All Products
AI Overview
“Grove” typically refers to Seeed Studio’s 4‑pin, plug‑and‑play modular sensor ecosystem (easy, no-solder connections). Here are the best matches by use case:
Grove kits (best for getting started)
- Grove Inventor Kit for micro:bit (micro:bit, sensors + actuators bundle) $125.10
- Grove Starter Kit for Raspberry Pi Pico (Raspberry Pi Pico, Grove modules + learning bundle) $98.30
- Grove - Starter Kit for Arduino (Arduino with Grove Base Shield) $93.60
Grove “shields” / adapters (to add Grove ports to your board)
- Grove Shield for micro:bit (micro:bit → Grove connectors expansion) $22.15
- Grove Shield FeatherWing for Particle Mesh and all Feathers (Feather/Particle Mesh → Grove connectors) $13.70
Common Grove modules (sensors / inputs)
- Grove - Button (momentary pushbutton module) $4.65
- Grove - Sound Sensor (microphone / sound level sensing) $6.20
Grove cables & interconnects (for wiring/compatibility)
- GROVE Cable 100cm-1pcs (1 m Grove cable) $4.90
- GROVE Cable 50cm-2pcs (2-pack, 50 cm Grove cables) $4.90
- Grove to Pin (Grove extension/adapter for flexible hookups) $5.25
- Grove Cable Pigtail - 2mm pitch 100mm long (Grove → bare wire pigtail, 100 mm) $2.15
Grove ↔ Qwiic / STEMMA QT (I2C ecosystem bridging)
- Qwiic Cable - Grove Adapter (150mm) (Qwiic ↔ Grove adapter cable) $4.95
- Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long (Grove ↔ JST-SH STEMMA QT/Qwiic, 100 mm) $4.15
Grove Zero (education line)
- Grove Zero Starter Kit entry kit $19.55
- Teaching With Grove Zero teaching resource $0.02
What are you trying to do with Grove?
Collections
Showing 81-96 of 96 products
Seeed Studio XIAO ESP32C3
JST PH Compatible 2.0mm Connector Kit - 220 Piece
MPN: ADA4422
Adafruit SHARP Memory Display Breakout - 1.3 168x144 Monochrome
SparkFun Soil Moisture Sensor
Gravity: Soil Moisture Sensor For Arduino
Micro Metal Gearmotor Extended Bracket (Pair)
Gravity IoT Starter Kit for micro:bit
GPS/GNSS Magnetic Mount Antenna SMA - 3m
Octopus MQ3 Alcohol Sensor Brick
Octopus PM2.5 module
Gravity: SGP40 Air Quality Sensor
2-Channel Level Converter (12V to 3.3V)
Gravity: BMP388 Barometric Pressure Sensors
URM06 - Analog Ultrasonic Sensor
M5Stack ATOM Matrix ESP32 Development Kit
EasyESP-1: An ESP8266 experimenter board for beginners
Seeed Studio XIAO ESP32C3
The Seeed Studio XIAO ESP32C3 is a compact microcontroller board built around the ESP32-C3 RISC-V SoC. It features complete Wi-Fi and Bluetooth 5.0/BLE connectivity in the signature XIAO thumb-sized form factor (21 × 17.8 mm), making it well suited for IoT, wearables, and low-power wireless proje...
JST PH Compatible 2.0mm Connector Kit - 220 Piece
·
This 220 piece connector assortment gives your workstation a handy supply of 2.0mm pitch JST-PH compatible plugs, sockets and crimp terminals. It is a useful kit for prototyping, repairs and making up custom leads for common maker electronics.JST-PH style connectors are widely used in electronics...
Adafruit SHARP Memory Display Breakout - 1.3 168x144 Monochrome
The Adafruit SHARP Memory Display Breakout features a 1.3" 168×144 monochrome LCD that combines the ultra-low power consumption of e-paper with the fast refresh rates of a traditional LCD. The display shows crisp black pixels on a grey background, giving a pleasant e-reader appearance that's exce...
SparkFun Soil Moisture Sensor
The SparkFun Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials. The soil moisture sensor is pretty straight forward to use. The two large exposed pads function as probes for the sensor, together acting as a variable resistor. The more water that is...
Gravity: Soil Moisture Sensor For Arduino
A resistive soil moisture sensor that reads the water content of surrounding soil by measuring electrical resistance between its two probes. Wetter soil conducts more easily (lower resistance), while dry soil conducts poorly (higher resistance) — giving you an analogue voltage output proportional...
Micro Metal Gearmotor Extended Bracket (Pair)
This compact bracket enables convenient mounting of popular micro metal gearmotors. The plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation. This version has mounting tabs that allow for use with our 49x12 Wheels. SHIPPING...
Gravity IoT Starter Kit for micro:bit
IoT Starter Kit is an all-in-one bundle for micro:bit beginners to fast experience and build Internet of Things projects.The kit comes with a micro:bit microcontroller, a Wi-Fi module and 7 sensors/actuators that are wildly used in real-life IoT applications.You can easily setup the Wi-Fi connect...
GPS/GNSS Magnetic Mount Antenna SMA - 3m
This GPS/GNSS magnetic mount antenna is designed for multi-constellation reception, supporting both GPS and GLONASS satellite systems. The magnetic base allows easy mounting on any metal surface such as a vehicle roof or ground plate, and the 3 m cable with standard SMA connector provides flexibl...
Octopus MQ3 Alcohol Sensor Brick
The Octopus MQ3 Alcohol Sensor Brick from ElecFreaks is an analogue gas sensor module with high sensitivity to alcohol vapour. It outputs an analogue voltage proportional to the detected alcohol concentration, making it straightforward to interface with Arduino and other microcontrollers. The MQ...
Octopus PM2.5 module
The Octopus PM2.5 module from ElecFreaks is a laser-based particulate matter sensor built around the ZH03B dust sensor. It measures PM2.5 concentration in the air with high consistency and real-time response, capable of detecting particles as small as 0.3 µm in diameter. Part of the Octopus elec...
Gravity: SGP40 Air Quality Sensor
The Gravity SGP40 Air Quality Sensor uses Sensirion's SGP40 digital VOC sensor chip with built-in temperature and humidity compensation. It outputs a VOC index (0–500) that can be used directly to evaluate indoor air quality without calibration. The Gravity interface provides plug-and-play connec...
2-Channel Level Converter (12V to 3.3V)
The 2-Channel Level Converter translates 12V signals down to 3.3V using optocoupler isolation, making it easy to interface industrial sensors and PLC signals with 3.3V microcontrollers like Arduino. It supports common anode, common cathode, and differential signal inputs with PNP output (NPN to P...
Gravity: BMP388 Barometric Pressure Sensors
This new released BMP388 barometric pressure sensor by DFRobot is equipped with the functionality of temperature and pressure measurement. It supports Arduino code control. Compared with the earlier version of BMP180, BMP280, and BMP388, this sensor exhibits lower power consumption, higher resolu...
URM06 - Analog Ultrasonic Sensor
Ultrasonic sensors emit ultrasonic pulses, and by measuring the time of ultrasonic pulse reaches the object and back to the transducer, the distance of sensor from the target object is calculated. They are widely used in detecting displacement, thickness, distance, water level, material level and...
M5Stack ATOM Matrix ESP32 Development Kit
The ATOM Matrix, at only 24 x 24mm, is the most compact development board in the M5Stack development kit series. The fits-in-your-change-pocket size computer contains a ESP32-PICO-D4 chip, which comes integrated with WiFi, Bluetooth, and 4MB of integrated SPI flash memory. All this along with its...
EasyESP-1: An ESP8266 experimenter board for beginners
The EasyESP-1 is a beginner-friendly development board for the ESP8266 Wi-Fi microcontroller, based on the ESP-12E module. It includes an onboard USB-to-serial converter (CP2102) so you can program and debug directly over USB — no additional hardware required. All GPIO pins are broken out to 2.5...
