cable can be used with Qwiic or S...

SKU: AF-5862 · MPN: ADA5862

The Adafruit Grove and STEMMA QT FeatherWing brings Seeed Studio's Grove plug-and-play ecosystem to Adafruit Feather boards. With three analog/digital connectors, one UART connector, two I²C connectors, and a vertical STEMMA QT port, you can quickly connect a range of Grove sensors and modules to...

SKU: AF-5037

This cable will make it super easy to use our plug-and-play STEMMA QT boards and controllers with chips, breakouts, and other devices that are I2C compatible but don't come with a STEMMA QT socket already on 'em.On one end you get a Qwiic / STEMMA QT connector (technically known as a JST SH 4-pin...

SKU: AF-6491 · MPN: ADA6491

This compact breakout combines a Vishay VCNL4030 proximity sensor and ambient light sensor on one board. It can measure proximity from 0 to 300mm (about 12 inches) and light from 0.004 to 16,768 lux, making it a handy option for touchless controls, presence detection and light-aware projects.The ...

SKU: AF-6365 · MPN: ADA6365

This compact breakout adds a 4-pin JST SH connector to a Raspberry Pi or compatible board, giving you a quick STEMMA QT/Qwiic connection for I2C sensors and devices. The 2x3 socket plugs onto the Pi’s I2C and power pins with no soldering required, so it is easy to fit and remove when you need it....

SKU: AF-4970

I²CMini is an easy-to-use, open-source tool for controlling I²C devices over USB, 100% compatible with I²CDriver. Its a small friend that will make working with I2C a breeze, especially if they have a Qwiic/Stemma QT or even Grove I2C connector! USB to I²C interface in a tiny 18x18mm board Can a...

SKU: SF-PRT-15109

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and ...

SKU: AF-5740

This STEMMA QT adapter makes the ANO rotary navigation encoder easy to use over I2C — no GPIO-heavy wiring needed. An on-board microcontroller running Adafruit's seesaw firmware tracks all rotary pulses and button presses, saving incremental values for querying at any time over I2C. Just plug in ...

SKU: AF-4208

A 10-pack of JST SH 4-pin right-angle connectors with 1 mm pitch through-hole mounting tabs. These are the standard connectors used with the Qwiic and STEMMA QT ecosystems, making it easy to add I2C connectivity to your own PCB designs. The solid plastic housing accepts standard Qwiic cables, an...

SKU: AF-5753

Bring your classic PC joystick back to life. This adapter board takes any legacy DE-15 game port joystick and converts its analogue X/Y axes and two buttons to I2C via an onboard ATtiny816 running the Adafruit seesaw firmware. No analogue inputs needed on your microcontroller — just plug in a STE...

SKU: AF-5961 · MPN: ADA5961

The Adafruit Qwiic / STEMMA QT Breakout Board bridges the gap between the STEMMA QT / Qwiic connector world and standard 0.1" breadboard pins. One end has a JST SH-compatible connector for plug-and-play I2C, and the other has four 0.1" spaced pads for soldering headers or wires to a breadboard. ...

SKU: AF-5637

The Adafruit QT 5V to 3V Shifter Breakout lets you safely connect 3.3 V STEMMA QT / Qwiic sensors to 5 V microcontrollers like the Arduino Uno. Many I2C sensors and Qwiic-compatible devices are not 5 V safe — connecting them directly to a 5 V board risks damage. This breakout handles the voltage ...

SKU: AF-5649

The Adafruit QT 3V to 5V Level Booster Breakout lets you connect 3.3 V STEMMA QT / Qwiic devices to sensors and peripherals that require 5 V power or logic. Most modern microcontrollers (ESP32, RP2040, SAMD, micro:bit) run at 3.3 V, but some sensors and modules still need 5 V — this board bridges...

SKU: AF-5880 · MPN: ADA5880

The Adafruit I2C STEMMA QT Rotary Encoder Breakout comes with a 24-detent rotary encoder with push-switch pre-soldered, so you can start twisting right away. An onboard microcontroller running Adafruit's seesaw firmware handles all pulse tracking, debouncing, and pin management — simply read enco...

SKU: AF-6407 · MPN: ADA6407

This Bosch BMP581 breakout is a precision barometric pressure, temperature and altimeter sensor for environmental sensing, drones, wearables and projects that need to track height above sea level. It offers much finer pressure precision than earlier BMP2xx and BMP3xx generations, making it well s...