All Products

SKU: DF-FIT0798

An M.2 (A+E Key) to Gigabit Ethernet adapter module designed for the LattePanda Alpha and Delta. Built around the Realtek RTL8111F controller, this module adds an RJ45 Gigabit Ethernet port via the M.2 slot, providing 10/100/1000 Mbps self-adaptive networking with low power consumption. Plug-and...

SKU: DF-FIT0771

Note: This M.2（A+E Key）to SATA3.0 Expansion Card is not compatible with LattePanda V1.This is an M.2 (A+E Key) to SATA3.0 two-port adapter expansion card that can transfer out 2 SATA ports through the M.2 (A+E Key) slot of the PC host. LattePanda Delta/Alpha users can connect two S...

SKU: DF-FIT1005 · MPN: FIT1005

The M.2 2.5G Network Card adds high-speed Ethernet connectivity to devices with an M.2 B+M Key slot. Powered by the Intel I225-V chipset, it supports adaptive data rates up to 2500 Mbps and is compatible with LattePanda Alpha, LattePanda 3 Delta, LattePanda Sigma, and other M.2-equipped single-bo...

SKU: DF-FIT1007 · MPN: FIT1007

##Introduction The M.2 to 5G Ethernet Network Card is an advanced networking solution designed to upgrade network connectivity by converting an M.2 B+M Key slot into a high-speed 5G Ethernet RJ45 port. Powered by the RTL8126 chipset, this network card supports adaptive data rates of up to 5Gbps, ...

SKU: DF-FIT1004 · MPN: FIT1004

An M.2 E Key wireless network card based on the Intel BE200 chipset, supporting WiFi 7 (IEEE 802.11be) with triple-band connectivity and Bluetooth 5.4. It delivers maximum wireless speeds of up to 8,774 Mbps across 2.4 GHz, 5.8 GHz, and 6 GHz bands, making it suitable for upgrading laptops, deskt...

SKU: LB-LS2429

Totalling 1080 pieces, this Stainless Steel Screws and Nuts Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! These screws will fit almost all electronic boards and modules mounting holes. Set contains the fo...

SKU: DF-FIT0973 · MPN: FIT0973

##Introduction This is an M.2 M Key to PCIe3.0x16 graphics card extension cable specially prepared for LattePanda Sigma users. It has a PCIex16 card slot, a differential signal hole-free design, and no signal attenuation and interference problems in parasitic capacitance and parasitic inductance....

SKU: DF-FIT0971 · MPN: FIT0971

##Introduction This is an M.2 M Key to 4-way PCIe expansion board specially prepared for LattePanda Sigma users. It effectively solves the problem of insufficient PCIe interfaces. It is driver-free and plug-and-play. It can be used with the Sigma motherboard to expand 4 channels of PCIe interface...

SKU: DF-FIT0970 · MPN: FIT0970

##Introduction This is an M.2 M Key to SATA3.0 expansion board specially prepared for LattePanda Sigma users. it requires no driver installation and is plug and play. It has high-speed transmission and stable performance. SATA3.0 interface can be utilized for connecting SATA devices, such as opti...

SKU: LB-PT-M38

A compact Bluetooth 4.2 audio receiver module (MH-M18) that streams two-channel stereo audio wirelessly from your phone, tablet, or other Bluetooth device. Once paired, it delivers lossless audio playback with a connection range of up to 20 metres in open environments. The module supports button...

SKU: SF-PRT-21232

This is an M3 hex nut. For use with M3 screws.

SKU: LB-LS0513

M3 Nylon Screw Black Hex Screw Nut Nylon PCB Standoff Assortment Kit 250pcs M3*6+6mm        25pcs M3*8+6mm        25pcs M3*10+6mm      25pcs M3*12+6mm      25pcs M3*15+6mm &n...

SKU: M5-A051

M5:bit It is an M5Core-to-Microbit serial communication converter/adapter board.The adapter board connects the Microbit Uart port to the GROVE port on M5core,which realized the function of serial communication between M5Core and Microbit.More IO pins are extended, you can used DuPont Cable t...

SKU: M5-K021

Description FLIR features the latest FLIR Lepton 3.0 longwave-infrared (LWIR) camera core, get two times the resolution and 4x the pixels of the previous 2.x generation FLIR is covered by a 3D printing case, makes it a perfect functional bottom for non-contact temperature measurement, co...

SKU: M5-A014

Description M5GO BOTTOM is apparently the bottom part of M5GO which is a upgrade of basic bottoms, with a larger battery, LOGO-compatilble holes, MICPHONE, LED Bar , two more GROVE PORT，and more. M5GO BOTTOM is the same Bottom of M5GO Lite, M5GO IoT Kit and M5Fire...

SKU: AF-4497

The ATOM Matrix, at only 24 x 24mm, is the most compact development board in the M5Stack development kit series. The fits-in-your-change-pocket size computer contains a ESP32-PICO-D4 chip, which comes integrated with WiFi, Bluetooth, and 4MB of integrated SPI flash memory. All this along with its...

SKU: AF-5966 · MPN: ADA5966

Add a cool touch-screen rotary dial to your next build with the M5Stack M5Dial. The M5Dial integrates the necessary features and sensors for various smart home control applications as a versatile embedded development board. It features a 1.28-inch round TFT touchscreen, rotary encoder, RFID detec...

SKU: M5-M028

DescriptionThis is a wireless communication module, integrated an NB-IoT M5311 module that produced by China Mobile. The dimension if M5311 is 16mm * 18mm*2.2mm, which is very tiny, and gives convenience to the user of more flexible dimension requirement.package with LCC allows quick product...

SKU: M5-A071

This is a T-shape connector for RS485 communication, which can apply to point to point, one point to multi-point connection. A POWER LED for indication. The terminal connector specification is 4pin HT3.96. Many M5 products have the same type of connector, such as PLC, Base26, HAT-RS485, etc.Produ...

SKU: M5-U069

Description ADC_HAT is another type of C-HAT specifically design for M5StickC controller. Same as ADC unit, this is an ADC converter component for stickc. Packed with an ADC converter chip ADS1100, which is a fully differential, 16-bit, self-calibrating, delta-sigma A/D converter. Extremely easy ...