All Products
Showing 1-20 of 60 products
Bluetooth 2.0 Module V3 For Arduino
A Bluetooth 2.0 serial module for Arduino, featuring the CSR BC417143 chip with a double-board design for electrostatic protection. Provides transparent serial data communication over Bluetooth with a configurable baud rate from 4800 to 1,382,400 bps. Compatible with most Bluetooth adapters, lap...
Adafruit QT Py ESP32 Pico - WiFi Dev Board with STEMMA QT
·
The Adafruit QT Py ESP32 Pico brings the full power of the classic ESP32 into the tiny QT Py form factor. Built around the ESP32-PICO-V3-02 — an all-in-one module with dual-core 240 MHz Tensilica processor, Wi-Fi, Bluetooth Classic + BLE, 8 MB flash, and 2 MB PSRAM — this thumbnail-sized board is...
SparkFun ESP32 Qwiic Pro Mini
·
Say hello to the next generation of Pro Mini boards - the SparkFun ESP32 Qwiic Pro Mini houses the powerful ESP32-PICO-MINI-N8R2 from Espressif on our compact Pro Mini footprint with 2MB of PSRAM. With two individually controllable CPU cores, adjustable CPU clock frequency, a co-processor that ca...
SparkFun MicroMod WiFi Function Board - ESP32
The SparkFun MicroMod ESP32 Function Board adds additional wireless options to MicroMod Processor Boards that do not have that capability. This special function board acts as a coprocessor that takes advantage of Espressif's ESP32 WROOM to add WiFi and Bluetooth® to your applications.At the core ...
BlueSMiRF v2 Bluetooth Serial Link with JST-GH
·
Turn a wired UART link into a dependable short-range Bluetooth® serial connection for microcontrollers, computers and mobile devices. It pairs, connects and passes data between TX and RX lines, buffering serial streams for byte-perfect delivery between radios.This JST version swaps the usual pins...
ItsyBitsy ESP32 PCB Antenna - 8MB Flash / 2MB PSRAM
·
This compact wireless development board gives you a full-featured ESP32 platform in the familiar ItsyBitsy format. It uses the ESP32 PICO ECO V3 in an FCC-certified ESP32 Pico module, combining a dual-core 240MHz processor with 2.4GHz Wi-Fi, Bluetooth® Classic and BLE, plus 8 MB of Flash and 2 MB...
Thing Plus RP2350 Wireless Development Board (Ding & Dent)
·
This Thing Plus board is a wireless development platform built around the Raspberry Pi Foundation RP2350 microcontroller. It combines the familiar Thing Plus form factor with Qwiic expansion, a µSD card socket, USB-C, LiPo charging hardware and a fuel gauge for local or remote projects.The RP2350...
ESP32 WROOM MCU Module - 16MB (PCB Antenna)
The ESP32-WROOM-32E is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. At the core of this module is the ESP32-D0WDQ6 chip. Th...
SparkFun Thing Plus - ESP32 WROOM (USB-C)
The SparkFun ESP32 WROOM Thing Plus is a Feather-compatible development board built around Espressif's ESP32-WROOM module, featuring USB-C, integrated Wi-Fi and Bluetooth, a microSD card slot, LiPo battery management with fuel gauge, and a Qwiic I2C connector for plug-and-play sensor expansion. ...
Thing Plus ESP32 WROOM (U.FL)
·
Built around Espressif’s ESP32-WROOM-32UE module, this Thing Plus board gives you a compact foundation for connected projects that need WiFi, Bluetooth and a flexible antenna setup. The onboard U.FL connector lets you attach a suitable external antenna for installations where a PCB antenna is not...
Thing Plus RP2350 Wireless Development Board
·
Build connected sensor nodes, data loggers and battery-powered IoT projects around Raspberry Pi’s RP2350 microcontroller. This Thing Plus board adds wireless connectivity, extra memory and the familiar Feather-compatible footprint in a compact development platform.The RP2350 can run two selected ...
ESP32 Dual Antenna WiFi + Bluetooth Module with 8MB FLASH
·
ESP32-WROOM-DA (the DA is for Dual Antenna) is a powerful Wi-Fi + Bluetooth Classic + Bluetooth LE MCU module, with two complementary PCB antennas in different directions. Packed with 8 MB of internal QSPI Flash, it has lots of memory and great WiFi connectivity no matter where or how it is inst...
BLE Mini
BLE Mini requires only a serial port for communication so it supports all major development platforms that have UART interface including Arduino, Raspberry Pi, Netduino, BeagleBone etc. In addition, we provide you with access to all Ti's CC2540 I/O pins and the ability to upload firmware via USB,...
FireBeetle ESP32-E IoT Microcontroller with header (Supports Wi-Fi Bluetooth)
FireBeetle ESP32-E, specially designed forIoT, is an ESP-WROOM-32E-based main controller board with dual-core chips. It supports WiFi and Bluetooth dual-mode communication, and features small size, ultra-low power consumption, on-board charging circuit and easy-to-use interface, which can be c...
LG290P Quadband GNSS RTK Breakout (Qwiic)
·
Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout and connectors as SparkFun’s GPS-RTK-SMA Breakout - ZED-F9P (Qwiic), making it a...
ESP32 WROOM MCU Module - 8MB (Dual Antenna)
The ESP32-WROOM-DA, which is a module that achieves high-quality, wireless connectivity across large areas, using two complementary PCB antennas in different directions. Also, based on its industry-leading technical specifications, the co-existence of WiFi and Bluetooth® (Classic & Low-Energy)...
SparkFun IoT RedBoard - ESP32 Development Board
The SparkFun IoT RedBoard is an ESP32 Development Board that includes everything but the kitchen sink! Espressif's ESP32 WROOM is a powerful WiFi and Bluetooth® MCU module that targets a wide variety of applications. At the core of this module is the ESP32-D0WDQ6 chip which is designed to be b...
Gravity: GP8413 2-Channel 15-bit I2C to 0-5V/10V DAC Module
This is a 2-channel DAC module with I2C communication, a resolution of 15-bit, and an accuracy of 0.2%, capable of generating analog voltage outputs of 0-10V or 0-5V. The 0-10V or 0-5V voltage range is a standard driving method. It can be widely used in automation applications such as light adju...
Gravity: GP8503 2-Channel 12bit I2C to 0-2.5V/VCC DAC Module
·
##Introduction This is a 2-channel analog voltage output DAC module with I2C communication, 12-bit resolution, and 0.1% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal outp...
Adafruit HUZZAH32 – ESP32 Breakout Board
·
The Adafruit HUZZAH32 ESP32 Breakout is a compact, breadboard-friendly development board built around the Espressif ESP32 dual-core processor. With WiFi, Bluetooth Classic, and BLE support, 4 MB SPI Flash, and a generous set of GPIO, analog, and communication peripherals, it's a powerful and affo...
