All Products
Showing 21-40 of 41 products
1.25mm Pitch 8-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
·
A slim, reliable 1.25 mm pitch cable with 8-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky. This cable uses 1:N reversed wiring, meaning pi...
1.25mm Pitch 9-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
·
A slim, reliable 1.25 mm pitch cable with 9-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky. This cable uses 1:N reversed wiring, meaning pi...
Adafruit LED Glasses Driver - nRF52840 Sensor Board
·
The Adafruit LED Glasses Driver is a slim, Bluetooth-enabled controller board built around the Nordic nRF52840 chipset. Originally designed to drive the Adafruit LED Glasses RGB LED matrix, it also works brilliantly as a compact standalone development board with built-in sensors and STEMMA QT con...
1.25mm Pitch 6-pin Cable 20cm long 1:1 Cable
·
A slim, reliable 1.25mm pitch cable with 6-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky. This cable uses 1:1 symmetric wiring, meaning pi...
Adafruit MOSFET Driver - For Motors, Solenoids, LEDs, etc
·
The Adafruit STEMMA MOSFET Driver makes it safe and simple to control motors, solenoids, high-power LEDs, and other current-hungry loads from any microcontroller. Instead of wiring up a transistor and flyback diode on a breadboard, this compact board has everything built in — just connect power, ...
Adafruit CAN Bus BFF Add-On for QT Py
·
The Adafruit CAN Bus BFF is a compact add-on that brings CAN bus capabilities to any QT Py or Xiao board. Powered by the MCP26525 chipset with SPI interface, it provides better range and addressing than I2C, making it well suited for robotics and sensor networks. Drivers are available for both Ar...
Adafruit Proto Doubler PiCowbell for Pico and PicoW
·
The Adafruit Proto Doubler PiCowbell gives your Raspberry Pi Pico or Pico W two side-by-side socket slots — plug in your Pico on one side and a PiCowbell accessory on the other, no soldering or stacking headers required. It also adds LiPo battery charging, a power switch, reset button, STEMMA QT ...
Adafruit Proto Tripler PiCowbell for Pico and PicoW
·
The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It also includes LiPo battery charging, a power switch, reset button, STEMMA QT conne...
Adafruit bq25185 USB / DC / Solar Charger with 3.3V Buck Board
·
The Adafruit bq25185 is an all-in-one charging and power supply board that supports USB, DC, and solar charging with an integrated 3.3V buck converter. It is an excellent upgrade from MCP73833 or MCP73831-based chargers, combining power path management and regulated output in a single board. Con...
JST PH 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm
·
This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. We're carrying these to match up with any of our boards with 'STEMMA' connectors on them such as the Hallowing or Trellis M4. Can also be used with any STEMMA bre...
JST PH 3-pin Plug to Color Coded Alligator Clips Cable
·
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with grippy mini alligator clips. We're carrying these to match up with any of our boards or breakouts with 3-pin 'STEMMA' connectors on them such as the HalloWing or NeoTrellis M4. This cable has a JST PH 3-pin ...
Grove Cable Pigtail - 2mm pitch 100mm long
·
A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to custom wiring. Specifications Connector – Grove (2 mm pitch), 4-pin Length – 100 mm Wires – 4 (bare ends) Wire Colours Black – GND Red...
Pimoroni Presto - board only
·
The Pimoroni Presto is an RP2350-powered desktop companion featuring a 4" square touchscreen IPS display, elegant black aluminium stand, and RGB backlighting. Fully programmable with MicroPython or C/C++, it's designed to keep useful information at your fingertips — calendars, weather, photos, ge...
Badger 2040 + accessories
A hackable, programmable badge with E Ink® display, powered by Raspberry Pi RP2040. In honour of Raspberry Pi's 10th birthday, we've fused a RP2040 microcontroller with an EPD display to make a stylishly monochrome, maker friendly, e-paper badge(r) to attach to your person, your office door...
Adafruit STEMMA Piezo Driver Amp - PAM8904
The Adafruit STEMMA Piezo Driver Amp uses the PAM8904 switched-capacitor driver to amplify signals for piezo elements at up to 300 kHz. With bridge-tied load (BTL) output and up to 3× voltage multiplication, it can deliver approximately 13 Vpp — much louder than driving a piezo directly from a 3V...
STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm long
·
This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latching connection that is easy to insert and remove. Compatible with both STEMMA QT...
Tufty 2040 + Accessory Kit
A hackable, programmable badge with 2.4" (320 x 240) TFT LCD colour display, powered by Raspberry Pi RP2040. We've had a lot of requests for a LCD version of Badger 2040 so tada - meet our pal Tufty. In a nutshell, we've combined a RP2040 microcontroller with a nice, crisp LCD screen to make a s...
Enviro Indoor (Pico W Aboard) with Accessory Kit
A wireless environmental monitoring board to keep track of inside conditions in your home, office or other habitat. Onboard sensors can measure temperature, humidity, pressure, gas and light. The top of the range BME688 sensor on Enviro Indoor can measure temperature/humidity/pressure with a...
Adafruit STEMMA Audio Amp - Mono 2.5W Class D - PAM8302
The Adafruit STEMMA Audio Amp is a compact mono Class D amplifier based on the PAM8302 chip, delivering up to 2.5W into 4 Ω speakers from a 2.0–5.5V DC supply. With over 90% efficiency at half a watt into 8 Ω, it's ideal for portable and battery-powered audio projects. This plug-and-play STEMMA ...
Pimoroni Explorer
·
An electronic adventure playground for physical computing, built around the RP2350 chip. Includes a 2.8" LCD screen, a speaker, a mini breadboard, and much more!Our Explorer lets you play with circuits, build science experiments and prototype tiny robots and inventions. We've incorporated tinkeri...
