All Products
Collections
Showing 81-94 of 94 products
Air Pump and Vacuum DC Motor - 4.5V and 1.8 LPM - ZR320-02PM
SparkFun Qwiic Haptic Driver - DA7280
N20 DC Motor with Magnetic Encoder - 6V with 1:50 Gear Ratio
N20 DC Motor with Magnetic Encoder - 6V with 1:298 Gear Ratio
N20 DC Motor with Magnetic Encoder - 6V with 1:100 Gear Ratio
Motor SHIM for Pico
HRB8825 Stepper Motor HAT For Raspberry Pi
Motoron M3H256 Triple Motor Controller for Raspberry Pi (No Connectors or Standoffs)
Motorized Slide Potentiometer - 10KΩ Linear with 5V DC Motor
Motoron M3S256 Triple Motor Controller Shield for Arduino (Connectors Soldered)
Motoron M2H18v18 Dual High-Power Motor Controller Kit for Raspberry Pi
TT Motor Bi-Metal Gearbox Double Sided Axle and 1:90 Gear Ratio
MPN: ADA5857
Turtle: 2WD Arduino Mobile Robot Platform
Mini 3-Layer Round Robot Chassis Kit - 2WD with DC Motors
Air Pump and Vacuum DC Motor - 4.5V and 1.8 LPM - ZR320-02PM
A compact DC-powered air pump for inflatables and air-powered projects. Power it with ~4.5V (5V works fine) and it draws about 600mA, making it easy to run from the same supply as your DC motors or servos. The pump sucks air in from the side of the casing and pushes it out the tubing port. Contr...
SparkFun Qwiic Haptic Driver - DA7280
The SparkFun Qwiic Haptic Driver pairs a compact Linear Resonant Actuator (LRA) vibration motor with Dialog Semiconductor's DA7280 motor driver IC for projects that require haptic feedback. Control the vibration motor via I2C, PWM, or a combination of three general-purpose input pins. Qwiic conn...
N20 DC Motor with Magnetic Encoder - 6V with 1:50 Gear Ratio
This N20 micro geared DC motor includes a built-in magnetic encoder wheel and two Hall effect sensors, providing speed and direction feedback without additional wiring. The compact N20 form factor makes it well suited for small robotics projects requiring precise motor control. The motor runs on...
N20 DC Motor with Magnetic Encoder - 6V with 1:298 Gear Ratio
This N20 micro DC gearmotor includes a built-in magnetic encoder with two Hall effect sensors, providing both speed and direction feedback without additional wiring. The compact N20 form factor makes it ideal for small robotics projects where precise motor control is needed. The magnetic encoder...
N20 DC Motor with Magnetic Encoder - 6V with 1:100 Gear Ratio
The first step in a robotics project is to get a motor spinning. Once you've done that you quickly learn that not all motors go the same speed, even if they are the same part number! There are always variations that relate to voltage, environment, and manufacturing changes. So, the second step is...
Motor SHIM for Pico
A compact motor driver add-on for the Raspberry Pi Pico, based on the DRV8833 dual H-bridge. Solders directly to the back of a Pico and provides two JST-ZH connectors for micro metal gearmotors. Also includes a user button and a Qw/ST (Qwiic/STEMMA QT) connector for attaching I²C breakout boards....
HRB8825 Stepper Motor HAT For Raspberry Pi
HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping Stepper Motor HAT (B) Alternative Solution Of Stepper Motor HAT, Drives Two Stepper Motors, Up To 1/32 Microstepping For 3D Printer, Sculpturing machine, Mechanical arm... Features At A ...
Motoron M3H256 Triple Motor Controller for Raspberry Pi (No Connectors or Standoffs)
The Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each module can independently control up to three motors, and multiple Motoron boards can be stacked on top of the same Raspberry Pi for projects that ne...
Motorized Slide Potentiometer - 10KΩ Linear with 5V DC Motor
A 10KΩ linear slide potentiometer with a built-in geared DC motor underneath the slider. The motor can move the wiper up and down programmatically, while the slider also moves freely by hand when the motor is unpowered. This combination allows both manual and digital control — commonly seen in pr...
Motoron M3S256 Triple Motor Controller Shield for Arduino (Connectors Soldered)
The Motoron M3S256 Triple Motor Controller Shield for Arduino makes it easy to control DC motors from an Arduino or Arduino-compatible board through an I²C interface. Each module can independently control up to three motors, and multiple shields can be stacked on top of the same Arduino for proje...
Motoron M2H18v18 Dual High-Power Motor Controller Kit for Raspberry Pi
The Motoron M2H family of dual high-power motor controller add-on boards makes it easy to control up two bidirectional, brushed DC motors with a compatible Raspberry Pi (Model B+ or newer). The M2H controllers are designed to stack on top of a Raspberry Pi (Model B+ or newer), similar to a HAT...
TT Motor Bi-Metal Gearbox Double Sided Axle and 1:90 Gear Ratio
· MPN: ADA5857
These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Bi-Metal Gearbox Motor with a gear ratio of 1:90, about double the 'standard' 1:48 ratio. That gives them higher torque but slower rotational speed. Si...
Turtle: 2WD Arduino Mobile Robot Platform
The Turtle is a compact 2WD mobile robot platform designed for use with Arduino and other microcontroller boards. It comes as a kit with two geared DC motors, rubber wheels, a rear caster ball, an aluminium alloy chassis, and all mounting hardware needed for assembly. The top layer includes a st...
Mini 3-Layer Round Robot Chassis Kit - 2WD with DC Motors
A compact three-layer round robot chassis kit with two DC drive motors, matching wheels, and a caster ball for balance. The high-strength anodised aluminium alloy frame provides a sturdy platform for building your own 2WD mobile robot, with three layers of mounting space for batteries, controller...
