All Products

SKU: IT-IM120628019

OverviewThe ProtoShield mates with the Arduino USB board and gives the user a small soldering area, two general LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and most important of all - the Arduino reset switch is brought to the top level.Features All Arduino pins are brought t...

SKU: SF-COM-30227 · MPN: COM-30227

The RV-1805-C3 is an ultra-low-power real-time clock module built for efficient, reliable timekeeping in battery-powered electronics. It integrates the crystal (XTAL) directly into a hermetically sealed ceramic package, removing the need for external clock tuning.With a maximum timekeeping curren...

SKU: DF-DFR0535-1 · MPN: DFR0535-1

Build a compact off-grid power supply for embedded electronics, IoT nodes and low-power projects with this solar power management kit from DFRobot. It combines a Solar Power Manager board for 9V/12V/18V panels with a compact 9V 220mA solar panel.The controller integrates constant-voltage MPPT sol...

SKU: DF-SEN0715 · MPN: SEN0715

This compact capacitive sensor detects the presence or level of liquid through non-metallic container walls, so it does not need to touch the liquid. That helps avoid corrosion, contamination and media adhesion when monitoring aggressive liquids such as strong acids, alkalis and toxic liquids in ...

SKU: DF-SEN0716 · MPN: SEN0716

This industrial non-contact liquid level sensor uses capacitive sensing to detect liquid through non-metallic container walls, so it does not need to touch corrosive, viscous or contaminated liquids. It is suited to liquids such as milk, honey, latex, blood, engine oil and acid or alkaline soluti...

SKU: DF-SEN0656 · MPN: SEN0656

The CT1780 is a cold-junction compensated amplifier for K-Type thermocouples, designed to make extreme temperature measurement easier to add to microcontroller projects. It digitises the tiny thermocouple signal and provides temperature readings with 0.25℃ resolution over a very wide measurement ...

SKU: DF-SEN0204

A non-contact liquid level sensor that detects the presence of liquid through a container wall — no direct contact with the liquid required. Using advanced signal processing via the XKC-Y25-T12V chip, it works through most non-metallic containers including plastic, glass, and ceramic. This makes...

SKU: AF-746 · MPN: 746

The Adafruit Ultimate GPS Breakout (Version 3) is a high-performance GPS module built around the MTK3339 chipset. With 66 channels, -165 dBm tracking sensitivity, and up to 10 Hz position updates, it delivers accurate and responsive location data for a wide range of projects. Version 3 introduce...

SKU: AF-3133 · MPN: 3133

The Adafruit Ultimate GPS FeatherWing brings precise, low-power GPS to the Feather ecosystem. Built around the MTK3339 chipset, it tracks up to 22 satellites on 66 channels with -165 dBm sensitivity and delivers up to 10 position updates per second — all while drawing only 20 mA. Simply plug the...

SKU: DF-TEL0083-A

This GPS Receiver is Discontinued Now, We recommend other best selling GPS Sensor as a suitable replacement. GPS receivers can be easily found in daily life, such as smartphones, cars, and tablets. They are used to track the loaction all over the globe. This GPS Receiver for A...

SKU: DF-DFR0191

The DFRobot Mega 2560 V3.0 is a fully compatible Arduino Mega 2560 R3 microcontroller board based on the ATmega2560. It features 54 digital I/O pins (14 with PWM), 16 analog inputs, 4 hardware serial ports, and a 16 MHz crystal oscillator. Connect via USB or power with a 7–12 V adapter or battery...

SKU: SF-COM-00589

The ‘must have’ IC for 3V projects. This is the RS232 converter IC that is capable of running at 3V and communicating with 3V logic. Comes in an easy to solder 16-Pin SOIC SMD package. Requires four external 0.1uF ceramic capacitors - no more 10uF monsters! Operates from 2.7V to 6V.

SKU: AF-2975 · MPN: 2975

The ultimate companion kit for anyone learning electronics. The Adafruit Parts Pal packs LEDs, resistors, capacitors, transistors, sensors, switches, and prototyping essentials into a handy storage box — everything you need to dive into breadboard projects right away. Pair it with an Arduino, Ra...

SKU: MK-HFX888D-21BY

Details Digital model in an analog-model price bracket Features adjustment mode, preset mode, and password function Separable tip/heater design provides excellent value for money Hakko FX-888D Features Excellent thermal recovery - Heater output has been increased by 30% compared to that of ...

SKU: TB-RN3436

A 1 kΩ NTC (negative temperature coefficient) thermistor in a 5 mm radial dipped-epoxy package. The resistance decreases as temperature increases, making it suitable for temperature sensing, thermal compensation, and monitoring applications. Rugged ceramic construction with tinned copper leads fo...

SKU: TB-RN3444

A 100 kΩ NTC (Negative Temperature Coefficient) thermistor in a radial dipped-epoxy package. These ceramic sensors change resistance rapidly with temperature, making them ideal for temperature measurement, compensation, and thermal protection circuits. Key Features NTC Ceramic Construction – R...

SKU: TB-RN3442

A 47 kΩ NTC (Negative Temperature Coefficient) thermistor in a compact 5 mm radial package. NTC thermistors decrease in resistance as temperature rises, making them ideal for temperature sensing, thermal protection, and compensation circuits. Dipped in epoxy for durability, this through-hole com...

SKU: EC-ACK02124K

A comprehensive beginner kit for learning Arduino, electronics fundamentals, and basic programming. The kit includes a printed guide book with 13 step-by-step experiments covering LEDs, buttons, sensors, displays, and more — all with wiring diagrams, code examples, and clear explanations. All co...

SKU: TB-TS1430

This high quality soldering iron is made in Japan by Goot. Goot is a famous brand throughout the world, but virtually unknown in Australia and New Zealand, until now. We will bring you more Goot products in the future. This soldering iron offers exceptional heat recovery. The ceramic heat...

SKU: SF-GPS-14987

This tri-band GNSS antenna is ideal for GPS L1, GLONASS L1, and Beidou B2 reception. At 45x45mm it is a large ceramic antenna with an incredible 38dB LNA gain.This antenna works well with the GPS-RTK providing reception of Beidou satellites where other more basic GPS antennas cannot. We’ve chosen...