All Products

SKU: RP-SC0224 · MPN: SC0224

A short adapter cable that converts micro HDMI to a standard HDMI socket. Use your existing HDMI cables with Raspberry Pi 4, Pi 5, and other micro HDMI devices. The 235mm length provides flexibility for routing cables in tight spaces or enclosures while keeping connections neat. Key Features ...

SKU: AF-2465 · MPN: 2465

The PowerBoost 1000C is a DC/DC boost converter with a built-in LiPo battery charger and smart load-sharing circuit. It takes any 3.7V LiIon/LiPoly battery and boosts the output to 5.2V for powering 5V projects like Arduino, Raspberry Pi, or BeagleBone — even while the battery is charging. The l...

SKU: WS-13857

A 7-inch IPS HDMI display with case from Waveshare, featuring 1024×600 hardware resolution (configurable up to 1920×1080 via software). The toughened glass capacitive touch panel (6H hardness) provides smooth 5-point touch input on supported systems. Compatible with Raspberry Pi, Jetson Nano, Be...

SKU: LB-LR0121L

This HD 7-inch Touch Screen Display is an affordable way to add video output to your Raspberry Pi.  The display has a resolution of 1024 x 600, and supports the Raspberry Pi 3 Model B(and other hardware such as the Banana Pi and Orange Pi, Beaglebone Black etc). The display connects to your...

SKU: AF-903 · MPN: 903

Store your project safe and sound in this nice weatherproof box with a clear top. We picked up this box because we like the machinable ABS plastic body and tough clear polycarbonate cover, the built in weatherproof gasket seal, and the easy-open screws that can be taken apart as many times as you...

SKU: AF-1994 · MPN: 1994

This 5V 2A USB power supply provides clean, regulated power for single-board computers like the Raspberry Pi and BeagleBone, or any other USB-powered device with high current demands. It outputs via a USB Type-A port, so you can use whatever USB cable your project requires. The supply outputs 5....

SKU: AF-1933 · MPN: 1933

A 7" TFT display with 800×480 (WVGA) resolution and a compact HDMI mini driver board. Simply connect the USB power cable to a 5V supply and plug in an HDMI source for instant video output — no complex configuration required. The display uses the AT070TN94 panel and is driven by a small HDMI driv...

SKU: AF-1934 · MPN: 1934

This 7" TFT display delivers 800×480 resolution with an extra-bright backlight and a versatile driver board that accepts HDMI, VGA, and composite (NTSC/PAL) video inputs. Simply connect a 5–12V DC power adapter and plug in your video source — the driver auto-detects the active input and displays ...

SKU: SF-PRT-12790

This is a 2x23 pin female PTH header, with extra long legs which makes great for stacking. This piece is in the common configuration for Beaglebone Black headers. Each pin has a spacing of 0.1" in between each other. Documents: Datasheet

SKU: SF-PRT-12791

This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet

SKU: AF-954 · MPN: 954

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB por...

SKU: AF-3318 · MPN: 3318

Check out this handy USB extension cable, which will make it easy for you to enclose a device that has a Mini-B USB type port. We think this would be most handy when putting a Teensy, FTDI friend, USB LiPo charger, BeagleBone, or any other Mini-B device into a box!This Mini-B male/female extensio...

SKU: AF-2998 · MPN: 2998

Do you want your cup to runneth over with USB ports? Do you want it to also be filled with the sweet, sweet nectar of an on-off switch? If the answer to either of those questions is yes - or "I never really thought about it that way but I guess so" - then this is the perfect product for you! T...

SKU: AF-2876 · MPN: 2876

A full-size wireless keyboard with slim chiclet keys and an integrated trackpad on the right-hand side. The trackpad supports both left and right clicks, eliminating the need for a separate mouse. At just 7 mm thick, it is lightweight and portable — ideal for use with Raspberry Pi, BeagleBone, or...

SKU: AF-2727 · MPN: 2727

This adapter cable converts a 5.5mm/2.1mm DC barrel jack power supply to a Micro USB plug, allowing you to power Micro USB devices from a standard barrel jack power adapter. The barrel jack end is centre-positive polarity. It works great for powering Arduinos, BeagleBones, Raspberry Pis, Android...

SKU: SF-WIG-14271

With Single-Board Computers (SBCs) on the rise, it is a good idea to have an easy way to interface with them. Operating on a 2.4GHz frequency, the Multimedia Wireless Keyboard possesses a normal-sized key layout, media controls and a multitouch track pad. This keyboard is powered by a built-in 85...

SKU: AF-2397 · MPN: 2397

This 7″ display kit features a 1024×600 resolution TFT panel with a resistive touchscreen overlay and HDMI stereo audio output. The included driver board accepts HDMI, VGA, and composite (NTSC/PAL) video inputs, making it compatible with Raspberry Pi, BeagleBone, and any device with standard vide...

SKU: AF-2396 · MPN: 2396

This 7" HDMI display with resistive touchscreen delivers 1024×600 resolution in a compact form factor ideal for Raspberry Pi, BeagleBone Black, and other single-board computers. The included mini driver board is powered via USB and accepts HDMI input for high-quality video output. The kit also i...

SKU: AF-2406 · MPN: 2406

Its a mini panel-mountable HDMI monitor! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a case or rail. This backpack features the TFP401 for decoding video, and includes the attached display so its plug-n-play. Th...

SKU: AF-2395 · MPN: 2395

A 7-inch touchscreen display with 1024×600 resolution and a resistive touchscreen overlay, ideal for Raspberry Pi projects, embedded computing, and multimedia setups. The included driver board supports HDMI, VGA, and composite (NTSC/PAL) inputs, making it compatible with a wide range of devices. ...