All Products
Showing 1-20 of 100 products
NFC Tag (Round)
NFC Tag (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. This Mifare-...
2.2 18-bit color TFT LCD display with microSD card breakout
·
A 2.2″ TFT LCD breakout with 320 × 240 resolution and full 18-bit colour (262,144 shades), driven by an ILI9340 (or compatible) controller over 4-wire SPI. The onboard frame buffer means even low-memory microcontrollers can drive this display without issues. The breakout includes an ultra-low-dr...
2.4 inch TFT Touch Shield for Arduino
A 2.4″ colour TFT LCD touch shield from Elecrow that plugs directly onto an Arduino Uno or Mega. The ILI9341-driven display delivers 240 × 320 resolution with 18-bit colour (262,000 shades), and includes a 4-wire resistive touchscreen, microSD card slot, and reset switch. Key Features 240 × 32...
NFC Classic Sticker
NFC classic sticker (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. ...
2.8 TFT LCD with Cap Touch Breakout Board w/MicroSD Socket
·
The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a capacitive single-touch touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delivers vivid colour output for interactive projects. The breakout supports two inte...
![2.8 TFT LCD with Touchscreen Breakout Board w/MicroSD Socket [ILI9341]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkCrHFJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--eeb0d02bdb4be38e5ff5af350c374cdc689d9dca/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsIOgtmb3JtYXQ6CXdlYnA6EnJlc2l6ZV90b19maXRbB2kCkAFpApABOgpzYXZlcnsHOgxxdWFsaXR5aVc6CnN0cmlwVEkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--f55be79df1f1b025f86d676a642df617e240cfbc/image_5bf390ca-ceb6-48a9-9d76-12ef646d262b.jpg)
2.8 TFT LCD with Touchscreen Breakout Board w/MicroSD Socket [ILI9341]
·
The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a resistive touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delivers vivid colour output for interactive projects. The breakout supports two interface modes: 8...
3.2 TFT LCD with Touchscreen Breakout Board w/MicroSD Socket - ILI9341
·
A large 3.2" colour TFT LCD breakout board with a built-in resistive touchscreen and a microSD card socket. The 240×320 pixel display is driven by the ILI9341 chipset and features a bright 6-LED white backlight. The breakout board includes 3–5 V level shifters, making it compatible with both 3.3 ...
Adafruit 1.14 240x135 Color TFT Display + MicroSD Card Breakout - ST7789
·
The Adafruit 1.14" 240×135 Colour TFT Display Breakout with MicroSD is a compact, high-density IPS display driven by the ST7789 controller. With 240×135 pixels at 260 PPI in full 16-bit colour, it delivers sharp, vibrant visuals with 80° viewing angles in all directions — a significant step up fr...
2.8 TFT Touch Shield for Arduino w/Capacitive Touch
·
The 2.8" TFT Touch Shield with Capacitive Touch plugs directly into an Arduino and provides a bright, full-colour display with a smooth glass capacitive touchscreen and onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI for the d...
1.54 240x240 IPS TFT LCD Display with MicroSD Card Breakout
A 1.54-inch IPS TFT LCD breakout with 240×240 resolution, 16-bit colour (RGB565), and an onboard microSD card slot for storing and displaying images. The ST7789 driver communicates via SPI or DFRobot's GDI interface for plug-and-play connectivity with compatible main controllers. Powered by 3.3–...
2.8 TFT Touch Shield V4.3
The 2.8" TFT Touch Shield V4.3 is an Arduino-compatible display shield featuring a 240×320 colour LCD with a resistive touchscreen and onboard SD card socket. It communicates over SPI, keeping pin usage low and leaving more pins available for other components. Driven by the ILI9341 controller, t...
2.0 320x240 Color IPS TFT Display with microSD Card Breakout
·
A vibrant 2.0" IPS TFT display breakout with 320×240 resolution and full-colour output, driven by the ST7789 controller. The IPS panel delivers vivid colour reproduction and wide viewing angles — a significant upgrade over CSTN-type displays found in older LCD modules. The breakout communicates ...
2.0 320x240 IPS TFT LCD Display with MicroSD Card Breakout
A 2.0" IPS TFT LCD display breakout with 320×240 resolution (RGB565), driven by the ST7789V controller. The wide 80° viewing angles in all directions ensure clear visibility, and the SPI interface makes it compatible with a broad range of microcontrollers including Arduino Uno, Leonardo, ESP32, E...
Edge101 Industrial ESP32 IoT Controller
·
Built around the ESP32 dual-core processor, the Edge101 is an industrial IoT controller for taking ESP32 and Arduino-based projects beyond the workbench and into real-world automation, monitoring and edge gateway deployments.It combines isolated RS485 with Modbus compatibility, isolated CAN bus, ...
SparkFun Thing Plus - ESP32 WROOM (USB-C)
The SparkFun ESP32 WROOM Thing Plus is a Feather-compatible development board built around Espressif's ESP32-WROOM module, featuring USB-C, integrated Wi-Fi and Bluetooth, a microSD card slot, LiPo battery management with fuel gauge, and a Qwiic I2C connector for plug-and-play sensor expansion. ...
Tiny GamePi15 with Raspberry Pi Zero WH
The GamePi15 is a compact retro game console expansion designed specifically for the Raspberry Pi Zero series. Simply attach your Pi Zero to the board and you have a fully portable handheld console with built-in display, controls, speaker, and battery charging circuitry. This kit includes a Rasp...
ESP32(ESP-WROOM-32) WiFi Bluetooth Dual-Core MCU Module
INTRODUCTION The ESP32 WiFi and Bluetooth chip is the latest generation of Espressif products. It has a dual-core 32-bit MCU, which integrates WiFi HT40 and Bluetooth/BLE 4.2 technology inside. Compared to the arduino ESP8266 (the previous generation), the ESP32 has a significant ...
Assembled Adafruit HUZZAH32 – ESP32 Feather Board - with Stacking Headers
·
Aww yeah, it's the Feather you have been waiting for, and now with stacking headers! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer c...
M1 Dock AI Development Kit
The M1 Dock AI Development Kit is a compact embedded AI platform built around the Kendryte K210 chip — a dual-core RISC-V processor with an integrated neural network processor (KPU) and audio processor (APU). With MicroPython support built in, you can start developing AI applications quickly. Th...
ESP32 GREY Development Kit with 9Axis Sensor
Description M5Stack GRAY Kit is from one of the M5Stack development kit series, it’s a upgrade from the Basic kits. In comparison, Gray kit provide a extra IMU sensor, MPU6886+BMM150. With a IMU posture sensor, you can include posture detection in your work : accelerated speed, angulation...
