All Products
Showing 7841-7860 of 8010 products · 2479 unavailable products hidden
VL53L0X Time-of-Flight Distance Sensor Carrier with Voltage Regulator, 200cm Max
VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor - GY-530
VL53L1X Time of Flight (ToF) Sensor Breakout
Voice Prompt Module with Integrated MP3 Player and Speaker
MPN: DFR1173
Voice Recorder Module-Breakout
Voltage Regulator - 12V
Voltage Regulator - 3.3V
Voltage Regulator - 5V
Voltage Regulator - 5V
Voltage Regulator - Adjustable
Voltage Regulator - Adjustable LM1117 SMD
VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG Play + Record [v4]
VS1053 MP3 Shield
W25Q64JVXGIQ - 3V 64Mbit / 8 MB QSPI NOR Flash Memory - 10 Pack
W5100 Ethernet Module
W5100 Ethernet Shield for Arduino
W5200 Ethernet Shield
W5500 Ethernet with POE IOT Board (Arduino Compatible)
WAGO 221-412 Wire Connectors
WAGO 221-413 Wire Connectors
VL53L0X Time-of-Flight Distance Sensor Carrier with Voltage Regulator, 200cm Max
This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away. The VL53L0X uses time-of-flight measurements of infrared pulses for ranging, allowing it to give accurate results independent of the target’s color and s...
VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor - GY-530
The VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor is an advanced distance sensor module that provides highly accurate distance measurements using infrared laser technology. With a range of up to 2 meters, this compact and versatile sensor is perfect for proximity detection, obstacle avoidance...
VL53L1X Time of Flight (ToF) Sensor Breakout
The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for proximity sensing, presence detection, and collision avoidance on robots. This b...
Voice Prompt Module with Integrated MP3 Player and Speaker
· MPN: DFR1173
This compact voice prompt module integrates an intelligent MP3 playback chip with a 1 W speaker in a tiny 30 × 11 mm package. It supports MP3, WAV, and WMA hardware decoding with 16 MB of on-board storage that retains files even when power is lost. Control playback via the built-in button (short...
Voice Recorder Module-Breakout
Wanna buy a simple & practical voice recorder? This one is right for you! The voice recorder module supports 4 controlling modes (Arduino, AT command, on-board buttons, and ADKEY), and multi-segment voice recording. You can directly press the on-board buttons to record or play voice without using...
Voltage Regulator - 12V
The L7812 is a three-terminal positive voltage regulator with a fixed 12V output. It provides stable local regulation with built-in protection against overcurrent, thermal overload, and short circuits, making it a reliable choice for powering 12V components in your projects. With a maximum outpu...
Voltage Regulator - 3.3V
The LD1117V33 is a low-dropout (LDO) positive voltage regulator with a fixed 3.3V output. With on-chip trimming providing ±1% output voltage tolerance and built-in current and thermal limiting, it's a reliable choice for powering 3.3V circuits from higher voltage sources. Key Features Fixed 3....
Voltage Regulator - 5V
Take control of your voltage! These regulators will let you produce a reliable constant supply voltage for your circuits. Whether you're working from an unregulated supply or just need a precise voltage for your micro-controller we've selected a couple of great general purpose options. OutputV...
Voltage Regulator - 5V
This is the basic L7805 voltage regulator, a three-terminal positive regulator with a 5V fixed output voltage. This fixed regulator provides a local regulation, internal current limiting, thermal shut-down control, and safe area protection for your project. Each one of these voltage regulators...
Voltage Regulator - Adjustable
The LM317TG is a three-terminal adjustable positive voltage regulator with an output range of 1.2V to 37V and up to 1.5A output current. Only two external resistors are needed to set the desired output voltage, making it one of the simplest ways to create a custom voltage supply for your project....
Voltage Regulator - Adjustable LM1117 SMD
This is a 1A Adjustable SOT-223 voltage regulator capable of outputting 1.2V to 18V. The LM1117 uses the same pin-out and setup as the popular LM317 adjustable regulator, contained in a handy surface mount package. Requires two external resistors to function. Documents: FAN1117A.pdf SFE ...
VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG Play + Record [v4]
This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can also be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. You can ...
VS1053 MP3 Shield
An Arduino-compatible MP3 shield based on the VS1053B audio codec from VLSI. It decodes all major audio formats — including MP3, OGG Vorbis, AAC, WMA, FLAC, WAV, and MIDI — and can record in Ogg Vorbis, IMA ADPCM, and 16-bit PCM from the onboard microphone or line-in input. With an SD card slot ...
W25Q64JVXGIQ - 3V 64Mbit / 8 MB QSPI NOR Flash Memory - 10 Pack
The W25Q64JVXGIQ is a 3V 64Mbit (8MB) QSPI NOR flash memory chip in a standard SOIC-8 package. Ideal for storing code, assets, configurations, audio clips, and data logs on microcontroller projects — offering more storage than EEPROM with minimal cost and complexity. Well supported by CircuitPyt...
W5100 Ethernet Module
W5100 is a multifunctional Monolithic network interface chip, internal integrate a 10/100 Ethernet controller , it apply to a embedded system which is High-Integrate, high-stability, high-performance but low-cost. By using it, we can complete the internet linking without operating system supporti...
W5100 Ethernet Shield for Arduino
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip . The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sket...
W5200 Ethernet Shield
The W5200 Ethernet Shield adds wired internet connectivity to your Arduino. Simply stack it onto your board, connect an RJ45 cable, and start communicating over the network. The W5200 controller provides a 32 KB internal buffer — double that of the W5100 — and supports up to eight simultaneous TC...
W5500 Ethernet with POE IOT Board (Arduino Compatible)
W5500 Ethernet with POE Mainboard is a new member in our Ethernet family. It is based on the ATmega32u4 and W5500 Ethernet chip, which is quite useful to most IOT projects. W5500 chip is a Hardwired TCP/IP embedded Ethernet chip that provides easier Internet connection to embedded systems. It en...
WAGO 221-412 Wire Connectors
WAGO's 221 Series COMPACT Splicing Connector for all wire types saves 40% more space than its predecessor (222 series).These wire connectors accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as solid and stranded wires from 0.2 to 4 mm2 (24–12 AWG). This wide range allows yo...
WAGO 221-413 Wire Connectors
WAGO's 221 Series COMPACT Splicing Connector for all wire types saves 40% more space than its predecessor (222 series). These wire connectors accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as solid and stranded wires from 0.2 to 4 mm2 (24–12 AWG). This wide range allo...