Adafruit
1.25mm Pitch 9-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
All Products
Headers & Connectors
New Arrivals
Circuitry & IOT
Jumpers & Wires
Prototyping
Digital Technologies
Components
$2.80
|
In stock at supplier
A slim, reliable 1.25 mm pitch cable with 9-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click f...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
A slim, reliable 1.25 mm pitch cable with 9-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky.
This cable uses 1:N reversed wiring, meaning pin 1 on one connector maps to pin 9 on the other, pin 2 to pin 8, and so on. Molex PicoBlade compatible.
Key Features
- 1.25 mm Pitch Connectors – Ultra-slim profile for space-constrained builds
- 1:N Reversed Wiring – Pin order is mirrored from one end to the other
- Friction-Lock Mechanism – Secure, click-in connection that won't pull loose
- 20 cm Length – Convenient short-run cable for internal wiring
- 9 Pins – Suitable for multi-signal connections
- Molex PicoBlade Compatible – Works with standard 1.25 mm pitch connectors
Ideal For
- Connecting breakout boards and sensors with 1.25 mm pitch headers
- Internal wiring in compact enclosures and portable projects
- Replacing bulkier JST PH or 0.1" dupont connections
Package Contents
- 1× 1.25 mm pitch 9-pin cable (20 cm, 1:N wiring)
Note: This cable uses 1:N (reversed) wiring. Pin 1 connects to pin 9, pin 2 to pin 8, etc. If you need straight-through 1:1 wiring, check the 1:1 cable variants.
Jargon buster
Plain-language definitions for the technical terms used above.
- breakout
- A breakout board carries a small or fine-pitched component and brings its connections out to standard, breadboard- and header-friendly pins. Describing a part as a breakout means it can be wired into a project without soldering directly to the component's tiny contacts.
- Headers
- Rows of connector contacts on a fixed pitch (commonly 2.54 mm) used to link a board to a breadboard, jumper wires, or another board. They come as male pin headers and female socket headers; when a module ships with pre-soldered headers it can be used straight away, whereas bare pads require soldering the pins yourself.
- JST PH
- A small keyed plug-and-socket connector with 2 mm pin spacing, often used for low-power electronics connections. You need the correct JST PH cable, and its current rating limits how much power should be passed through it.
- pH
- A measure of how acidic or alkaline a liquid is, on a scale where 7 is neutral. For a water monitoring kit, pH tells you about water chemistry and whether the included probe matches the range and accuracy your project needs.
Find this product in
Prototyping & Wiring
