All Products

SKU: DF-FIT0477

This 7" IPS display is designed specifically for the LattePanda single board computer. Simply connect it via the MIPI FPC connector and power your LattePanda — no extra power cables required. The display border is insulated with black tape to prevent short circuits, making it safe to use even wit...

SKU: DF-FIT0950

This 7" IPS touch display connects to the LattePanda Mu and LattePanda Sigma via eDP (Embedded DisplayPort) interface, delivering excellent visual quality with 1024×600 resolution and full viewing angle support. The multi-touch panel features 6H surface hardness for scratch resistance and a fully...

SKU: DF-FIT1030 · MPN: FIT1030

This 7-inch multi-touch display is made specifically for the LattePanda IOTA and LattePanda 3 Delta single-board computers. It connects over eDP (Embedded DisplayPort), using the native display output on those boards for a cleaner setup than a generic HDMI screen.The IPS panel provides a 1024 x 6...

SKU: DF-FIT0551

This 7" IPS touch display connects to the LattePanda Alpha and LattePanda Delta via eDP (Embedded DisplayPort) interface. With 1024×600 resolution, 178° viewing angle, and high colour saturation, it delivers excellent visuals for HMI and portable projects. The fully laminated, dust-proof design ...

SKU: DF-DFR0506

This 7" HDMI display with capacitive touchscreen supports up to 5 touch points and uses DFRobot's USB free-driver technology — simply plug in via USB for instant touch control with no driver installation required. It works like a keyboard or mouse on any compatible system. The display supports W...

SKU: EC-SEE00804D

The All-in-one Starter Kit for ESP32-P4 is a complete learning platform built around Espressif's ESP32-P4, a high-performance 32-bit RISC-V dual-core microprocessor with powerful image and voice processing capabilities. It integrates 16 common sensor modules on a single circuit board, eliminating...

SKU: WS-13857

A 7-inch IPS HDMI display with case from Waveshare, featuring 1024×600 hardware resolution (configurable up to 1920×1080 via software). The toughened glass capacitive touch panel (6H hardness) provides smooth 5-point touch input on supported systems. Compatible with Raspberry Pi, Jetson Nano, Be...

SKU: DF-DFR1262 · MPN: DFR1262

This 6.67-inch flexible AMOLED panel is made for curved, form-fitting display prototypes where a rigid screen will not suit the design. Its bendable substrate keeps the module very thin, with a maximum thickness of just 1.2mm.The display runs at a native 2400x1080 (SPR) resolution with 450cd/m² b...

SKU: DF-DFR0546-1 · MPN: DFR0546-1

This compact LattePanda 2 Alpha 864s kit is a pocket-sized single board computer built around an Intel Core i5 processor, with 8GB of memory and low power consumption for embedded computing projects.It is suited to edge computing, vending machines, advertising displays, industrial automation, IoT...

SKU: DF-FIT0478

This capacitive touch panel overlay adds touch input to your LattePanda 7" IPS Display (sold separately). Simply apply the adhesive panel over the display, connect the FPC cable, and power the board for a complete touch interface. The panel features 6H surface hardness for scratch resistance, 85...

SKU: DF-DFR0545-1 · MPN: DFR0545-1

This compact single board computer brings PC-class computing into maker, IoT, edge computing and automation projects. Based on an Intel Core m3 processor, it can run full Windows 10, Linux and Android systems while staying small enough to embed inside interactive builds, robotics controllers, kio...

SKU: DF-DFR0547-1 · MPN: DFR0547-1

This compact LattePanda kit is a pocket-sized, low-power single board computer for projects that need a full desktop operating system in an embedded form factor. The supplier lists it as the Win11 Pro activated configuration, with support for Windows 10, Windows 11, Linux and Android depending on...

SKU: AF-2395

A 7-inch touchscreen display with 1024×600 resolution and a resistive touchscreen overlay, ideal for Raspberry Pi projects, embedded computing, and multimedia setups. The included driver board supports HDMI, VGA, and composite (NTSC/PAL) inputs, making it compatible with a wide range of devices. ...

SKU: DF-DFR0009-BP

This is the back panel pcb of 1602 Arduino LCD Shield. This shield allows you to place your own LCD onto this shield. It only requieres a 16x2 HD44780 compatible LCD. This Shield uses Arudino LCD4Bit library. The pcb is compatible with the following LCD: Basic 16x2 Character LCD -...

SKU: WS-26189

A 7-inch IPS USB monitor designed as a PC case secondary screen or desktop ambient display. Connects via USB for both video and power — no HDMI cable required. The IPS panel provides wide viewing angles and vibrant colours, making it well-suited for system monitoring, music visualisations, or as ...

SKU: AF-2397

This 7″ display kit features a 1024×600 resolution TFT panel with a resistive touchscreen overlay and HDMI stereo audio output. The included driver board accepts HDMI, VGA, and composite (NTSC/PAL) video inputs, making it compatible with Raspberry Pi, BeagleBone, and any device with standard vide...

SKU: AF-2396

This 7" HDMI display with resistive touchscreen delivers 1024×600 resolution in a compact form factor ideal for Raspberry Pi, BeagleBone Black, and other single-board computers. The included mini driver board is powered via USB and accepts HDMI input for high-quality video output. The kit also i...

SKU: DF-FIT0630

A 30-pin FPC cable designed specifically for connecting the LattePanda Alpha and Delta single-board computers to their 7-inch eDP display. The ultra-thin, flexible design with interference shielding ensures reliable video signal transmission in compact builds. Key Features LattePanda Compatibl...

SKU: DF-FIT0476

A 10.1" IPS display with 1280 × 800 resolution and HDMI, VGA, and composite (AV) inputs, designed for use with the LattePanda, Raspberry Pi, and other mini PCs. The wide compatibility and high brightness make it suitable for digital photo frames, video playback, robotics interfaces, and more. Th...

SKU: AF-2300

Yes, this is a 7" TFT display with 1024x600 resolution and a cute little driver board. We tried to get the best medium-size display that would be good for embedded computing usage and at a good price. And we also tried to match it with a small driver board that can be powered from a USB p...