All Products

SKU: DF-SER0006

A lightweight 9g micro servo with 1.6 kgf·cm of torque at 4.8V. Ideal for small-scale robotics, beam robots, and automation tasks where a compact, affordable servo is needed. At only 9 grams, it fits into tight spaces while providing reliable performance. Specifications Operating Voltage – 4.8...

SKU: LB-BK-LR0259-10

A bulk pack of ten 9-gram micro servos — an affordable way to stock up for robotics, mechatronics, and RC projects. Each servo includes a ~25cm cable with a standard 3-pin female header, plus a full set of horn and screw accessories. These compact servos deliver 1.6 kg/cm of torque at 6.0V with ...

SKU: TB-YM2758

A compact 9g micro servo motor ideal for small robotics, pan-and-tilt mechanisms, and Arduino projects. With 1.6 kg·cm of torque and a fast 500°/sec speed, it's well-suited for lightweight applications where space is limited. The servo connects directly to an Arduino digital pin and is controlle...

SKU: LB-LR0259

This high quality micro-sized servo is an affordable and simple to use servo for all your mechatronic needs. This servo can operate from 3.0v-7.2v and delivering 1.6kg/cm maximum torque at 0.10 sec/60° The micro servo comes with a 3 wire ground, power and control cable with a three pin female ...

SKU: DF-SER0043

INTRODUCTION The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc. A 360 degree servo's operation is more similar to a DC motor than a standard s...

SKU: DF-SER0046

A 9g micro servo with an extended 270° rotation range, metal gears, and built-in analog feedback (0–3.3V). The wider rotation range makes it suitable for applications requiring more travel than a standard 180° servo, while the analog feedback signal enables closed-loop position control via an MCU...

SKU: DF-SER0047

A 9g micro servo with 180° rotation, metal gears, and built-in analog feedback (0–3.3V). The analog feedback signal allows connection to an MCU for closed-loop position control, providing more precise operation than standard open-loop servos. The compact 22.9 × 12.2 × 32.5mm body fits into tight...

SKU: PL-3450

A compact 6V brushed DC gearmotor with a 25:1 metal spur gearbox, delivering strong torque in a small form factor. The cylindrical design has a 20mm diameter, and the D-shaped output shaft is 4mm in diameter extending 18mm from the gearbox face plate. Key Features 25:1 Metal Gearbox – Durable ...

SKU: PI-COR-DS929-MG

The DS-929MG is a compact, metal-geared digital servo that delivers reliable performance at an excellent price point. With high-resolution positioning and fast response times, it's a versatile all-rounder for robotics, RC, and embedded projects. Key Features Metal Gearing – Durable metal gears...

SKU: DF-SER0049

A 9g micro servo with 180° rotation and a built-in clutch mechanism that protects the servo from damage when external forces are applied. If the servo angle is changed by an external force during operation, the clutch allows it to automatically reset and continue working without stripping gears o...

SKU: EF-EF09082

EF92A is a kind of 180 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and can be used to make small robot modules, mechanical arm modules and intelligent car modules.ParametersProduct SKU: EF09082Operating Voltage: 3.0V-5.5VOutput Torque: 1.6K...

SKU: DF-KIT0071

The MiniQ Discovery Robot Kit is a 2WD mobile robot platform based on the MiniQ chassis and the Romeo V2 All-in-One Arduino-compatible controller. It comes with a Sharp GP2Y0A21 distance sensor and 9g micro servo pre-included, making it ready for obstacle avoidance and sensor-based navigation rig...

SKU: SF-ROB-11887

The Hitec HS-85MG packs impressive torque into a micro-sized package. With metal gears and a single ball bearing, this servo delivers up to 3.4 kg·cm (48.6 oz·in) of torque at 6V while weighing just 21.9 g — making it an excellent choice for compact robotics, RC models, and mechatronic projects. ...

SKU: DF-SER0053

A 9g micro servo with 300° rotation and a built-in clutch mechanism that protects the servo from damage when external forces are applied. If the servo angle is changed by an external force during operation, the clutch allows it to automatically reset and continue working without stripping gears o...

SKU: SF-ROB-09065

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60° This small servo comes with a standard 3 ...

SKU: PI-COM0812

These continuous rotation servos are ideal when you need very precise degrees of rotation, to build a dial display for example.  Dimensions: 23.2×12.5×22 mm Weight: 9g Operating speed: 110RPM (4.8V) / 130RPM (6V) Stall torque : 1.3kg.cm/18.09oz.in (4.8V) / 1.5kg.cm/20.86oz.in (6V...

SKU: DF-SER0064 · MPN: SER0064

##Introduction This is an exceptional water-resistant digital servo with impressive torque. It boasts a torque capacity of 35kg and a controllable angle of 180 degrees. It exhibits superior linear motion and features an internal configuration of steel gears, with the gear axis thickened to an opt...

SKU: SU-9GMETALSERVO

Product descriptionTest Environment StandardEvery characteristic of the inspect must be normal temperature and humidity carry out the test,temperature 25±5℃ and relative humidity 65±10% of judgment made in accordance with this specification standard testing conditions. Electrical Specificat...

SKU: SF-ROB-10189

Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60° A standard 3-pin power and control cable is attached and all hardware listed below is included. Featu...

SKU: DF-SER0039

A compact 9g micro servo with metal gears, delivering 1.8 kgf·cm of torque at 4.8V. The metal gear train provides significantly better durability than plastic versions, especially in robotics applications where the servo is in near-constant motion. With a 180° operating angle and a 320:1 reducti...