All Products

SKU: RP-PICO-W-ELEC

If you're looking for a Raspberry Pi Pico W Starter Kit, look no further!This is an awesome and affordable electronics kit for the Raspberry Pi Pico W.The components of this Pico W Electronics Kit enable you to create electronics circuits for light and sound.Pico Breadboarding can be hard, tha...

SKU: PR-PIM300

The Pico HAT Hacker is an ultra-thin breakout board that gives you full access to all 40 GPIO pins on your Raspberry Pi. At just 0.8 mm thick, it solders directly onto the Pi's header pins while leaving enough pin height to fit a HAT or pHAT on top. Both sides of the board feature pin labels — B...

SKU: PR-PIM311

The Pico HAT Hacker gives you full access to all 40 GPIO pins on your Raspberry Pi, broken out at the top of the board. Its ultra-thin 0.8 mm PCB can be soldered directly onto the Pi's header pins while still leaving enough pin height to stack a HAT or pHAT on top. Both sides of the board featur...

SKU: PR-PIM548

Add 2.4 GHz Wi-Fi connectivity and local storage to your Raspberry Pi Pico with this compact add-on pack. The Pico Wireless Pack attaches to the back of your Pico using pre-soldered female headers — no soldering required (as long as your Pico has header pins attached). Powered by an ESP32-WROOM-...

SKU: PR-PIM545

Stop scrolling! And take a moment to appreciate the simplicity and elegance of a bright white LED, so often overlooked next to its flashy RGB cousins. Pico Scroll Pack incorporates 119 white LEDs in a tidy 7x17 matrix, along with four tactile buttons for interacting with your Pico-based contrapti...

SKU: WS-20550

A clear acrylic protection case designed specifically for the Raspberry Pi Pico. The dual-sided design shields both the top and bottom of your Pico board from scratches, dust, and accidental short circuits while keeping the board fully visible. The case features clear acrylic panels with a neat,...

SKU: WS-20682

The Pico-LoRa-SX1262-868M is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262, which supports LoRaWAN protocol and EU868 band. It is allowed to connect the TTN, TTS servers through a LoRa gateway to use LoRa Cloud service fast and easily. Standard Raspberry Pi Pico heade...

SKU: PR-PIM588

A demo board for exploring the digital video and audio capabilities of Raspberry Pi Pico, with HDMI connector, SD card slot, line level I2S audio and buttons. Intrigued by the possibilities of VGA Demo Base but no longer own a D-sub cable? No problem! This board is an all-digital conversion of Ra...

SKU: AF-5160

Cytron's Maker Pi Pico Base incorporates the most wanted Reset button for your Raspberry Pi Pico and gives you access to all GPIO pins on two 20-pin headers, with clear labels. Each GPIO is paired with an LED indicator for convenient code testing and troubleshooting. The bottom of the board even ...

SKU: AF-5395

The Adafruit QT Py ESP32 Pico brings the full power of the classic ESP32 into the tiny QT Py form factor. Built around the ESP32-PICO-V3-02 — an all-in-one module with dual-core 240 MHz Tensilica processor, Wi-Fi, Bluetooth Classic + BLE, 8 MB flash, and 2 MB PSRAM — this thumbnail-sized board is...

SKU: WS-21667

SX1262 LoRa Node Module For Pico LoRaWAN Protocol Support Features At A Glance The Pico-LoRa-SX1262-XXXM is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262 with better performance than the SX127X series. The LoRa modulation technology solves the balancing prob...

SKU: PR-PIM634

A svelte 2.9" (296x128px) mono E Ink® display for Raspberry Pi Pico / Pico W. Pico Inky Pack features the speedy 2.9" e-paper display that you can find on Badger 2040, coupled with three handy buttons for interfacing. Equip it to the back of your Pico or Pico W to give it a classy, readable disp...

SKU: SB-PICOWIFIHAT

Raspberry Pi Pico WiFi HAT is a compact and easy-to-use WiFi HAT for the Raspberry Pi Pico that includes an ESP8266 module, IEEE 802.11b/g/n WiFi Standard, 3.3 V Operating Voltage, UART Communication interface, and a 40-pin GPIO extension header that can be controlled via AT Command and supports...

SKU: PR-PIM551

Scoring very highly in the Pimoroni "things on our desk that make people say ooo" rankings, RGB Keypad Base equips a Pico with an eye-catching 4x4 silicone keypad, fully loaded with addressable APA102 LEDs so that each key can be illuminated in any colour that your little unicorn heart desires...

SKU: SB-21468

Pico Driver Motor HAT is a DC motor control module that is powered by one H-bridge IC L293D with the motor input supply range 6 V-12 V. It is designed to connect 2 DC motors simultaneously or 1 stepper motor that would help the user to make projects in a compact size with high efficiency. You ca...