All Products
Showing 21-40 of 49 products
ABS Filament 1.75mm, 1Kg Roll - Temperature Change Grey to White
A 1 kg (2.2 lb) reel of 1.75 mm Temperature Change (Grey to White) ABS (acrylonitrile butadiene styrene) filament for 3D printing. This thermochromic filament transitions from grey to white as it warms, creating dynamic, colour-shifting prints that respond to touch, ambient temperature, or warm l...
ABS Filament 1.75mm, 1Kg Roll - Temperature Change Green to Yellow
A 1 kg (2.2 lb) reel of 1.75 mm Temperature Change (Green to Yellow) ABS (acrylonitrile butadiene styrene) filament for 3D printing. This thermochromic filament transitions from green to yellow as it warms, creating dynamic, colour-shifting prints that respond to touch, ambient temperature, or wa...
Rugged Metal Pushbutton - 22mm 6V RGB Momentary
·
By popular demand, we now have rugged metal buttons with a full color RGB LED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair.This is a 22mm Momentary version of the RGB pushbutton. Simply drill a 22mm hole into any material up to 1/4" thick ...
Wind Generator Motor Alternator 0.05-1.5V DC 16.5x16x16mm 1pc
Mini Wind & Water Turbine Generator Looking for a tiny yet effective way to explore renewable energy? This Mini Wind & Water Turbine Generator is a compact, hands-on solution for teaching and experimenting with green power. Whether you're harnessing the wind or flowing water, this generator is a...
DFRobot SEN0715 Miniature Non-Contact Liquid Level Sensor
·
This compact capacitive sensor detects the presence or level of liquid through non-metallic container walls, so it does not need to touch the liquid. That helps avoid corrosion, contamination and media adhesion when monitoring aggressive liquids such as strong acids, alkalis and toxic liquids in ...
Submersible 3V DC Water Pump - Vertical Type
·
A small submersible DC water pump for fountains, plant-watering systems, and other beginner projects. The pump draws water in from the side of the plastic casing and pushes it out through the tubing port. It runs on 3 V and draws approximately 100 mA, making it easy to drive from a microcontrolle...
BOSON Drip Irrigation Kit for micro:bit & K10 (No Board)
·
This hands-on STEM kit helps students build a smart drip irrigation model while learning about automated agriculture, water conservation and climate action. It combines environmental sensors with a micro:bit or UNIHIKER K10 microcontroller to monitor soil moisture and water level, then control a ...
BOSON Drip Irrigation STEM Kit with UNIHIKER K10
·
This hands-on STEM kit helps students build a working smart watering system while learning about automated agriculture, water conservation and climate action. It combines BOSON environmental sensors and a water pump with the included UNIHIKER K10 AI Coding Board to monitor soil moisture and avail...
PETG Filament 1.75mm, 1Kg Roll - White
We've finally found the best White PETG Filament in Australia! This is a 1kg reel of 1.75mm White PETG (Polyethylene Terephthalate with a glycol modification) plastic filament for 3D printing.PETG is used to make water bottles, food packaging and has the useful rigidity and mechanical properties ...
PETG Filament 1.75mm, 1Kg Roll - Red
We've finally found the best Red PETG Filament in Australia! This is a 1kg reel of 1.75mm Red PETG (Polyethylene Terephthalate with a glycol modification) plastic filament for 3D printing.PETG is used to make water bottles, food packaging and has the useful rigidity and mechanical properties...
DFRobot RS485 Industrial Residual Chlorine Sensor
·
This industrial-grade residual chlorine sensor is designed for precise, reliable water quality monitoring in demanding environments. Its integrated probe and housing measure residual chlorine concentrations, specifically hypochlorous acid and hypochlorite ions, over a 0 to 10 mg/L range.The senso...
Liquid Flow Meter - Plastic 1/2 NPS Threaded
·
An inline flow sensor for measuring liquid or water flow in solar heating, computer cooling, irrigation, and other fluid projects. The sensor uses a pinwheel with a magnet and an external hall effect sensor to count rotations through the plastic wall, keeping the electronics safe and dry. Each p...
DFRobot SEN0716 Industrial Non-Contact Liquid Level Sensor IP67
·
This industrial non-contact liquid level sensor uses capacitive sensing to detect liquid through non-metallic container walls, so it does not need to touch corrosive, viscous or contaminated liquids. It is suited to liquids such as milk, honey, latex, blood, engine oil and acid or alkaline soluti...
Gravity: Non-contact Arduino Water / Liquid Level Sensor
A non-contact liquid level sensor that detects the presence of liquid through a container wall — no direct contact with the liquid required. Using advanced signal processing via the XKC-Y25-T12V chip, it works through most non-metallic containers including plastic, glass, and ceramic. This makes...
![Hand-Moldable Plastic - Low Temperature Thermoplastic [100g Bag]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkCD3xJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--ea2a4f52369a0a74468b077cd33a02c269c553e2/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsIOgtmb3JtYXQ6CXdlYnA6EnJlc2l6ZV90b19maXRbB2kCkAFpApABOgpzYXZlcnsHOgxxdWFsaXR5aVc6CnN0cmlwVEkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--f55be79df1f1b025f86d676a642df617e240cfbc/image_5b2d5de5-4ac2-424c-877c-d89708247b5a.jpg)
Hand-Moldable Plastic - Low Temperature Thermoplastic [100g Bag]
·
Low-temperature thermoplastic beads (also known as Polymorph, Instamorph, or Friendly Plastic) that become moldable when heated to approximately 60 °C (140 °F). Simply heat in hot water until the beads turn clear and stick together, then knead and shape by hand. Once cooled, the plastic hardens t...
16mm Metal SPDT Momentary Pushbutton - Yellow LED Ring
·
Add a rugged, polished control to your panel or enclosure with this 16mm metal momentary pushbutton. The stainless steel body gives it a sturdy feel, while the illuminated yellow LED ring provides a clear visual indicator or helps locate the button in low light.This is an SPDT momentary switch, s...
Metal Momentary Pushbutton with Green LED Ring - 16mm
·
Add a sturdy, polished control to your project with this 16mm metal momentary pushbutton. The stainless steel body gives custom panels, enclosures and interactive builds a more rugged feel than a basic plastic switch.The switch is SPDT and momentary, so it changes circuit state only while it is b...
Metal Momentary Pushbutton - 16mm, Blue LED Ring
·
Add a clean, heavy-duty control to your enclosure or custom panel with this 16mm metal momentary pushbutton. The stainless steel body gives it a rugged, professional feel, while the blue illuminated LED ring provides a clear visual indicator or makes the button easier to find in low light.This is...
16mm Metal Momentary Pushbutton - Red LED Ring
·
Add a clean, rugged control to your enclosure or panel with this 16mm metal momentary pushbutton. It uses an SPDT momentary switch action, so it changes circuit state only while the button is being pressed.The stainless steel body gives it a more professional feel than a basic plastic switch, whi...
Metal Latching Pushbutton Switch with White LED Ring - 16mm
·
This heavy-duty metal pushbutton is a compact panel-mount latching switch with an illuminated white LED ring. It gives custom panels, enclosures and interactive projects a clean, rugged interface for basic on/off control.The switch is SPDT and latching, so pressing it changes the circuit state, t...
