All Products
Showing 1-20 of 60 products
Gravity: 8-Digital LED Segment Display Module (Green)
An 8-digit green LED segment display module with I2C communication, part of the DFRobot Gravity sensor and module range. It provides a clear, bright numerical display with 16 levels of adjustable brightness, making it easy to show sensor readings, counters, clocks, and other numerical data in you...
Gravity: 4-Digital LED Segment Display Module (Green)
The Gravity 4-Digital LED Segment Display Module features a bright green 7-segment display with four digits, perfect for showing numbers, time, sensor readings, and other data in your projects. It communicates over I2C for simple two-wire connectivity with Arduino, Raspberry Pi, and other microco...
DFRobot Gravity LED Switch Module - Green
·
This compact illuminated push-button module combines a tactile switch with a built-in green LED indicator, making it handy for interactive electronics, control panels and classroom builds.It uses a self-locking toggle action rather than a momentary press. Press the button once and the output goes...
Gravity: LED Switch x 5 Pack
This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little buttons can be used with micro:bit to realize various fun interactive projects, such...
Gravity LED Button Module for Arduino/micro:bit - Green
·
This compact illuminated push-button module adds a simple, visible input to interactive electronics, classroom prototypes and maker projects. A transparent cap shows the integrated LED, which lights as soon as the button is pressed for clear visual feedback.It uses the Gravity PH2.0-3P connector ...
Gravity: Digital RGB LED Module
Gravity: Digital RGB LED Module is a cascadable single RGB LED module compatible with RGB LED strip. The Gravity interface provides a more elegant manner for the connections between modules and most of mainstream controllers such as Arduino, micro:bit, Firebeetle Series, LattePanda, and Raspberry...
Gravity: CH423 I2C 24 Digital IO Expansion Module
The Gravity CH423 I2C 24 Digital IO Expansion Module extends your microcontroller with 24 additional digital output/input pins over a standard I2C connection. Based on the CH423 chip, it provides 8 GPIOs with interrupt support and 16 dedicated GPOs. The built-in current drive circuit delivers up...
Gravity: Digital Green LED Light Module
This green LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal pin is set to low. The reason for this is to prevent the LED from demanding too much ...
Gravity: Digital Colorful Flashing LED Module
Gravity Colorful LED is an LED twinkles with seven colors--the colors of rainbow. It is easy to light up the LED. Turn on the power, then the LED will light up without programming. The built-in controller controls the colors and duration randomly, which makes it shine like a colorful star....
Gravity: I2C LCD1602 Arduino LCD Display Module (Green)
A 16×2 character LCD display module from DFRobot's Gravity series, connecting to your Arduino or microcontroller via a simple I²C interface — just two data wires instead of the many parallel connections a standard LCD1602 requires. Compatible with both 3.3V and 5V, with no contrast adjustment nee...
Gravity: I2C RGB LED Colorful Button Module
This is an I2C button module with RGB LED. The module not only supports reading button status like conventional ones, but also controlling RGB LED color and switching on/off the light independently, which could create more visual and interactive experiences for your projects. For example, when th...
Gravity:Digital Piranha LED Module - Green
This is a Piranha LED light module. A digital pin (LOW on, HIGH off) is used to control it. The brightness of LED can be controller via PWM output. APPLICATIONS DIY Projects Toys Games Audio indicator SPECIFICATIONS Voltage: 3.3~5v Light color: Green High luminous output Luminous Intensity: 250...
Gravity: GP8101S 1-Channel PWM to 0-5V/10V DAC Module
·
A 1-channel DAC module that converts a PWM signal from any microcontroller into a precise 0–5V or 0–10V analogue voltage output. Built around the GP8101S chip with 8-bit resolution and 0.2% accuracy, it's ideal for driving standard 0–10V or 0–5V controlled devices in automation projects — lights,...
Gravity: Bright LED Module
INTRODUCTION The Bright LED module is designed for some special application. It's using a very bright LED component as its light source. Compatible with DFRobot gravity 3-Pin interface, plug and play. What you need is just a digital signal, you can drive it directly. Besides, the LED is so b...
Gravity: Flexible 16x16 RGB LED Matrix
Good news! There is a new member in to the Gravity family - The Flexible16x16 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield. This flexible 16x16 RGB full-color LED matrix mo...
Gravity: Flexible 8x32 RGB LED Matrix
Good news! There is a new member in to the Gravity family - The Flexible 8x32 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield. This flexible 8x32 RGB full-color LED matrix module...
Gravity: Starter Kit for Arduino
The Gravity Starter Kit for Arduino is a plug-and-play electronics toolkit designed for beginners and makers getting started with the Arduino platform. It includes a DFRduino UNO R3 microcontroller (fully compatible with Arduino UNO) along with 12 popular sensors and components from DFRobot's Gra...
ELECFREAKS PlanetX LED - Green
·
A green LED module from the ELECFREAKS PlanetX sensor range, designed for use with micro:bit and the Nezha expansion board. The RJ11 connector makes it simple to plug in — no soldering or breadboard required. Control brightness via analogue input, create flashing patterns, or combine with other ...
Gravity: Flexible 8x8 RGB LED Matrix
Good news everyone! We have a new member to the Gravity family - The Flexible 8x8 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield. This flexible 8x8 RGB full-color LED matrix module...
Gravity LED Switch Module - White
·
This compact illuminated push-button module combines a tactile switch with a built-in white LED indicator, making it handy for interactive electronics, prototypes and embedded control panels.The switch outputs a digital HIGH/LOW signal and runs from +3.3-5V, so it suits common development boards ...
