All Products

SKU: WS-29330 · MPN: 29330

The Waveshare RP2350-GEEK is a compact development board built around the Raspberry Pi RP2350 microcontroller, featuring a built-in 1.14-inch colour LCD and CMSIS-DAP debug probe. It serves as both a standalone development platform and a USB debugger for other ARM-based microcontrollers. The boa...

SKU: WS-32576 · MPN: 32576

Industrial-Grade 6-Channel RP2350 Relay Module – Versatility Meets RobustnessEnhance your industrial automation systems with the unparalleled reliability and flexibility of our Industrial 6-Channel RP2350 Relay Module. Engineered to meet the rigorous demands of modern industry, this robust module...

SKU: WS-28816 · MPN: 28816

Unleash Your Creativity with the Waveshare RP2350-Zero Mini Development BoardElevate your next project with the Waveshare RP2350-Zero Mini Development Board, a powerhouse microcontroller development platform that draws on the innovative Raspberry Pi RP2350A dual-core and dual-architecture microco...

SKU: WS-29361 · MPN: 29361

The Waveshare RP2350-Zero is a compact development board built around the Raspberry Pi RP2350A microcontroller. It features a dual-core Arm Cortex-M33 processor alongside a dual-core Hazard3 RISC-V processor, clocked at up to 150 MHz, with 520 KB of SRAM and 4 MB of onboard flash memory. Designe...

SKU: DF-SEN0295

The RP-C18.3-LT is a circular flexible thin-film pressure sensor, 18.3mm in diameter, designed for highly sensitive detection of both static and dynamic force. When pressure is applied to the active area, resistance decreases proportionally — making it straightforward to interface with a microcon...

SKU: DF-SEN0294

This is a circular flexible thin film pressure sensor of short legs with a diameter of 18.3mm, which can be used to realize highly sensitive detection of pressure. The sensor is durable and designed to sense static and dynamic pressure in a high respond speed. Its advantages of recording the inte...

SKU: DF-SEN0298

This is a circular flexible thin film pressure sensor of long legs with a diameter of 7.6mm, which can be used to realize highly sensitive detection of pressure. The sensor is durable and designed to sense static and dynamic pressure in a high respond speed. Its advantages of recording the intens...

SKU: DF-SEN0297

The RP-C7.6-ST is a circular flexible thin-film pressure sensor with a compact 7.6 mm active area and ultra-thin 0.3 mm profile. It converts applied force into a variable resistance — output resistance decreases as pressure increases — making it straightforward to read with any microcontroller's ...

SKU: DF-SEN0293

The RP-L-170 is a long, flexible thin-film pressure sensor with a 170mm active area for detecting both static and dynamic pressure. As pressure is applied, the sensor's resistance decreases — making it easy to read with any analogue input on a microcontroller. Built from ultra-thin film with nan...

SKU: DF-SEN0299

The RP-L-400 is a long, flexible thin-film pressure sensor with a 400 mm active length. It detects both static and dynamic pressure by converting applied force into a variable resistance — resistance decreases as pressure increases. The ultra-thin construction (0.35 mm) and fast response time mak...

SKU: DF-DFR0315

FEATURESAPPLICATIONSSPECIFICATIONSNote: It has been newest Model: A1M8 --2017/5/15 DOCUMENTS SLAMTEC Website Development Kit SDK & Datasheet Related Rplidar Review by Gavin (@MechatronicsGuy) ICP-SLAM based on RoboPeak Low cost RP-Lidar and mrpt (1min23sec) RoboPeak Low Cost 360degree 5hz LI...

SKU: DF-DFR0583

&nbsp; FEATURES &nbsp; &nbsp; APPLICATIONS &nbsp; &nbsp; Obstacle Avoidance Autonomous Mapping Route Planning Navigation &nbsp;&nbsp; SPECIFICATION &nbsp; &nbsp; Model: RPLDIAR-A3 Distance Range: 0.15 - 25 m Angular Range: 0-360 degree Distance Resolution: <0.5 (0.15~1.5 meters) &nbsp; &nbsp; ...

SKU: DF-DFR1138 · MPN: DFR1138

##Introduction The RPLIDAR C1 is a new generation fusion-type DTOF (Direct Time of Flight) laser scanner from SLAMTEC. This advanced LIDAR system excels in high-definition detection of small and nearby objects, offering superior anti-interference and anti-adhesion capabilities. With a measurement...

SKU: DF-DFR1022

DTOF Ranging MethodThanks to the DTOF (Direct Time-of-Flight) technology developed by SLAMTEC, RPLIDAR S2 guarantees consistent ranging resolution. Even in longer distance, the resolution always keeps the same. Also, DTOF allows RPLIDAR S2 to detect almost ANY thing with different material types,...

SKU: DF-DFR1023

The RPLiDAR S2L is a 360° laser range scanner from SLAMTEC using Direct Time-of-Flight (DTOF) ranging technology. It delivers consistent resolution regardless of distance and can detect objects of virtually any material — including dark surfaces, mirrors, and transparent glass. With an 18-metre r...

SKU: DF-DFR1097 · MPN: DFR1097

##Introduction SLAMTEC self-developed SL-TOF (SLAMTEC Direct Time-of-Flight)SLAMTEC self-developed L-T0F distance measurement technology improves environmental light immunity and measurement accuracy.A stable and fixed 40-meter measurement radiusEven at 70% reflectance, RPLiDAR S3 can ensure an a...

SKU: DF-SEN0296

This is a square flexible thin film pressure sensor of short legs with a side length of 40mm, which can be used to realize highly sensitive detection of pressure. The sensor is durable and designed to sense static and dynamic pressure in a high respond speed. Its advantages of recording the inten...

SKU: AF-919

This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with a RP-SMA jack on one end and an SMA Plug on the other. We a...

SKU: SF-WRL-09232

This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection. You should not need this adapter with any of ...

SKU: SF-WRL-18569

This RP-SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes this unassuming cable special is the slightly longer length of 150mm (compared to 100mm). We found that the extra 50mm makes all the difference when working with an enclos...