All Products

SKU: SF-SEN-29529 · MPN: SEN-29529

This ultra-small Qwiic-enabled breakout adds three-axis acceleration sensing to compact projects using the LIS3DH, a smart, low-power capacitive micro-machined accelerometer with 12-bit resolution. It can be used for translation detection and is classified as a 3DoF, or 3 Degrees of Freedom, sens...

SKU: SF-COM-16917 · MPN: COM-16917

Show numbers, letters, characters and symbols in bright blue with this compact four-character alphanumeric display. Each digit uses fourteen segments, giving you far more flexibility than a standard seven-segment display.It connects through the SparkFun Qwiic system, so setup is simple: plug in a...

SKU: SF-PRT-26784 · MPN: PRT-26784

This compact Qwiic board lets you switch power to downstream Qwiic devices so high-current modules can be turned off when they are not needed. That can help conserve energy in battery-powered builds using GNSS and other power-hungry Qwiic boards.It also provides I2C bus isolation, so slower 100kH...

SKU: SF-COM-16916 · MPN: COM-16916

Add letters, numbers and symbols to your project with red fourteen-segment digits that are much more flexible than a basic seven-segment display. This Qwiic display connects over I2C, so you can plug it in without soldering, without working out SDA and SCL by hand, and without adding separate vol...

SKU: SF-SEN-29260 · MPN: SEN-29260

Measure high concentrations of carbon dioxide with a Qwiic breakout built around Sensirion’s STC31 sensor. It is designed for CO2 measurements up to 100% volume, using a thermal conductivity measurement principle and Sensirion CMOSens® technology for repeatable, stable readings.The board also inc...

SKU: SF-SEN-29528 · MPN: SEN-29528

Add motion sensing to your project with this Qwiic-enabled LIS3DH breakout. The LIS3DH is a smart, low-power, three-axis capacitive micro-machined accelerometer with 12-bit resolution, suited to translation, motion, orientation and tap detection.This board is classified as a 3DoF, or 3 Degrees of...

SKU: SF-PRT-26851 · MPN: PRT-26851

Add five-way navigation input to an I2C project without building a button matrix from scratch. Press up, down, left, right or centre on the low-profile directional pad to send button input to your microcontroller.The board uses a PCA9554 8-bit I2C I/O expander to read the momentary buttons, with ...

SKU: SF-KIT-21301

A note for SparkFun Inventor's Kit v4.1 users: The only change that was made from the SIK v4.1 to the SIK v4.1.2 is our new carrying case. All of the internal parts and instructional guide have remained the same! The SparkFun Inventor's Kit (SIK) is a great way to get started with programmi...

SKU: SF-KIT-30714 · MPN: KIT-30714

Bring robotics, coding and plant science together in a hands-on classroom platform for building a small-scale automated smart farm. This open-source kit is designed for STEM education, helping students explore precision agriculture, data analysis and automation while growing and caring for real p...

SKU: SF-ROB-30118 · MPN: ROB-30118

Stepper motor builds often need a microcontroller, a separate driver, a 12V or 24V supply and plenty of wiring. This compact controller from Things by Josh brings that stack together in one unit designed to mount directly to the back of a standard NEMA 17 stepper motor.Power comes in via USB-C Po...

SKU: SF-COM-26850 · MPN: COM-26850

This compact 5-way directional pad gives your microcontroller project a familiar tactile input for up, down, left, right and centre presses.It is an SMD switch, making it suitable for custom PCBs where you need a low-profile navigation control or menu input without using multiple separate buttons...

SKU: SF-SEN-17059 · MPN: SEN-17059

This PT100 is a platinum RTD (Resistance Temperature Detector) for accurate temperature sensing. It has a nominal resistance of 100Ω at 0°C, with resistance changing as temperature changes.It is suitable for applications across a broad temperature range, and is commonly used where stable, repeata...

SKU: SF-WRL-26060 · MPN: WRL-26060

This development board is designed to make building a LoRaWAN® IoT end node much less fiddly. It combines Digi X-ON™ onboarding with the SparkFun Qwiic ecosystem, so you can connect supported Qwiic sensors and get data moving to the cloud quickly.The board ships with firmware installed that can c...

SKU: SF-KIT-17727 · MPN: KIT-17727

Got a Raspberry Pi 4 ready to go? This bring-your-own-Pi kit bundles the accessories needed to turn an HDMI monitor into a Raspberry Pi desktop PC or media centre, without including the Raspberry Pi board itself.The kit includes a blank 64GB microSD card with adapter, selected for smooth Raspberr...

SKU: SF-GPS-29208 · MPN: GPS-29208

Built around Septentrio’s mosaic-G5 P3, this compact GNSS RTK breakout is designed for projects that need survey-grade positioning without giving up space or power budget. It offers the same leading performance as the mosaic-X5 in a package that is 60% smaller and consumes 40% less power.The rece...

SKU: SF-KIT-30715 · MPN: KIT-30715

Add another controlled planting area to an existing AgXRP Starter Kit with this DIY expansion pack. It is designed to create a completely independent watering zone, so students can compare plant types, watering schedules and soil conditions side-by-side.The pack works with the XRP Controller in t...

SKU: SF-KIT-16383 · MPN: KIT-16383

This starter kit is built around the Raspberry Pi 4 Model B with 2 GB of RAM, giving you the core board and essential accessories needed to get a Pi 4 project running.The Raspberry Pi 4 uses Micro HDMI for display output and USB Type-C for power, so the kit includes a Micro HDMI to HDMI cable and...

SKU: AF-5870 · MPN: ADA5870

This compact breakout adds a high-resolution, single-channel ADC to your I2C bus, making it a handy choice for precision differential measurements. It is built around the MCP3421, a simple and low-cost 18-bit ΔΣ converter with adjustable gain, a built-in precision reference voltage, and support f...

SKU: SF-KIT-30716 · MPN: KIT-30716

Add another automated planting zone to your AgXRP setup with this expansion for the AgXRP Starter Kit. It lets students and educators add a second pump and soil moisture sensor, so they can water a second plant independently and compare soil conditions or watering schedules side by side.The pack ...

SKU: SF-SEN-14349

This is not your normal Passive Infrared (PIR) sensor! The SparkFun AK9753 Human Presence Sensor Breakout is a Qwiic-enabled, 4-channel Nondispersive Infrared (NDIR) sensor. Each channel has a different field of view, so not only can the AK9753 detect a human, but it can also tell which directio...