All Products
Showing 41-60 of 100 products
Adafruit Raspberry Pi Camera Board Case with 1/4 Tripod Mount
·
The Adafruit Raspberry Pi Camera Board Case is a compact two-piece polycarbonate enclosure that protects your Pi Camera while providing a 1/4" tripod mount on the back. Designed by Mike Doell, it snaps together without screws and features a sleek black base with a clear top. The case includes a ...
Jumper Wires Premium 6 Mixed Pack of 100
A mixed pack of 100 premium jumper wires in assorted colours, ideal for breadboard prototyping and connecting to 0.1″ headers. The pack includes 50 male-to-male and 50 female-to-female wires, each 155 mm (6″) long. The slim connector housings allow multiple jumpers to be installed side by side o...
40-pin FPC to Right Angle 2x20 IDC Male Plug Header Adapter
·
A 40-pin FPC to right-angle 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT...
Adafruit EYESPI Pi Beret - Buttons, EYESPI and STEMMA QT
The EYESPI Pi Beret is a slim HAT for Raspberry Pi that provides an EYESPI display connector, STEMMA QT port, buttons, and a slide switch — everything you need to add a colour TFT or E-Ink display and sensors to your Pi without counting pins or fiddling with breakout boards. The EYESPI standard ...
Pibow 3 B+ Coupé (Raspberry Pi 3 B+, 3, 2) - Coupé Red
The Pibow Coupé is a slim, open-top acrylic case for the Raspberry Pi, designed for easy access to GPIO pins and HAT compatibility. The Coupé Red version features vibrant red layers with transparent top and base, keeping your Pi visible inside. Crafted from five laser-cut layers of high-quality ...
White LED Backlight Module - Medium 23mm x 75mm
·
A diffused white LED backlight strip in a 3.5 mm thick acrylic enclosure. Normally found behind LCDs, this module uses a single white LED with a specially designed acrylic diffuser to provide near-uniform illumination across the entire surface. A reflector on the back directs all light forward fo...
Smoke Snap-on Case for micro:bit V2
·
This simple Smoke Snap-on Case is both good looking and tough enough to toss into your bookbag or toolbox. It has slim cut-outs for your cable, speaker, battery. It's darkened plastic but you can still easily see the LEDs shining through. The bottom section is open so you can plug it in...
Translucent Snap-on Case for micro:bit V2
·
This simple Translucent Snap-on Case is both good looking and tough enough to toss into your bookbag or toolbox. It has slim cut-outs for your cable, speaker, and battery. It's translucent plastic so you can still easily see the micro:bit PCB markings and LEDs shining through. The bo...
7-Inch DSI Capacitive Touchscreen – 1280x720, IPS, 10-Point Multi-Touch, Anti-Fingerprint
·
This 7" DSI capacitive touchscreen from Waveshare features a 1280×720 IPS panel with 10-point multi-touch, toughened glass with optical bonding, and an anti-fingerprint coating. The integrated driver circuitry connects via a single FPC cable, resulting in a slim 9.3 mm total thickness. Compatibl...
Slim Right-Angle USB-C to USB-C Cable - 23mm
·
This short USB-C cable is designed for tight builds where a normal straight connector takes up too much space. The slim right-angle plugs and flexible ribbon-style cable make it handy for compact connections inside enclosures.The cable has USB-C plugs on both ends and, in this version, the plugs ...
Slim Right-Angle USB-C to USB-C Cable 75mm – Opposite Plugs
·
This short USB-C cable is made for tidy, compact connections where a standard cable would take up too much space. It is well suited to linking USB-C devices inside an enclosure or anywhere you need a low-profile cable run.The right-angle metal plugs are durable and easy to grip for plugging and u...
Mini Aluminum Heat Sink for Raspberry Pi - 13 x 13 x 3mm
·
Looking for an ultra-thin heat sink for your Raspberry Pi 3? Check out this nice and slim 13x13x3mm Heat Sink! This heat sink is made from high quality aluminum and will work perfectly with any Raspberry Pi but is best paired with a Raspberry Pi 3 since it can run a little hot....
Lithium Ion Polymer Battery with Short Cable - 3.7V 350mAh
·
A compact 3.7 V 350 mAh lithium-ion polymer (LiPo) battery with a short cable and genuine 2-pin JST-PH connector. The slim, lightweight form factor makes it ideal for wearables, IoT devices, and portable electronics projects. The battery includes built-in protection circuitry that guards against...
Pibow 3 A+ Coupé (for Raspberry Pi 3 A+) - Coupé Rainbow
The Pibow 3 A+ Coupé in Rainbow is a slim, colourful case designed specifically for the Raspberry Pi 3 A+. Crafted from five layers of laser-cut, high-quality cast acrylic, it securely houses your Pi while leaving all ports, camera connector, display connector, and GPIO fully accessible. With a ...
Waterproof 3m Mini USB Endoscope Inspection Camera 7mm Lens
This USB endoscope inspection camera is a practical tool for looking into hard-to-reach spaces during repairs, maintenance and troubleshooting. Its slim 7mm camera head and flexible waterproof cable make it useful for damp or confined areas such as pipes, engine bays, wall cavities and machinery....
36-pin 0.1 Short Female Header - Pack of 5
·
Short female headers designed for tight spaces where standard-height headers won't fit. At just 5mm tall (compared to the standard 8mm), these low-profile headers are ideal for compact builds and slim assemblies. Each header strip is 36 pins long with standard 0.1" (2.54mm) pitch, compatible wit...
Pibow 3 B+ Coupé (Raspberry Pi 3 B+, 3, 2) - Coupé Royale
The Pibow Coupé Royale is a slim, colourful, layered acrylic case for the Raspberry Pi 3 B+, 3, and 2. Five laser-cut layers of high-quality cast acrylic stack together to securely enclose your Pi while leaving all ports, the camera connector, display connector, and GPIO fully accessible. The tr...
36-pin 0.1 Short Break-away Male Header - Pack of 10
·
Short break-away male headers in a convenient pack of ten — ideal for low-profile connections where standard-height male headers would be too tall. These headers are designed to pair with short female headers for a slim, compact fit. Each header strip is 36 pins long with standard 0.1" (2.54mm) ...
USB DIY Slim Connector Shell - A-M Plug
·
Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY USB-A Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a mode...
12V Flexible LED Strip (120 LEDs) - Yellow
An ultra-thin flexible LED strip in yellow, measuring just 2.5 mm wide and 1 mm thick. With 120 SMD 0805 LEDs per metre, this 1-metre strip runs on 12V DC and can be cut every 3 LEDs to fit your exact length requirements. The incredibly slim profile makes this strip ideal for lighting in tight s...