All Products

SKU: AF-1404 · MPN: ADA1404

This standard-size hobby servo adds a handy fourth white wire that brings out the internal potentiometer wiper. Connect it to an analogue input on a board such as an Arduino to read the servo’s position as a voltage while still driving the servo as normal.That feedback signal can be useful in rob...

SKU: AF-6379 · MPN: ADA6379

Measuring stretch and movement can be tricky, and this conductive rubber cord gives you a simple, hands-on way to do it. The cord is made from carbon-black impregnated rubber, with resistance that increases as it is pulled longer.In its relaxed state the cord is around 350 ohms per inch, and as i...

SKU: AF-6064 · MPN: ADA6064

Need approximate distance sensing over tens of centimetres to around a metre, plus ambient light measurement from the same board? This breakout carries Vishay’s VCNL4200, a two-in-one IR proximity and ambient light sensor suited to robotics, motion detection and object sensing projects.The proxim...

SKU: DF-DRI0057 · MPN: DRI0057

This compact motion control board is designed to coordinate ST and SC series serial bus servos in robotics projects, with support for up to 253 servos on a single bus network. It combines power distribution, command transmission and telemetry feedback for multi-axis builds such as robotic arms, w...

SKU: DF-DFR0372 · MPN: DFR0372

This control board is designed for the DreamMaker Overlord 3D Printer, acting as the central controller for analysing sensor data and driving the actuators needed to complete the printing process.It is based on the Arduino Mega2560, providing plenty of GPIO resources for structure and motion-cont...

SKU: SF-SEN-29529 · MPN: SEN-29529

This ultra-small Qwiic-enabled breakout adds three-axis acceleration sensing to compact projects using the LIS3DH, a smart, low-power capacitive micro-machined accelerometer with 12-bit resolution. It can be used for translation detection and is classified as a 3DoF, or 3 Degrees of Freedom, sens...

SKU: SF-SEN-29468 · MPN: SEN-29468

This Red Vision breakout brings the Himax HM01B0 colour camera module out to maker-friendly connections for robotics, embedded vision and camera experiments. The module provides a 320 x 320 pixel array with I2C control and a configurable parallel video data interface.The board breaks all pins fro...

SKU: AF-4503 · MPN: ADA4503

Add motion and orientation sensing to your project with this compact 6 Degree of Freedom IMU breakout built around the ST LSM6DS3TR-C. It combines a 3-axis accelerometer for measuring gravity and acceleration with a 3-axis gyroscope for measuring spin and twist.The breakout includes voltage regul...

SKU: SF-SEN-27314 · MPN: SEN-27314

SpectraFlex is a flexible bend sensor for measuring angular deflection in research, industrial and personal electronics projects. As the sensor bends, its resistance changes, making it suitable for reading movement or flex through a simple analogue circuit.This 95mm version includes male pins for...

SKU: SF-SEN-20659 · MPN: SEN-20659

Add 3-axis motion sensing to your project with this LIS3DH accelerometer breakout from SparkFun. The LIS3DH is a low-power, capacitive micro-machined accelerometer with 12 bits of resolution, suitable for detecting translation, movement and orientation in 3DoF applications.The breakout is easy to...

SKU: SF-SEN-16826 · MPN: SEN-16826

Bring 60GHz radar sensing into your project with the Acconeer A111 single-chip pulsed coherent radar sensor on a SparkFun breakout board. It is suited to high-precision distance measurement, and also supports gesture, motion, material and speed-detection applications at distances up to two metres...

SKU: SF-TOL-19753 · MPN: TOL-19753

BitRunner lets Carbide Motion control power to your CNC router, so you do not need to reach for the router switch at the end of each program or whenever a tool change is required.This V2 Standard version includes a lockout pendant, allowing you to manually disable the router during bit changes fo...

SKU: SF-TOL-19752 · MPN: TOL-19752

BitRunner lets Carbide Motion control power to your CNC router, so you do not need to reach for the router’s power switch when a program ends or a tool change is required.This V2 Deluxe version adds a lockout pendant, allowing you to manually disable the router during bit changes for additional s...

SKU: SF-SEN-29528 · MPN: SEN-29528

Add motion sensing to your project with this Qwiic-enabled LIS3DH breakout. The LIS3DH is a smart, low-power, three-axis capacitive micro-machined accelerometer with 12-bit resolution, suited to translation, motion, orientation and tap detection.This board is classified as a 3DoF, or 3 Degrees of...

SKU: AF-163

A precision triple-axis accelerometer breakout featuring the Analog Devices ADXL335. With a ±3 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for tilt sensing, motion detection, and orientation measurement in general-purpose applications. The onboard 3.3V regul...

SKU: AF-613

Built for projects that need an outdoor-ready camera, this module combines a metal weatherproof enclosure, mounting hinge and a 1 meter long cable with the TTL serial and NTSC video signals brought out.It outputs NTSC video and can also capture snapshots from that video stream, sending pre-compre...

SKU: DF-SEN0142

A compact breakout board for the MPU-6050, combining a 3-axis gyroscope and 3-axis accelerometer with an onboard Digital Motion Processor (DMP) on a single chip. The integrated DMP handles complex motion fusion algorithms, offloading processing from your microcontroller. The breakout includes a ...

SKU: LB-LR0044

This compact MPU-6050 module combines a MEMS accelerometer and MEMS gyroscope in a single chip for detecting movement, tilt and rotation across the X, Y and Z axes.Each channel is captured with 16-bit analogue-to-digital conversion, allowing the module to read the accelerometer and gyro axes at t...

SKU: LB-SHAKEUP-BOARD

The ShakeUp turns everyday objects into computer inputs. Plug it into your computer via USB and it appears as a standard keyboard and mouse — connect objects using alligator clips, and when the circuit closes, the ShakeUp sends a keystroke or mouse signal. If you can plug in a keyboard, you can u...

SKU: AF-1018

A wide-range triple-axis accelerometer breakout featuring the Analog Devices ADXL326. With a ±16 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for detecting high-impact motion, vibration, and orientation in demanding applications. The onboard 3.3V regulator ac...