All Products

SKU: DF-DFR0868

The Beetle ESP32-C3 is a coin-sized IoT development board based on the ESP32-C3 RISC-V 32-bit single-core processor. Measuring just 25 × 20.5 mm, it breaks out up to 13 GPIO pins and integrates lithium battery charging management on-board — connect a Li-ion battery directly without extra charging...

SKU: SF-WRL-19899

The ESP32-WROOM-DA, which is a module that achieves high-quality, wireless connectivity across large areas, using two complementary PCB antennas in different directions. Also, based on its industry-leading technical specifications, the co-existence of WiFi and Bluetooth® (Classic & Low-Energy)...

SKU: DF-TEM2022B-EN-1

An all-in-one IoT starter kit built around the FireBeetle 2 ESP32-E, designed by Hackster and DFRobot for learning IoT development with Arduino. The kit includes sensors, actuators, an audio player with speaker, and an I/O shield — everything needed to build connected projects right out of the bo...

SKU: DF-TEM2022C-EN-1

The Hackster and DFRobot EEDU Environmental Sensor Kit provides everything you need to get started with IoT environmental monitoring using an ESP32-based FireBeetle board. Build practical projects that monitor soil moisture, air quality, and environmental conditions in real time. The kit centres...

SKU: EC-DIS01835A-3

The CrowPanel Advance 3.5" is a Meshtastic-ready HMI touchscreen display powered by an ESP32-S3 with an onboard SX1262 LoRa module. It features a 480 × 320 IPS capacitive touch panel, integrated AI voice interaction via microphone and speaker, and a replaceable wireless module design for flexible...

SKU: KS-FB0001

 The FoxBit is a versatile development board built around the powerful ESP32-D0WDQ6 dual-core microcontroller, designed for education, makers, and electronics enthusiasts. Ideal for IoT, STEAM education, smart control, and DIY projects, the FoxBit combines high performance with low power co...

SKU: KS-KS5027

Build your own AI chatbot on a breadboard with this DIY starter kit based on the ESP32-S3. Featuring a MEMS microphone for voice input, a digital amplifier with speaker for audio output, and a 1.54" display, the kit provides everything you need to prototype a voice-interactive AI assistant — no s...

SKU: DF-DRI0058 · MPN: DRI0058

This compact DFRobot driver board is made for precise control of brushless DC motors using Field-Oriented Control (FOC). At just 26 x 21.5mm, it is well suited to tight builds where smooth motion, low noise and responsive control matter.SimpleFOCmini supports closed-loop control of motor position...

SKU: DF-SEN0691 · MPN: SEN0691

The Fermion C4002 is a 24GHz FMCW mmWave radar module designed for true human presence detection, including motion, stationary people and micro-movements such as breathing or chest expansion. It is aimed at smarter automation than traditional PIR sensors, which can miss occupants who are sitting ...

SKU: SF-WRL-30414 · MPN: WRL-30414

Turn a wired UART link into a dependable short-range Bluetooth® serial connection for microcontrollers, computers and mobile devices. It pairs, connects and passes data between TX and RX lines, buffering serial streams for byte-perfect delivery between radios.This JST version swaps the usual pins...

SKU: SF-WRL-15663 · MPN: WRL-15663

Built around Espressif's ESP32-WROOM module, this Feather-compatible development board is a handy starting point for WiFi, Bluetooth and battery-powered IoT projects. The dual-core Xtensa 32-bit LX6 processor runs at up to 240MHz, with 16MB of embedded flash and 520KB of internal SRAM on hand for...

SKU: DF-TEL0168 · MPN: TEL0168

Turn regular 3.3V sensors into wireless BLE sensor nodes with this 5 pack of Fermion BLE Sensor Beacons from DFRobot. Each beacon broadcasts data using Bluetooth Low Energy, so nearby BLE-capable devices such as smartphones and ESP32 boards can scan and receive the data without pairing.The Fermio...

SKU: DF-TEL0190 · MPN: TEL0190

RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...

SKU: DF-SEN0678 · MPN: SEN0678

This Gravity air quality module uses Sensirion’s STCC4 gas sensing chip to directly measure carbon dioxide with the thermal conductivity measurement principle. It is designed for compact, cost-effective indoor monitoring nodes where stable CO₂ readings are needed without complex hardware integrat...

SKU: AF-5633 · MPN: ADA5633

This breakout makes it much easier to prototype with external QSPI flash memory on modern microcontrollers such as the RP2040, ESP32, RT10xx and STM32 families. It adapts a wide 8-SOIC flash package to a neat 0.3" wide DIP format, so you can plug it into a breadboard, try different flash sizes, o...

SKU: AF-5632 · MPN: ADA5632

This breakout makes it much easier to prototype with external QSPI flash on modern microcontroller platforms such as RP2040, ESP32, RT10xx and STM32 designs. It converts a wide 8-SOIC flash package into a breadboard-friendly 0.3" wide DIP format, which is handy when you want to test different fla...

SKU: AF-4919

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth support, and dual 240 MHz cores. Now get ready to take your IoT designs to the ...

SKU: AF-5885 · MPN: ADA5885

The Adafruit ESP32-S3 Feather with w.FL Antenna features the dual-core ESP32-S3 with Wi-Fi, Bluetooth LE, and native USB in the Feather form factor, plus a w.FL (MHF3/IPEX3) connector for attaching an external 2.4 GHz antenna. This makes it ideal for enclosed installations or when you need improv...

SKU: AF-5933 · MPN: ADA5933

The Adafruit ESP32-C6 Feather is built around Espressif's first Wi-Fi 6 SoC, combining 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), and 802.15.4 (Zigbee/Thread) in a single chip. The addition of 802.15.4 support makes it well-suited for Matter development and smart home applications. This Feather includes...

SKU: AF-5973 · MPN: ADA5973

The Adafruit CH9328 UART to HID Keyboard Breakout lets any microcontroller or single-board computer emulate a USB keyboard — even without native USB support. Simply send ASCII characters or raw HID reports over a 9600-baud serial connection, and the CH9328 converts them into real keypresses on th...