All Products
Showing 61-80 of 100 products
12V Flexible LED Strip (120 LEDs) - Ice Blue
An ultra-thin flexible LED strip in ice blue, measuring just 2.5 mm wide and 1 mm thick. With 120 SMD 0805 LEDs per metre, this 1-metre strip runs on 12V DC and can be cut every 3 LEDs to fit your exact length requirements. The incredibly slim profile makes this strip ideal for lighting in tight...
DFRobot GDI-Line-30CM 18-Pin Reverse FPC Cable - 5 Pack
·
This 30 cm flat flex ribbon cable is made for connecting compatible GDI display modules to controller boards. It uses an 18-pin reverse FPC layout with a 0.5 mm pitch, helping keep display wiring neat in compact electronics builds.The flexible polyimide construction is designed to handle tight ro...
Ultra-Slim Round Fingerprint Sensor and 6-pin Cable
·
Secure your project with biometrics - this adorably tiny, all-in-one, optical fingerprint sensor will make adding fingerprint detection and verification super simple. It's extremely slim, with a plastic casing that can be glued or panel mounted into any enclosure! There are some embedded blue LED...
Pibow 3 B+ Coupé (Raspberry Pi 3 B+, 3, 2) - Coupé Flotilla
Pibow Coupé. The slim, hackable, and attractive case for the Raspberry Pi! Note: We've redesigned Pibow Coupé to be compatible with the Raspberry Pi 3 B+, 3, and 2. Due to changes in the layout of the Raspberry Pi 3 B+, older Pibows (ones with a 3/2/B+ label) will not work with ...
Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Lid - Smoke Gray
·
A snap-on replacement lid in smoke grey for the Raspberry Pi Model B+/Pi 2/Pi 3 polycarbonate case. Mix and match with different coloured bases to customise your Pi's look. The super-glossy polycarbonate is durable enough for bags and toolboxes. The lid fits snugly onto the case base with slim o...
NeoPixel Addressable RGB LEDs - Slim Flat 3.2mm x 1.0mm 10 pack - SK6812-EC3210F
·
These incredibly small and slim surface-mount NeoPixel LEDs are an easy way to add a lot of very tiny (but bright!) colorful baguette diamond LEDs to your project. They are just 3.2mm x 1.0mm x 1.48mm and can be soldered in a few different ways: flat against a PCB, reverse mount using t...
Cool White LED Ring Light with USB Cable and On/Off Switch - 70mm Diameter 5V
·
A 70 mm diameter cool white LED ring light with a built-in USB cable and on/off switch. No soldering or wiring required — plug into any 5V USB power source, flip the switch, and it lights up. The slim, compact ring is bright enough for photo/video lighting, costuming, or project illumination. Th...
NeoPixel Addressable RGB LEDs - Slim Round 3.2mm x 1.0mm 10 pack
·
These incredibly small surface-mount NeoPixel LEDs measure just 3.2 × 1.0 × 1.48mm, making them perfect for projects where space is at a premium. Each LED contains red, green, and blue elements with a built-in driver chip that provides ~12 mA constant current drive — no external resistors needed....
Single-Ended nOOds 128mm Flexible LED Filament - Ice Blue 3V
·
Add a slim, flexible line of ice blue light to props, miniatures and maker projects with this LED filament from Adafruit's nOOds range. It is made from dozens of micro LEDs bonded to an ultra-flexible metal backing and protected with colourful silicone.These filaments are commonly used for Edison...
Sunken USB Type-C Breakout Board
·
This compact breakout is made for slim USB-C projects where a standard horizontal or vertical connector would sit too high. Its sunken Type-C connector straddles the PCBA, helping keep your build low profile while still breaking out the contacts you need.USB-C gives you a reversible connector, ex...
Flexible LED Filament 3V 260mm Red - 5 Pack
·
This flexible LED filament is a slim, bendable light strip-style chip for DIY lighting projects, decorative effects and custom bulb-style builds. It measures 260mm long with a 2mm diameter, making it easy to fit into small creative enclosures and illuminated shapes.The filament runs from a 3V pow...
Qwiic Alphanumeric Display - Blue
·
Show numbers, letters, characters and symbols in bright blue with this compact four-character alphanumeric display. Each digit uses fourteen segments, giving you far more flexibility than a standard seven-segment display.It connects through the SparkFun Qwiic system, so setup is simple: plug in a...
Adafruit Triple LED Matrix Bonnet for Raspberry Pi HUB75
·
Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the active3 pinout, so it can handle roughly three times as many panels or pixels as...
Lithium Ion Cylindrical Battery - 3.7v 2200mAh
·
A 3.7V 2,200 mAh lithium-ion cylindrical battery with built-in protection circuitry for over-voltage, under-voltage, and over-current protection. Slim enough to fit into many project enclosures and includes a JST 2-pin cable with a genuine JST connector for smooth, snag-free connections. The bat...
64x32 RGB LED Matrix Panel (4mm pitch)
The 64×32 RGB LED Matrix Panel with 4mm pitch from DFRobot features 2048 full-colour RGB LEDs, each independently controllable. With its slim 11mm profile and durable construction, this panel is suitable for both indoor and outdoor use in harsh environments. The panel features two IDC connectors...
Adafruit PiTFT - 320x240 2.8 TFT+Touchscreen for Raspberry Pi
·
The Adafruit PiTFT 2.8" is a colour touchscreen display designed for the Raspberry Pi. Featuring a 2.8-inch 320×240 pixel TFT with 16-bit colour and a resistive touch overlay, it works as a mini console, X Window display, image viewer, or video player — all driven over the Pi's high-speed SPI int...
Full Size Wireless Keyboard with Trackpad
·
A full-size wireless keyboard with slim chiclet keys and an integrated trackpad on the right-hand side. The trackpad supports both left and right clicks, eliminating the need for a separate mouse. At just 7 mm thick, it is lightweight and portable — ideal for use with Raspberry Pi, BeagleBone, or...
64x64 RGB LED Matrix Panel (3mm pitch)
The 64×64 RGB LED Matrix Panel with 3mm pitch from DFRobot features 4096 full-colour RGB LEDs, each independently controllable. With its slim 11mm profile, high brightness, and durable construction, this panel is suitable for both indoor and outdoor use in harsh environments. The panel features ...
Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM
·
The Adafruit Perma-Proto HAT for Pi Mini Kit is a full-sized prototyping daughter board for any Raspberry Pi with a 2×20 GPIO header (Pi Zero, A+, B+, Pi 2, 3, 4, 5). It provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern — making it easy to transfer circuits from a...
GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header
·
A short-profile 2×20 female through-hole header for connecting Raspberry Pi HATs with minimal height above the board. This custom header provides a slimmer fit than standard-height GPIO headers, ideal for compact enclosures and low-profile builds. Compatible with any Raspberry Pi model featuring...