All Products

SKU: SF-COM-22891 · MPN: COM-22891

This Toshiba TLP290-4 optoisolator provides four isolated transistor-output channels in one device, helping pass signals between circuits while maintaining galvanic isolation.It supports AC or DC input drive and provides transistor outputs, making it suitable for interface and control designs whe...

SKU: DF-DFR0910 · MPN: DFR0910

This 10.1-inch capacitive touchscreen is a Raspberry Pi-based industrial screen packaged for use in Linux-driven industrial environments. It supports LVDS multi-touch with a 1280*800 image resolution and a 16:9 format.Built-in connectivity includes Ethernet, USB and WiFi, giving you options for l...

SKU: PR-PIM401

Six handy touch-sensitive buttons and LEDs for your micro:bit. Use touch:bit as a controller for games on micro:bit's LED matrix, or combine it with the radio functionality and use it as a controller for your robot. Just slot in your micro:bit, then code touch:bit with the block-based Mic...

SKU: PR-PIM272

Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?) Touch pHAT has six capacitive touch buttons, each with a bright white LED, designed to be completely agnostic about what they're used for. You can even use a dry erase pen to wri...

SKU: AF-334

If you've got a resistive touch screen that you'd like to use, you'll need this breakout! It has a fine pitch (0.5mm) connector soldered onto it and it's broken out into the 4 resistive wires of the panel. A petite 0.5"x0.5" (12.5mm x 12.5mm) with two mounting holes as well, that you can use f...

SKU: AF-333

A 4-wire resistive touch screen digitiser (originally designed for the Nintendo DS Lite) that works with a stylus or fingertip. It can be used with any microcontroller that has 2 digital pins and 2 analogue input pins, making it easy to add touch input to your projects — either as a standalone to...

SKU: AF-2993

A tri-colour tower light with red, yellow, and green LED segments plus a built-in buzzer, powered by 12V DC. Each light and the buzzer are independently controlled via separate wires, making it easy to indicate machine status, project states, or alert conditions from a microcontroller. The light...

SKU: DF-SER0043

INTRODUCTION The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc. A 360 degree servo's operation is more similar to a DC motor than a standard s...

SKU: EF-EF08230

TP Bot is a smart programming car for micro:bit. Can it be considered a different robot car because of its pre-defined functions that don't require a micro:bit? It can also be used as a teaching tool at the same time, you can code it through micro:bit or make extensions for other modules and stan...

SKU: AF-4920

This little buck converter based on the TPS62827 is super handy, taking up to 5.5V input and providing a 3.3V output with up to 2A current. It's great for supplying power to hungry 3.3V voltage circuits from a range of battery or power options.  This chip provides up to 2 Amp load current ac...

SKU: EF-EF03424

Ring:bit car V2 line following module is a dedicated module designed for the Ring:bit car V2, it is easy to be installed to achieve the line following function for the Ring:bit car V2.Equipped with double infrared probes, it can detect the distance between 2~12mm accurately that can achieve th...

SKU: LB-TRAFFIC-LED

Doing some breadboarding and want to make up your own set of traffic lights?This kit includes 1 x Red 10mm LED1 x Yellow 10mm LED1 x Green 10mm LED5 x 220ohm Resistors

SKU: LB-LS3779

A pack of 10 general-purpose 2N2222A NPN bipolar transistors in a TO-92 package. The 2N2222A is one of the most widely used transistors in electronics, suitable for switching and signal amplification in a broad range of circuits. Specifications Type – NPN bipolar transistor Part Number – 2N22...

SKU: SF-COM-00588

The IMD2AT108 is a complementary NPN/PNP transistor array IC that integrates two transistors, two base resistors, and two pull-up resistors into a single Mini6 package (similar to SOT-457). Commonly used for level translation and logic inversion in compact designs. Compatible with SOT-23 breakou...

SKU: SF-COM-00521

These are very common, high quality BJT NPN transistors made by ST Micro. Datasheet: 2N3904

SKU: SF-COM-13951

The 2N5191G is an NPN silicon transistor rated for up to 60 V and 4 A, suitable for driving larger loads, switching, and amplification applications in through-hole circuit designs. Specifications Type – NPN silicon transistor Part Number – 2N5191G Maximum Collector-Emitter Voltage (VCEO) – 6...

SKU: SF-COM-13689

The BC337 is an NPN silicon bipolar junction transistor (BJT) suitable for switching and amplification in general-purpose circuits. With a collector current rating of 800 mA and a collector-emitter voltage of 50V, it can drive relays, LEDs, small motors, and other moderate loads directly from a m...

SKU: DF-FIT0322

This package includes 17 species transistors in common use.It's convenient for you to make some small designs.You could find a suitable one for your type! A transistor is a semiconductor device used to amplify and switch electronic signals and electrical power.It is composed of semiconductor mat...

SKU: PI-COM0302

Transistor are a type of electronic switch used for controlling the flow of a circuit and amplifying signals.They have three legs: the base, the collector, and the emitter.NPN: When a voltage is applied to the base leg of the transistor it allows current to flow from the collector to the emitter....

SKU: SF-COM-00522

These are very common, high quality BJT, PNP transistors made by ST Micro. Datasheet: 2N3906