All Products

SKU: LB-PCB-PAPER

This PCB provides positive (+) and negative (−) connections for a paper circuit project. It is supplied as the board only.Large holes let you sew thread onto the board, giving you a way to incorporate it into a project.

SKU: DF-DFR1247 · MPN: DFR1247

This smart UPS expansion board adds battery-backed power management to the LattePanda IOTA, giving portable and embedded builds a laptop-like uninterruptible power supply. It uses the standard HID-UPS protocol, so Windows 10 and Windows 11 can recognise it as a battery device without drivers or c...

SKU: DF-DFR1250 · MPN: DFR1250

Introduction The LattePanda IOTA M.2 M-Key Expansion Board is a dedicated interface adapter designed to unlock the full potential of the LattePanda IOTA single-board computer . It functions by converting the board's native 16-pin FPC PCIe interface into a universally recognized M.2 M-Key slot. Th...

SKU: YH-6000300962

This new Micro:bit cute silicone case is compatible with Micro:bit V1 and V2 board. All holes are specially designed for the 2nd-generation Micro:bit board, which does not affect speaker, touch logos and microphone. There are four colors for choice, each one looks wonderful. We also designed a th...

SKU: YH-6000300963

This new Micro:bit cute silicone case is compatible with Micro:bit V1 and V2 board. All holes are specially designed for the 2nd-generation Micro:bit board, which does not affect speaker, touch logos and microphone. There are four colors for choice, each one looks wonderful. We also designed a th...

SKU: YH-6000300964

This new Micro:bit cute silicone case is compatible with Micro:bit V1 and V2 board. All holes are specially designed for the 2nd-generation Micro:bit board, which does not affect speaker, touch logos and microphone. There are four colors for choice, each one looks wonderful. We also designed a...

SKU: AF-1751 · MPN: 1751

This 9.7" IPS TFT display module is the same ultra-high pixel density retina panel found in iPad 3 and 4 tablets. With a 2048×1536 resolution, it delivers incredibly sharp visuals for custom monitor builds and embedded display projects. This listing is for the bare display panel only — no driver...

SKU: AF-790 · MPN: 790

A high-sensitivity GPS module built around the MTK3339 chipset, capable of tracking up to 22 satellites on 66 channels with 10 Hz position updates. At just 16 × 16 × 5 mm and under 6 grams, it packs an internal patch antenna, built-in datalogging, and ultra-low power consumption into a tiny footp...

SKU: AF-2858 · MPN: 2858

Be the belle of the ball with the NeoPixel Jewel! These NeoPixel Jewels now have 4 LEDs in them (red, green, blue, and white) for excellent lighting effects. This is the Warm White RGBW version. We also have this jewel in Natural White, Cool White, and good ole RGB! The NeoPixel is...

SKU: AF-2859 · MPN: 2859

Be the belle of the ball with the NeoPixel Jewel! These NeoPixel Jewels now have 4 LEDs in them (red, green, blue, and white) for excellent lighting effects. This is the Natural White RGBW version. We also have this jewel in Warm White, Cool White, and good ole RGB! The NeoPixel is...

SKU: AF-2860 · MPN: 2860

Be the belle of the ball with the NeoPixel Jewel! These NeoPixel Jewels now have 4 LEDs in them (red, green, blue, and white) for excellent lighting effects. This is the Cool White RGBW version. We also have this jewel in Natural White, Warm White, and good ole RGB! The NeoPixel i...

SKU: AF-4238 · MPN: 4238

Protect your Adafruit PyGamer with this laser-cut acrylic enclosure kit. The minimalist design showcases the board while shielding it from bumps, spills, and everyday wear. The kit includes smoke and clear acrylic panels with black nylon hardware for a clean, professional look. Assembly is strai...

SKU: PL-4760 · MPN: 4760

This kit includes two dual-channel Hall Effect sensor boards and two 6-pole magnetic discs that can be used to add quadrature encoding to two micro metal gearmotors with extended back shafts (motors and cables are not included with this kit). The encoder board senses the rotation of the magnetic ...

SKU: AF-4424 · MPN: 4424

A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the two connector ecosystems. Both connectors have a latching feel for secure conn...

SKU: AF-5001 · MPN: 5001

The ANO Directional Navigation and Scroll Wheel Rotary Encoder combines a 5-way directional button pad with a rotary scroll wheel in a single, intuitive interface element. Inspired by classic click-wheel navigation, it provides a familiar and satisfying input experience for your projects. This p...

SKU: AF-4534 · MPN: 4534

The Bonsai Buckaroo is a compact add-on board for micro:bit and Adafruit CLUE that turns your board into a plant care monitoring and watering system. Bolt it on with 5 screws to get a buzzer, motor driver, and soil moisture sensing breakout. Connect two alligator clips and nails to measure soil ...

SKU: AF-5186 · MPN: 5186

The Ultimate GPS Module (PA1616D) is a high-sensitivity, 66-channel GNSS module built around the MTK3333 chipset. Weighing under 6 grams and measuring just 16 × 16 × 6.4 mm, it packs impressive performance into an incredibly small package — perfect for integrating GPS into custom projects and PCB...

SKU: PR-PIM618

A compact 4 channel motor+encoder controller, powered by RP2040. It has RGB and per-motor indicator LEDs plus built in voltage and current sensing. Motor 2040 is a standalone motor controller for driving motors with encoders attached. Encoder motors can provide feedback to the controller, enabli...

SKU: AF-5745

The Adafruit PiCowbell DVI Output for Pico lets you drive an HDMI monitor or television directly from a Raspberry Pi Pico or Pico W. It features a mini HDMI connector and outputs DVI-compatible digital video — just plug in a standard mini-HDMI-to-HDMI cable and start displaying graphics. Note tha...

SKU: AF-6054 · MPN: ADA6054

The Feather Mount for LEGO-Compatible Brick Systems lets you securely attach any standard-sized Feather or FeatherWing board (2" × 0.9" / 51 mm × 23 mm) to LEGO-compatible brick plates. No hot glue, epoxy, or tape needed — the mount snaps directly onto brick baseplates for a clean, secure build. ...