All Products
Showing 1-20 of 100 products
SimpleFOCmini Brushless DC Motor Driver Board
·
This compact DFRobot driver board is made for precise control of brushless DC motors using Field-Oriented Control (FOC). At just 26 x 21.5mm, it is well suited to tight builds where smooth motion, low noise and responsive control matter.SimpleFOCmini supports closed-loop control of motor position...
SparkFun IoT Brushless Motor Driver (ESP32 WROOM, TMC6300)
The SparkFun IoT Brushless Motor Driver is a powerful, easy-to-use motor driver that can control any 3-phase BLDC with built-in WiFi and Bluetooth® capabilities! However, with our on-board Three Phase Brushless Gimbal Motor, you can be sure of getting the best performance and reliability without ...
.jpg)
M0601 Direct-Drive Hub Motor, Right Orientation
·
The M0601 is a compact direct-drive hub motor for intelligent mobile robots, AGVs and AMRs. It combines a brushless DC motor, servo driver and high-precision encoder in a single 102mm hub, reducing the need for external motor drivers and complex wiring.Motion control is handled with advanced FOC ...
M0601 Direct-Drive Hub Motor - Left, Integrated FOC Servo
·
The M0601 is a compact direct-drive hub motor for intelligent robots, AGVs, AMRs and other mobile platforms. It combines a brushless DC motor, servo driver and high-precision encoder into a 102mm diameter unit, reducing the need for external drivers and complex wiring.Motion control is handled wi...
2208 3-Phase BLDC Motor with AS5600 Encoder - 12V 1800RPM
·
This compact 2208 three-phase brushless DC motor combines a 12V BLDC motor with an integrated AS5600 magnetic encoder, making it a practical choice for closed-loop motor control and FOC experiments. It provides 300g.cm of torque and 12-bit position feedback for smooth, low-noise motion in project...
SparkFun Brushless Motor Driver - 3-Phase (TMC6300)
The SparkFun 3-Phase Brushless Motor Driver, featuring the TMC6300 from ADI + Trinamic, is a powerful and easy-to-use three-phase motor driver that was designed to control our Brushless Gimbal Motor. It can be used to control any 3-phase BLDC or PMSM motor with up to 2A (1.4ARMS) of total driv...
DFRobot 2804 12V BLDC Motor with AS5600 Encoder
·
This compact three-phase brushless DC motor is built for advanced motion control projects where smooth torque, low noise and precise feedback matter. It runs at a rated 12V and combines a 2804 BLDC motor with a built-in AS5600 magnetic encoder for closed-loop control.The integrated encoder provid...
4015 3-Phase BLDC Motor with AS5600 Encoder
·
This compact 4015 BLDC motor combines a high-torque outer rotor motor with a factory-integrated AS5600 magnetic encoder, making it a neat motion-control package for robotics and precision motion projects.It is designed for Field-Oriented Control (FOC), also known as vector control, to support smo...
Direct-Drive Servo Motor for Robotics and AGV Drive Wheel (UART, 210rpm)
·
A compact direct-drive servo motor integrating a brushless outer-rotor motor, encoder, and servo driver into a single unit. By eliminating the traditional gearbox/reducer, it delivers smooth torque, low noise, and long life in a smaller package. The built-in driver uses a Field-Oriented Control ...
Gravity: Haptic Motor Driver for LRA Motors
·
This Gravity haptic driver module is built for Linear Resonant Actuators (LRAs), turning simple I2C commands into crisp tactile feedback for interactive projects. It is powered by the TM6605 driver chip and supports LRA resonant frequencies from 140Hz to 220Hz.The module includes 44 built-in vibr...
TB6600 arduino Stepper Motor Driver
The TB6600 is a professional stepper motor driver for two-phase stepping motors, compatible with Arduino and other microcontrollers that output 5V digital pulse signals. With a wide 9–42VDC power input and up to 4A peak current output, it handles most 42-type and 57-type stepper motors. Features...
Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D
·
Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers in our Adafruit Motorshield". If you accidentally damaged the drivers in a shield, you can use one of these puppies to replace it....
TB6612FNG Dual Motor Driver Carrier
This tiny board is an easy way to use Toshiba’s TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bipolar stepper motor. A recommended motor voltage of 4.5 V to 13.5 V and peak current output of 3 A per channel (1 A continuous) ma...
TMC260 Stepper Motor Driver Shield For Arduino
INTRODUCTION This is a stepper motor driver introduced by DFRobot for those projects require powerful stepper motors, such as a pair of automatic curtains, an XY Plotter. This shield allows Arduino drive stepper motors (up to 2A per motor coil, 40V max). This stepper mo...
Sabertooth Dual 25A DC Motor Driver
The Sabertooth 2X25 is a versatile dual DC motor driver capable of supplying up to 25A continuous (50A peak) per channel. Suitable for high-powered robots up to 100lbs in combat or 300lbs for general-purpose robotics, it features synchronous regenerative drive that recharges batteries during brak...
SparkFun Quadstepper Motor Driver Board
The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driver has an output drive capacity of 35V and 1Amps. The board is capable of driving motors in full, half, quarter, eight, and sixteenth-step modes. The lo...
SparkFun Serial Controlled Motor Driver
The SparkFun Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface. The serial interface is easy to use and it lets the user select an individual motor, the direction, and the desired speed constant (up to 10 different speed from stop to full sp...
Pololu Dual G2 High-Power Motor Driver 18v18 Shield for Arduino
The Pololu Dual G2 High-Power Motor Driver 18v18 Shield uses pairs of discrete MOSFET H-bridges to drive two large brushed DC motors. It has an Arduino shield form factor for direct plug-in use, and also breaks out all motor driver pins along the left side for standalone operation without an Ardu...
2x1.2A DC Motor Driver with Gravity Connector (TB6612FNG)
The DFRobot 2×1.2A DC Motor Driver with Gravity Connector is a compact dual-channel motor driver based on the TB6612FNG IC. This version features standard DFRobot Gravity connectors for plug-and-play wiring with Gravity-compatible expansion boards — no soldering or breadboard needed. Each channe...
2x1.2A DC Motor Driver (TB6612FNG)
The DFRobot 2×1.2A DC Motor Driver is a compact dual-channel motor driver based on the TB6612FNG IC. It requires only four GPIO pins to control two DC motors, using the same control logic as the DFRobot L298N motor driver — making existing L298N code directly compatible. Each channel delivers up...
