All Products
AI Overview
“esp” is most commonly shorthand for Espressif Wi‑Fi/BLE microcontrollers (ESP32/ESP8266). Here are the most relevant picks by use-case:
ESP32 dev boards (Wi‑Fi + Bluetooth LE)
- For a modern, broadly compatible starter board: ESP32-C3 RISC V Developer Board - 4 MB SPI Flash (ESP32‑C3, 4MB flash) ($23.48)
- For newer connectivity (adds Wi‑Fi 6 + Zigbee/Thread support): ESP32-C6-DevKitC-1-N8 - 8MB SPI Flash (ESP32‑C6, 8MB flash) ($24.10)
- If you want lots of memory for larger projects (UI, audio, buffering): ESP32-S3-DevKitC-1-N8R8 - ESP32-S3-WROOM-1 (ESP32‑S3, 8MB flash + 8MB PSRAM) ($46.60) or ESP32-S3-DevKitC-1-N8 - ESP32-S3-WROOM-1 Dev Board - 8MB Flash (8MB flash) ($37.58)
- Feather-format (battery-friendly ecosystem, headers included): Adafruit ESP32 Feather V2 with Headers - 8MB Flash + 2 MB PSRAM (8MB flash + 2MB PSRAM) ($35.43)
- Pro Mini footprint + Qwiic/I2C: SparkFun ESP32 Qwiic Pro Mini (ESP32‑PICO‑MINI, includes PSRAM) ($23.04)
ESP8266 modules & quick Wi‑Fi add-ons (Wi‑Fi only)
- SMT Wi‑Fi module for embedded builds: ESP8266 SMT Module [ESP-12S] (ESP8266, compact module) ($13.38) or ESP8266 SMT Module - ESP-12 ($18.48)
- Simple on/off switching project (pairs with ESP‑01/ESP‑01S): ESP8266 ESP-01/ESP-01S Relay WiFi Smart Control Module for Arduino (relay carrier controlled via GPIO0) ($4.29)
Thread/Zigbee border router (Matter/Thread networking)
- Bridge Thread mesh ↔ IP network: Espressif Border Router - ESP Thread BR-Zigbee GW ($26.18)
- Add Ethernet to the border router setup: Espressif Ethernet - ESP Thread BR-Zigbee GW_SUB ($45.82)
ESP32 display/terminal devices (ESP-powered UI)
- Handheld ESP32-S3 terminal w/ 3.5" 480×320 capacitive touch + OV2640 camera: ESP Terminal- 3.5 inch 480x320 SPI TFT capacitive touch display with OV2640 camera ($87.57)
- Larger HMI-style touch display w/ case: CrowPanel 5.0"-HMI ESP32 Display 800x480 RGB TFT LCD Touch Screen with Case (5.0" 800×480, ESP32‑S3 based) ($69.22)
What did “esp” refer to for your project?
Collections
Showing 21-40 of 100 products
ZigStar UZG-01 - Universal Zigbee Gateway
UZG-01 LAN/POE WIFI USB ZigBee 3.x Coordinator Say Hello, to remake of very popular ZigStar LAN Gateway,most important addition is that is having on board PoE at/af, NEW CC2652P7 chip with support up to 300 Zigbee devices, beautiful enclosure. It's using CC2652P TI chip, the most powerful (+20...
Arduino Nano ESP32
The Arduino Nano ESP32 brings the ESP32-S3 into the familiar Nano form factor, supporting both Arduino and MicroPython programming. Based on the u-blox NORA-W106-10B module, it features Wi-Fi and Bluetooth Low Energy with a built-in antenna, making it ideal for IoT projects. The board runs a 32-...
ESP8266 Wifi Bee (Arduino Compatible)
Wifi Bee-ESP8266 is a Serial-to-WIFI module using XBEE design in a compact size, compatible with XBEE slot, applicable to a variety of 3.3V single-chip system. It can be used for Arduino, wireless data transfer, remote control. On-board switch can be used to easily select the Startup module...
SparkFun WiFi Shield - ESP8266
The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. There are a variety of designs based around the ESP8266, including tiny, modular boards and more accessible development boards l...
SparkFun ESP8266 Thing - Dev Board (with Headers)
This is the SparkFun ESP8266 Thing Dev Board — a development board that has been solely designed around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective and very capable WiFi-enabled microcontroller. Like any microcontroller, it can be programmed to blink L...
SparkFun ESP32 Thing
The SparkFun ESP32 Thing is a comprehensive development platform for Espressif’s ESP32, their super-charged version of the popular ESP8266. Like the 8266, the ESP32 is a WiFi-compatible microcontroller, but to that it adds support for Bluetooth low-energy (i.e BLE, BT4.0, Bluetooth Smart), and...
Wifi Bee-RN-XV
The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware. In other words, if your project is set up for X...
ESP8266 ESP-01S Relay
A WiFi-controlled relay module based on the AI-Thinker ESP-01S (ESP8266). It lets you switch AC or DC loads remotely over WiFi, making it a simple building block for smart home automation, IoT switching, and remote control projects. The module comes pre-loaded with demo firmware — supply 5V DC p...
ESP8285 DT-06 Wifi to TTL
The DT-06 is a compact Wi-Fi-to-TTL serial module based on the ESP8285 — essentially an ESP8266 with 1 MB of built-in SPI flash. It provides a simple way to add Wi-Fi connectivity to any microcontroller project via a UART serial interface, using AT commands or custom firmware. The module support...
Espruino WiFi
The Espruino WiFi is a tiny WiFi-enabled development board that runs JavaScript directly — no computer connection required after programming. Built around the STM32F411 (Arm Cortex-M4 at 100 MHz) with an ESP8266 WiFi module, it lets you write, upload, and debug JavaScript code using the Espruino ...
Pycom Pycase - Clear
The Pycase is a compact, transparent enclosure designed specifically for Pycom development boards paired with an expansion board. It accommodates the development board, expansion board, antenna, and has room for a small battery. Compatibility Pycom WiPy Pycom LoPy Pycom SiPy Pycom FiPy Pycom GP...
Pycom Pycase - Grey
Pycase is a small, transparent case developed specifically for a Pycom development board and expansion board combo. Holds the development board, expansion board, antenna, and there’s even room for a small battery. Pycase is compatible with WiPy, LoPy, SiPy, FiPy, or GPy. Note: the expansion bo...
Adafruit AirLift – ESP32 WiFi Co-Processor Breakout Board
Give any microcontroller WiFi connectivity with the Adafruit AirLift Breakout. This board uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main microcontroller can focus on your application logic. The ESP32 communicates ov...
GRIS 150M Miniature WiFi(802.11n) Module
Does it still bother you that you cannot access the Internet anytime anywhere? Here comes a new mini wireless network card, plug and play. Bring you a fast and stable wireless network!This is a 150M miniature USB WiFi module that fully complies with IEEE 802.11n standard, up to 150Mbs data rate a...
ESP-PSRAM64H Chip - 64 Mbit Serial Psuedo SRAM - 3.3V 133 MHz
The ESP-PSRAM64H is a 64 Mbit (8 MB) serial pseudo SRAM chip in a compact SOIC-8 package. It provides fast, unlimited read/write external memory for microcontrollers like the ESP32 and Teensy 4.1, which have dedicated PSRAM pads or memory-mapping support for seamless integration. Unlike flash or...
Homefixer ESP8266 devboard
Another development board for ESP8266-12F. But this one is a bit different, made to be easy to set up without the need for additional hardware like programmers and voltage regulators. A wide voltage range switching regulator enables the user to use different battery technologies from 1 AA cell up...
Breadboard adapter for ESP8266 Serial-to-WiFi transceiver
A breadboard adapter for the popular ESP-01 model of the ESP8266 serial-to-Wi-Fi transceiver module. It converts the ESP-01's 2×4 pin header into two breadboard-friendly single-row headers with clearly labelled pin names, making prototyping with the ESP8266 much more convenient. The ESP-01 modul...
ESP32S Wifi Bluetooth Combo Module
The ESP32S is a WiFi and Bluetooth combo module built around the Espressif ESP32 dual-core processor. It supports 802.11 b/g/n WiFi with speeds up to 150 Mbps and Bluetooth v4.2 (both Classic and BLE), making it a versatile foundation for IoT, wearable devices, and wireless projects. With dual X...
e-ink Display Module for ESP32
This is an ESP32-integrated 2.13”e-ink display with built-in WiFi and Bluetooth functions that can connect to Alibaba Cloud to achieve remote display control. It supports controlling other devices via its IO ports, which greatly saves development cost. This e-ink display module can clearly displa...
ESP8266 TPYBoard V202 Pyboard MicroPython Development Board
This development board is based on ESP8266, it transmits data through the USB interface. The WiFi communication supports python language, makes it possible for you master the communication technology of 8266 module. This microPython development supports Lua and MocroPython development languages a...
